Support for changing CC1101 Receive and Transmit Frequency (#847)

* Support for changing CC1101 Receive and Transmit Frequency

* Docs

* Resolve feedback

* Update Somfy module to use Global receiveMhz

ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to
setting a new frequency

docs/use/rf.md

@@ -61,6 +61,20 @@ You can add a "repeat" key/value to the MQTTto433 JSON message to override the d
 Example:
 `home/OpenMQTTGateway/commands/MQTTto433 {"value":1315156,"protocol":1,"length":24,"delay":317, "repeat":10}`
 
+### Set Transmit and Receive Frequency of CC1101 Transceiver Module
+
+Default transmit frequency of the CC1101 module is 433.92 Mhz, and this can be can changed by including the frequency in the transmit message.  Parameter is `mhz` and valid values are 300-348 Mhz, 387-464Mhz and 779-928Mhz.  Actual frequency support will depend on your CC1101 board.
+
+`home/OpenMQTTGateway/commands/MQTTto433 {"value":1150,"protocol":6,"length":12,"delay":450,"repeat":8,"mhz":303.732}`
+
+Default receive frequency of the CC1101 module is 433.92 Mhz, and this can be can changed by sending a message with the frequency.  Parameter is `mhz` and valid values are 300-348 Mhz, 387-464Mhz and 779-928Mhz.  Actual frequency support will depend on your CC1101 board
+
+`home/OpenMQTTGateway/commands/MQTTto433 {"mhz":315.026}`
+
+Messages received will include the frequency, and when transmitting on a different frequency the module return to the receive frequency afterwards.  ie transmit messages on 303.732 Mhz then receive messages on 433.92 Mhz 
+
+`{"value":4534142,"protocol":6,"length":26,"delay":356,"mhz":315.026}`
+
 ## Pilight gateway
 
 ### Receiving data from RF signal

main/User_config.h

@@ -384,6 +384,8 @@ uint8_t wifiProtocol = 0; // default mode, automatic selection
 #define subjectMQTTtoSYSset          "/commands/MQTTtoSYS/config"
 
 /*-------------------DEFINE LOG LEVEL----------------------*/
-#define LOG_LEVEL LOG_LEVEL_NOTICE
-
+#ifndef LOG_LEVEL
+#  define LOG_LEVEL LOG_LEVEL_NOTICE
 #endif
+
+#endif

main/ZactuatorSomfy.ino

@@ -71,7 +71,8 @@ void MQTTtoSomfy(char* topicOri, JsonObject& jsonData) {
     SomfyRemote somfyRemote(RF_EMITTER_GPIO, somfyRemotes[remoteIndex], &rollingCodeStorage);
     somfyRemote.sendCommand(command);
 #    ifdef ZradioCC1101
-    ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY); // set Receive on
+    ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to setting a new frequency
+    ELECHOUSE_cc1101.SetRx(receiveMhz); // set Receive on
 #    endif
   }
 }

main/ZgatewayRF.ino

@@ -61,8 +61,7 @@ void setupRF() {
   Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
 #  ifdef ZradioCC1101 //receiving with CC1101
   ELECHOUSE_cc1101.Init();
-  ELECHOUSE_cc1101.setMHZ(CC1101_FREQUENCY);
-  ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
+  ELECHOUSE_cc1101.SetRx(receiveMhz);
 #  endif
 #  ifdef RF_DISABLE_TRANSMIT
   mySwitch.disableTransmit();
@@ -76,7 +75,11 @@ void setupRF() {
 
 void RFtoMQTT() {
   if (mySwitch.available()) {
+#  ifdef ZradioCC1101 //receiving with CC1101
+    const int JSON_MSG_CALC_BUFFER = JSON_OBJECT_SIZE(5);
+#  else
     const int JSON_MSG_CALC_BUFFER = JSON_OBJECT_SIZE(4);
+#  endif
     StaticJsonBuffer<JSON_MSG_CALC_BUFFER> jsonBuffer;
     JsonObject& RFdata = jsonBuffer.createObject();
     Log.trace(F("Rcv. RF" CR));
@@ -88,6 +91,9 @@ void RFtoMQTT() {
     RFdata.set("protocol", (int)mySwitch.getReceivedProtocol());
     RFdata.set("length", (int)mySwitch.getReceivedBitlength());
     RFdata.set("delay", (int)mySwitch.getReceivedDelay());
+#  ifdef ZradioCC1101 // set Receive off and Transmitt on
+    RFdata.set("mhz", receiveMhz);
+#  endif
     mySwitch.resetAvailable();
 
     if (!isAduplicateSignal(MQTTvalue) && MQTTvalue != 0) { // conditions to avoid duplications of RF -->MQTT
@@ -109,7 +115,7 @@ void RFtoMQTT() {
 #  ifdef simpleReceiving
 void MQTTtoRF(char* topicOri, char* datacallback) {
 #    ifdef ZradioCC1101 // set Receive off and Transmitt on
-  ELECHOUSE_cc1101.SetTx(CC1101_FREQUENCY);
+  ELECHOUSE_cc1101.SetTx(receiveMhz);
   mySwitch.disableReceive();
   mySwitch.enableTransmit(RF_EMITTER_GPIO);
 #    endif
@@ -161,7 +167,8 @@ void MQTTtoRF(char* topicOri, char* datacallback) {
     pub(subjectGTWRFtoMQTT, datacallback); // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
   }
 #    ifdef ZradioCC1101 // set Receive on and Transmitt off
-  ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
+  ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to setting a new frequency
+  ELECHOUSE_cc1101.SetRx(receiveMhz);
   mySwitch.disableTransmit();
   mySwitch.enableReceive(RF_RECEIVER_GPIO);
 #    endif
@@ -170,11 +177,6 @@ void MQTTtoRF(char* topicOri, char* datacallback) {
 
 #  ifdef jsonReceiving
 void MQTTtoRF(char* topicOri, JsonObject& RFdata) { // json object decoding
-#    ifdef ZradioCC1101 // set Receive off and Transmitt on
-  ELECHOUSE_cc1101.SetTx(CC1101_FREQUENCY);
-  mySwitch.disableReceive();
-  mySwitch.enableTransmit(RF_EMITTER_GPIO);
-#    endif
   if (cmpToMainTopic(topicOri, subjectMQTTtoRF)) {
     Log.trace(F("MQTTtoRF json" CR));
     SIGNAL_SIZE_UL_ULL data = RFdata["value"];
@@ -186,6 +188,15 @@ void MQTTtoRF(char* topicOri, JsonObject& RFdata) { // json object decoding
       Log.notice(F("RF Protocol:%d" CR), valuePRT);
       Log.notice(F("RF Pulse Lgth: %d" CR), valuePLSL);
       Log.notice(F("Bits nb: %d" CR), valueBITS);
+#    ifdef ZradioCC1101 // set Receive off and Transmitt on
+      float trMhz = RFdata["mhz"] | CC1101_FREQUENCY;
+      if (validFrequency((int)trMhz)) {
+        ELECHOUSE_cc1101.SetTx(trMhz);
+        Log.notice(F("Transmit mhz: %F" CR), trMhz);
+        mySwitch.disableReceive();
+        mySwitch.enableTransmit(RF_EMITTER_GPIO);
+      }
+#    endif
       mySwitch.setRepeatTransmit(valueRPT);
       mySwitch.setProtocol(valuePRT, valuePLSL);
       mySwitch.send(data, valueBITS);
@@ -193,14 +204,43 @@ void MQTTtoRF(char* topicOri, JsonObject& RFdata) { // json object decoding
       pub(subjectGTWRFtoMQTT, RFdata); // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
       mySwitch.setRepeatTransmit(RF_EMITTER_REPEAT); // Restore the default value
     } else {
+#    ifdef ZradioCC1101 // set Receive on and Transmitt off
+      float tempMhz = RFdata["mhz"];
+      if (tempMhz != 0 && validFrequency((int)tempMhz)) {
+        receiveMhz = tempMhz;
+        Log.notice(F("Receive mhz: %F" CR), receiveMhz);
+        pub(subjectGTWRFtoMQTT, RFdata); // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
+      } else {
+        pub(subjectGTWRFtoMQTT, "{\"Status\": \"Error\"}"); // Fail feedback
+        Log.error(F("MQTTtoRF Fail json" CR));
+      }
+#    else
+#      ifndef ARDUINO_AVR_UNO // Space issues with the UNO
+      pub(subjectGTWRFtoMQTT, "{\"Status\": \"error\"}"); // Fail feedback
+#      endif
       Log.error(F("MQTTtoRF Fail json" CR));
+#    endif
     }
   }
 #    ifdef ZradioCC1101 // set Receive on and Transmitt off
-  ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
+  ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to setting a new frequency
+  ELECHOUSE_cc1101.SetRx(receiveMhz);
   mySwitch.disableTransmit();
   mySwitch.enableReceive(RF_RECEIVER_GPIO);
 #    endif
 }
 #  endif
 #endif
+
+#ifdef ZradioCC1101
+bool validFrequency(int mhz) {
+  //  CC1101 valid frequencies 300-348 MHZ, 387-464MHZ and 779-928MHZ.
+  if (mhz >= 300 && mhz <= 348)
+    return true;
+  if (mhz >= 387 && mhz <= 464)
+    return true;
+  if (mhz >= 779 && mhz <= 928)
+    return true;
+  return false;
+}
+#endif

main/config_RF.h

@@ -82,7 +82,13 @@ extern void MQTTtoPilight(char* topicOri, JsonObject& RFdata);
 
 /*-------------------CC1101 frequency----------------------*/
 //Match frequency to the hardware version of the radio if ZradioCC1101 is used.
-#define CC1101_FREQUENCY 433.92
+#ifndef CC1101_FREQUENCY
+#  define CC1101_FREQUENCY 433.92
+#endif
+// Allow ZGatewayRF Module to change receive frequency of CC1101 Transceiver module
+#ifdef ZradioCC1101
+float receiveMhz = CC1101_FREQUENCY;
+#endif
 
 /*-------------------PIN DEFINITIONS----------------------*/
 #ifndef RF_RECEIVER_GPIO

main/main.ino

@@ -493,7 +493,7 @@ void connectMQTT() {
 #ifdef ZgatewayIR
       client.subscribe(subjectMultiGTWIR); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
 #endif
-      Log.trace(F("Subscription OK to the subjects" CR));
+      Log.trace(F("Subscription OK to the subjects %s" CR), topic2);
     }
   } else {
     failure_number_mqtt++; // we count the failure

platformio.ini

@@ -111,7 +111,7 @@ dallastemperature = DallasTemperature
 m5stickc = M5StickC@0.2.0
 m5stickcp = https://github.com/m5stack/M5StickC-Plus.git
 m5stack = M5Stack@0.3.0
-smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.3.5
+smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.5.2
 stl = https://github.com/mike-matera/ArduinoSTL.git#7411816
 shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library
 somfy_remote=Somfy_Remote_Lib@0.2.0