Add ESP32 Olimex ethernet gateway (#747)

-Add ethernet board -Add wifi board -Add ethernet management for ESP32
2020-09-02 14:16:48 -05:00
1 parent ef39e14497
commit 5810420d93
@@ -1,6 +1,8 @@
-# Wifi and MQTT configuration portal
+# Wifi and MQTT configuration

-Once loaded into your board and if you don't use the manual configuration you have to set your network parameters with wifi manager portal.
+## Wifi and MQTT configuration portal for Wifi boards
+
+Once loaded into your ESP and if you don't use the manual configuration you have to set your network parameters with wifi manager portal.
 From your smartphone search for your OpenMQTTGateway wifi network and connect to it with `WifiManager_password` (the default password is "your_password"), a web page will appear.

 ![Wifi manager menu](../img/OpenMQTTGateway_Wifi_Manager_menu.png)
@@ -30,3 +32,27 @@ home/OpenMQTTGateway/version
 ```

 Note that the web portal appears only on first boot, if you want to configure again the setting you can do a long press on TRIGGER_GPIO or [erase the settings](../use/gateway.md#erase-the-esp-settings).
+
+## MQTT and network configuration for Ethernet and Wifi boards
+
+You can configure your MQTT server credentials and network configuration before building the application. It can be done either in Arduino or in Platformio IDE thought the User_config.h file. Note that with Platformio IDE you can also set your credentials into the platformio.ini file or an *_env.ini file, here is an example with the Olimex ESP32 gateway:
+
+``` ini
+[env:esp32-olimex-gtw-ble]
+platform = ${com.esp32_platform}
+board = esp32-gateway
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.ble}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLED_INFO=33'
+  '-DLED_INFO_ON=1'
+  '-DESP32_ETHERNET=true'
+  '-DMQTT_SERVER="11.22.33.44"'
+  '-DMQTT_USER="salut"'
+  '-DMQTT_PASS="atoi"'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_OLM_GTW"'
+```
@@ -79,6 +79,8 @@ const byte ip[] = {192, 168, 1, 99};
 const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield mac adress
 #endif

+//#define ESP32_ETHERNET=true // Uncomment to use Ethernet module on OLIMEX ESP32 Ethernet gateway
+
 #if defined(ESPWifiManualSetup) // for nodemcu, weemos and esp8266
 #  ifndef wifi_ssid
 #    define wifi_ssid "wifi ssid"
@@ -155,6 +155,13 @@ unsigned long timer_led_measures = 0;
 #  include <SPIFFS.h>
 #  include <esp_wifi.h>

+#  ifdef ESP32_ETHERNET
+#    define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT
+#    define ETH_PHY_POWER 12
+#    include <ETH.h>
+void WiFiEvent(WiFiEvent_t event);
+static bool esp32EthConnected = false;
+#  endif
 #  ifdef SECURE_CONNECTION
 #    include <WiFiClientSecure.h>
 WiFiClientSecure eClient;
@@ -472,7 +479,7 @@ void connectMQTT() {
    delay(1000);
    digitalWrite(LED_INFO, !LED_INFO_ON);
    delay(4000);
-#if defined(ESP8266) || defined(ESP32)
+#if defined(ESP8266) || defined(ESP32) && !defined(ESP32_ETHERNET)
    disconnection_handling(failure_number_mqtt);
 #endif
  }
@@ -522,16 +529,18 @@ void setup() {
 #    endif
 #  endif

-  Log.trace(F("OpenMQTTGateway Wifi protocol used: %d" CR), wifiProtocol);
-
-#  if defined(ESPWifiManualSetup)
+#  ifdef ESP32_ETHERNET
+  setup_ethernet_esp32();
+#  else // WIFI ESP
+#    if defined(ESPWifiManualSetup)
  setup_wifi();
-#  else
+#    else
  setup_wifimanager(false);
-#  endif
-
+#    endif
+  Log.trace(F("OpenMQTTGateway Wifi protocol used: %d" CR), wifiProtocol);
  Log.trace(F("OpenMQTTGateway mac: %s" CR), WiFi.macAddress().c_str());
  Log.trace(F("OpenMQTTGateway ip: %s" CR), WiFi.localIP().toString().c_str());
+#  endif

  setOTA();
 #  ifdef SECURE_CONNECTION
@@ -1045,7 +1054,53 @@ void setup_wifimanager(bool reset_settings) {
    //end save
  }
 }
+#  ifdef ESP32_ETHERNET
+void setup_ethernet_esp32() {
+  bool ethBeginSuccess = false;
+  WiFi.onEvent(WiFiEvent);
+#    ifdef NetworkAdvancedSetup
+  Log.trace(F("Adv eth cfg" CR));
+  ETH.config(ip, gateway, subnet, Dns);
+  ethBeginSuccess = ETH.begin();
+#    else
+  Log.trace(F("Spl eth cfg" CR));
+  ethBeginSuccess = ETH.begin();
+#    endif
+  Log.trace(F("Connecting to Ethernet" CR));
+  while (!esp32EthConnected) {
+    delay(500);
+    Log.trace(F("." CR));
+  }
+}

+void WiFiEvent(WiFiEvent_t event) {
+  switch (event) {
+    case SYSTEM_EVENT_ETH_START:
+      Log.trace(F("Ethernet Started" CR));
+      ETH.setHostname(gateway_name);
+      break;
+    case SYSTEM_EVENT_ETH_CONNECTED:
+      Log.notice(F("Ethernet Connected" CR));
+      break;
+    case SYSTEM_EVENT_ETH_GOT_IP:
+      Log.trace(F("OpenMQTTGateway mac: %s" CR), ETH.macAddress().c_str());
+      Log.trace(F("OpenMQTTGateway ip: %s" CR), ETH.localIP().toString().c_str());
+      Log.trace(F("OpenMQTTGateway link speed: %d Mbps" CR), ETH.linkSpeed());
+      esp32EthConnected = true;
+      break;
+    case SYSTEM_EVENT_ETH_DISCONNECTED:
+      Log.error(F("Ethernet Disconnected" CR));
+      esp32EthConnected = false;
+      break;
+    case SYSTEM_EVENT_ETH_STOP:
+      Log.error(F("Ethernet Stopped" CR));
+      esp32EthConnected = false;
+      break;
+    default:
+      break;
+  }
+}
+#  endif
 #else // Arduino case
 void setup_ethernet() {
 #  ifdef NetworkAdvancedSetup
@@ -1109,7 +1164,11 @@ void loop() {
  }

 #if defined(ESP8266) || defined(ESP32)
+#  ifdef ESP32_ETHERNET
+  if (esp32EthConnected) {
+#  else
  if (WiFi.status() == WL_CONNECTED) {
+#  endif
    ArduinoOTA.handle();
 #else
  if ((Ethernet.hardwareStatus() != EthernetW5100 && Ethernet.linkStatus() == LinkON) || (Ethernet.hardwareStatus() == EthernetW5100)) { //we are able to detect disconnection only on w5200 and w5500
@@ -1215,16 +1274,17 @@ void loop() {
      connectMQTT();
    }
  } else { // disconnected from network
-#if defined(ESP8266) || defined(ESP32)
-    Log.warning(F("wifi disconnected" CR));
+    Log.warning(F("Network disconnected:" CR));
    digitalWrite(LED_INFO, LED_INFO_ON);
    delay(5000); // add a delay to avoid ESP32 crash and reset
    digitalWrite(LED_INFO, !LED_INFO_ON);
    delay(5000);
+#if defined(ESP8266) || defined(ESP32) && !defined(ESP32_ETHERNET)
+    Log.warning(F("wifi" CR));
    failure_number_ntwk++;
    disconnection_handling(failure_number_ntwk);
 #else
-    Log.warning(F("eth disconnected" CR));
+    Log.warning(F("ethernet" CR));
 #endif
  }
 // Function that doesn't need an active connection
@@ -1245,6 +1305,12 @@ void stateMeasures() {
  uint32_t freeMem;
  freeMem = ESP.getFreeHeap();
  SYSdata["freemem"] = freeMem;
+#    ifdef ESP32_ETHERNET
+  SYSdata["mac"] = (char*)ETH.macAddress().c_str();
+  SYSdata["ip"] = ip2CharArray(ETH.localIP());
+  ETH.fullDuplex() ? SYSdata["fd"] = (bool)"true" : SYSdata["fd"] = (bool)"false";
+  SYSdata["linkspeed"] = (int)ETH.linkSpeed();
+#    else
  long rssi = WiFi.RSSI();
  SYSdata["rssi"] = rssi;
  String SSID = WiFi.SSID();
@@ -1253,8 +1319,7 @@ void stateMeasures() {
  String mac = WiFi.macAddress();
  SYSdata["mac"] = (char*)mac.c_str();
  SYSdata["wifiprt"] = (int)wifiProtocol;
-#  else
-  SYSdata["ip"] = ip2CharArray(Ethernet.localIP());
+#    endif
 #  endif
  String modules = "";
 #  ifdef ZgatewayRF
@@ -37,6 +37,8 @@ extra_configs =
 ;default_envs = esp32dev-weatherstation
 ;default_envs = esp32dev-ir
 ;default_envs = esp32dev-ble
+;default_envs = esp32-olimex-gtw-ble-eth
+;default_envs = esp32-olimex-gtw-ble-wifi
 ;default_envs = esp32-m5stick-ble
 ;default_envs = esp32-m5stack-ble
 ;default_envs = esp32-m5stick-c-ble
@@ -291,6 +293,36 @@ build_flags =
  '-DLED_RECEIVE_ON=0'
  '-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'

+[env:esp32-olimex-gtw-ble-eth]
+platform = ${com.esp32_platform}
+board = esp32-gateway
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.ble}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLOW_POWER_LED=33'
+  '-DLOW_POWER_LED_OFF=0'
+  '-DESP32_ETHERNET=true'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_OLM_GTWE"'
+
+[env:esp32-olimex-gtw-ble-wifi]
+platform = ${com.esp32_platform}
+board = esp32-gateway
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.ble}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLOW_POWER_LED=33'
+  '-DLOW_POWER_LED_OFF=0'
+  '-DTRIGGER_GPIO=34'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_OLM_GTWW"'
+
 [env:esp32-m5stick-ble]
 platform = ${com.esp32_platform}
 board = m5stack-core-esp32