If enabled in user_config.h this will trigger the OMG to update it's firmware from the link
provided in the MQTT message.
Example message:
{\"version\":\"test\",\"password\":\"OMGPASSWORD\",\"url\":\"https://github.com/1technophile/OpenMQTTGateway/releases/download/v0.9.6/esp32dev-ble-cont-firmware.bin\"}
If the firmware version in the message is not the same as the current OMG version the device will self update using the link in the url of the message.
* Increased ESP32 base capabilities
1 - Expose SERIAL_BAUD as an optional compiler directive.
2 - Enabled mDNS based MQTT Host name lookup for ESP32 devices.
3 - Expand capability of ESPWifiManualSetup mode for multiple SSID’s.
Tested with ESP32
* Regression testing of ESP8266 and ESP32
* Removal of Wifi Debuging
* Fix lint issue
Co-authored-by: Northern Man <sgracey@Heisenberg.local>
* Support for changing CC1101 Receive and Transmit Frequency
* Docs
* Resolve feedback
* Update Somfy module to use Global receiveMhz
ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to
setting a new frequency
* Correct buffer processing
was missing an instruction due to a previous refactoring
* Correct duplicate condition
* Avoid publishing \n into the raw value
* Merge extract_char and value_from_service_data functions
* Initial generalization from a PWM LED controller, to a PWM controller.
Allow the config file to set the name of each channel and the number of channels.
Fade time is now per-channel, so MQTT messages can genuinely set an individual channel, and specify the fade time for that channel.
The default gamma is configurable in the config.
-replace low power led by led info
-enable to change the led ON value
-go upper case for the led macros
Also transform BLE connect warning to notice in log
Add Sonoff RF Bridge LED
* added support for secure TLS connections
on ESP32 and ESP8266 close#101
* added TLS test builds
* added documentation for TLS
fixed some some issues in the documentation
* added documentation for error code=54
* handle 64 bits values, except for UNO
Arduino UNO is not enough powerfull to handle properly uint64_t in terms of memory so differenciate the variable type depending on the board type
With this configuration ATMega will not be able to receive with simpleReceiving 64 bits values. Of course Json will work with 64 bits values for this board.
* Simplify jsondata.success() condition
* Renamings and optimize deduplication functions
* replace 2 dimensions array by a structure so as to handle the time with an uint32_t when using an ESP (instead of a uint64_t)
* change storeValue and isAduplicate function names
* point to the rcswitch revision with the new 40 bits protocol
Co-authored-by: Leon Kiefer <leon.k97@gmx.de>
* Add a lock mechanism to improve the OTA chances of success
change TimeBeforeMQTTconnect to InitialMQTTConnectionTimeout
move delay(BLEinterval); after the scan so the first scan will always be done at start now
remove non relevant delay
add stopProcessing and startProcessing functions
* Automatically set mqtt buffer size
Current versions of pubsubclient allows the buffer size to be set
dynamically: https://github.com/knolleary/pubsubclient/pull/282
We can take advantage of this to avoid having to modify one of the
dependencies and instead automatically up the buffer size when a
powerful board is detected.
reduce gateway name
reduce parameters size
correct issue when using advanced config network
comment simple receiving per default (it is set in platformio.ini when necessary)
Rename set commands to config
correct json buffer size and gateway name
replace state to cmd
replace set by config
add restart and erase command
add unicity to gateway command switches
BLE devices shouldn't be child of the gateway
make the BTtoMQTT topic consistent with other definitions
h2zero