chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

Replace pin by gpio (#631)

Browse Source 
* replace _PIN by _GPIO

* add mention about the goal of -all binaries

* [breaking] change json key from "pin" to "gpio" for actuatorONOFF
This commit is contained in:
Florian authored and GitHub committed 2020-06-13 20:04:36 -05:00
1 parent c9de14e51a
commit c9e6de1a1c
37 files changed
+198 -197
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

docs/setitup/gsm.md
+1 -1
View File
@@ -19,6 +19,6 @@ For VCC5 you can power it directly all the time with an USB cable or use a MOSFE
Don't use the nodemcu/wemos 5V pin for the A6/7 power, use a dedicated power supply for both or dedicated to the A6/7 with at least 2 amps ability.
So as to start your A6/7 module press the red button for 4 seconds, or link the PWR_KEY pin to VCC5.0 for the same time.
So as to start your A6/7 module press the red button for 4 seconds, or link the PWR_KEY GPIO to VCC5.0 for the same time.
![Addon_2G](../img/OpenMQTTgateway_ESP8266_Addon_2G.png)
docs/upload/binaries.md
+1
View File
@@ -3,6 +3,7 @@ This section is usefull if you want to directly flash your ESP from your desktop
Nevertheless you will not be able to change advanced parameters, if you want to do so refer to [Upload from PlatformIO][pio] section.
Download the binary corresponding to your board and gateway [here](https://github.com/1technophile/OpenMQTTGateway/releases) from github and uncompress it.
Note that the -all binary packages are produced for tests only.
## ESP32
* Download the bootloader [here](https://github.com/espressif/arduino-esp32/raw/master/tools/sdk/bin/bootloader_dio_80m.bin)
docs/upload/portal.md
+1 -1
View File
@@ -31,4 +31,4 @@ home/OpenMQTTGateway/LWT Online
home/OpenMQTTGateway/version
```
Note that the web portal appears only on first boot, if you want to configure again the setting you can do a long press on TRIGGER_PIN or [erase the settings](../use/gateway.md#erase-the-esp-settings).
Note that the web portal appears only on first boot, if you want to configure again the setting you can do a long press on TRIGGER_GPIO or [erase the settings](../use/gateway.md#erase-the-esp-settings).
docs/upload/troubleshoot.md
+2 -2
View File
@@ -31,10 +31,10 @@ Regarding the IR led emitter you can replace it with a normal led and see if it
try with D2 instead of D3
and put
`#define RF_RECEIVER_PIN 4 // D2 on nodemcu`
`#define RF_RECEIVER_GPIO 4 // D2 on nodemcu`
in config_rf.h
instead of
`#define RF_RECEIVER_PIN 0 // D3 on nodemcu`
`#define RF_RECEIVER_GPIO 0 // D3 on nodemcu`
## Exception seen on serial monitor:
Hey I got a callback
docs/use/actuators.md
+3 -3
View File
@@ -3,7 +3,7 @@
This module enables to actuate things by giving to a PIN a HIGH or LOW value corresponding to an MQTT topic.
Example usage: Connect a transistor to power a relay, connect a led...
So as to pilot the pin use the following commands with [simple receiving](../upload/pio.md#api):
So as to pilot the GPIO use the following commands with [simple receiving](../upload/pio.md#api):
OFF command:
`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF/setOFF -m 15`
@@ -14,10 +14,10 @@ ON command
or with [json receiving](../upload/pio.md#api)
OFF command:
`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"pin":15,"cmd":0}'`
`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"gpio":15,"cmd":0}'`
ON command
`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"pin":15,"cmd":1}'`
`mosquitto_pub -t home/OpenMQTTGateway_MEGA/commands/MQTTtoONOFF -m '{"gpio":15,"cmd":1}'`
## FASTLED
### The FASTLED module support 2 different operation modes
main/User_config.h
+3 -3
View File
@@ -240,11 +240,11 @@ uint8_t wifiProtocol = 0; // default mode, automatic selection
# endif
#endif
#ifndef TRIGGER_PIN
#ifndef TRIGGER_GPIO
# ifdef ESP8266
# define TRIGGER_PIN 14 // pin D5 as full reset button (long press >10s)
# define TRIGGER_GPIO 14 // pin D5 as full reset button (long press >10s)
# elif ESP32
# define TRIGGER_PIN 0 // boot button as full reset button (long press >10s)
# define TRIGGER_GPIO 0 // boot button as full reset button (long press >10s)
# endif
#endif
main/ZactuatorFASTLED.ino
+2 -2
View File
@@ -42,10 +42,10 @@ const long fireUpdate = 10;
CRGBPalette16 gPal;
void setupFASTLED() {
Log.notice(F("FASTLED_DATA_PIN: %d" CR), FASTLED_DATA_PIN);
Log.notice(F("FASTLED_DATA_GPIO: %d" CR), FASTLED_DATA_GPIO);
Log.notice(F("FASTLED_NUM_LEDS: %d" CR), FASTLED_NUM_LEDS);
Log.trace(F("ZactuatorFASTLED setup done " CR));
FastLED.addLeds<FASTLED_TYPE, FASTLED_DATA_PIN>(leds, FASTLED_NUM_LEDS);
FastLED.addLeds<FASTLED_TYPE, FASTLED_DATA_GPIO>(leds, FASTLED_NUM_LEDS);
}
//returns the current step of the animation
main/ZactuatorONOFF.ino
+9 -9
View File
@@ -4,7 +4,7 @@
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
Output pin defined to High or Low
Output GPIO defined to High or Low
Copyright: (c)Florian ROBERT
@@ -35,12 +35,12 @@ void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
if (cmpToMainTopic(topicOri, subjectMQTTtoONOFF)) {
Log.trace(F("MQTTtoONOFF json data analysis" CR));
int boolSWITCHTYPE = ONOFFdata["cmd"] | 99;
int pin = ONOFFdata["pin"] | ACTUATOR_ONOFF_PIN;
int gpio = ONOFFdata["gpio"] | ACTUATOR_ONOFF_GPIO;
if (boolSWITCHTYPE != 99) {
Log.notice(F("MQTTtoONOFF boolSWITCHTYPE ok: %d" CR), boolSWITCHTYPE);
Log.notice(F("Pin number: %d" CR), pin);
pinMode(pin, OUTPUT);
digitalWrite(pin, boolSWITCHTYPE);
Log.notice(F("GPIO number: %d" CR), gpio);
pinMode(gpio, OUTPUT);
digitalWrite(gpio, boolSWITCHTYPE);
// we acknowledge the sending by publishing the value to an acknowledgement topic
pub(subjectGTWONOFFtoMQTT, ONOFFdata);
} else {
@@ -54,9 +54,9 @@ void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
void MQTTtoONOFF(char* topicOri, char* datacallback) {
if ((cmpToMainTopic(topicOri, subjectMQTTtoONOFF))) {
Log.trace(F("MQTTtoONOFF" CR));
int pin = strtol(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
Log.notice(F("Pin number: %d" CR), pin);
pinMode(pin, OUTPUT);
int gpio = strtol(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
Log.notice(F("GPIO number: %d" CR), gpio);
pinMode(gpio, OUTPUT);
bool ON = false;
if (strstr(topicOri, ONKey) != NULL)
@@ -64,7 +64,7 @@ void MQTTtoONOFF(char* topicOri, char* datacallback) {
if (strstr(topicOri, OFFKey) != NULL)
ON = false;
digitalWrite(pin, ON);
digitalWrite(gpio, ON);
// we acknowledge the sending by publishing the value to an acknowledgement topic
char b = ON;
pub(subjectGTWONOFFtoMQTT, &b);
main/Zgateway2G.ino
+5 -5
View File
@@ -33,24 +33,24 @@
# include <ArduinoJson.h>
// Instantiate the library with TxPin, RxPin.
A6lib A6l(_2G_TX_PIN, _2G_RX_PIN); //D6 to A6 RX, D7 to A6 TX
A6lib A6l(_2G_TX_GPIO, _2G_RX_GPIO); //D6 to A6 RX, D7 to A6 TX
int unreadSMSLocs[50] = {0};
int unreadSMSNum = 0;
SMSmessage sms;
void setup2G() {
Log.notice(F("_2G_TX_PIN: %d " CR), _2G_TX_PIN);
Log.notice(F("_2G_RX_PIN: %d " CR), _2G_RX_PIN);
Log.notice(F("_2G_TX_GPIO: %d " CR), _2G_TX_GPIO);
Log.notice(F("_2G_RX_GPIO: %d " CR), _2G_RX_GPIO);
setupGSM(false);
Log.trace(F("Zgateway2G setup done " CR));
}
void setupGSM(bool deleteSMS) {
Log.trace(F("Init 2G module: %d" CR), _2G_PWR_PIN);
Log.trace(F("Init 2G module: %d" CR), _2G_PWR_GPIO);
delay(1000);
// Power-cycle the module to reset it.
A6l.powerCycle(_2G_PWR_PIN);
A6l.powerCycle(_2G_PWR_GPIO);
Log.notice(F("waiting for network connection at bd: %d" CR), _2G_MODULE_BAUDRATE);
A6l.blockUntilReady(_2G_MODULE_BAUDRATE);
Log.notice(F("A6/A7 gsm ready" CR));
main/ZgatewayIR.ino
+6 -6
View File
@@ -35,14 +35,14 @@
# include <IRsend.h> // Needed if you want to send IR commands.
# include <IRutils.h>
# ifdef DumpMode // in dump mode we increase the size of the buffer to catch big codes
IRrecv irrecv(IR_RECEIVER_PIN, 1024, 15U, true);
IRrecv irrecv(IR_RECEIVER_GPIO, 1024, 15U, true);
# else
IRrecv irrecv(IR_RECEIVER_PIN);
IRrecv irrecv(IR_RECEIVER_GPIO);
# endif
IRsend irsend(IR_EMITTER_PIN);
IRsend irsend(IR_EMITTER_GPIO);
# else
# include <IRremote.h>
IRrecv irrecv(IR_RECEIVER_PIN);
IRrecv irrecv(IR_RECEIVER_GPIO);
IRsend irsend; //connect IR emitter pin to D9 on arduino, you need to comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library IRremote.h so as to free pin D3 for RF RECEIVER PIN
# endif
@@ -102,8 +102,8 @@ void setupIR() {
irrecv.enableIRIn(); // Start the receiver
Log.notice(F("IR_EMITTER_PIN: %d " CR), IR_EMITTER_PIN);
Log.notice(F("IR_RECEIVER_PIN: %d " CR), IR_RECEIVER_PIN);
Log.notice(F("IR_EMITTER_GPIO: %d " CR), IR_EMITTER_GPIO);
Log.notice(F("IR_RECEIVER_GPIO: %d " CR), IR_RECEIVER_GPIO);
Log.trace(F("ZgatewayIR setup done " CR));
}
main/ZgatewayPilight.ino
+5 -5
View File
@@ -34,7 +34,7 @@
# endif
# include <ESPiLight.h>
ESPiLight rf(RF_EMITTER_PIN); // use -1 to disable transmitter
ESPiLight rf(RF_EMITTER_GPIO); // use -1 to disable transmitter
void pilightCallback(const String& protocol, const String& message, int status,
size_t repeats, const String& deviceID) {
@@ -66,10 +66,10 @@ void setupPilight() {
rf.enableReceiver();
# endif
rf.setCallback(pilightCallback);
rf.initReceiver(RF_RECEIVER_PIN);
pinMode(RF_EMITTER_PIN, OUTPUT); // Set this here, because if this is the RX pin it was reset to INPUT by Serial.end();
Log.notice(F("RF_EMITTER_PIN: %d " CR), RF_EMITTER_PIN);
Log.notice(F("RF_RECEIVER_PIN: %d " CR), RF_RECEIVER_PIN);
rf.initReceiver(RF_RECEIVER_GPIO);
pinMode(RF_EMITTER_GPIO, OUTPUT); // Set this here, because if this is the RX pin it was reset to INPUT by Serial.end();
Log.notice(F("RF_EMITTER_GPIO: %d " CR), RF_EMITTER_GPIO);
Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
Log.trace(F("ZgatewayPilight setup done " CR));
# else
Log.trace(F("ZgatewayPilight setup cannot be done, comment first ZgatewayRF && ZgatewayRF2" CR));
main/ZgatewayRF.ino
+8 -8
View File
@@ -56,16 +56,16 @@ void RFtoMQTTdiscovery(unsigned long MQTTvalue) { //on the fly switch creation f
void setupRF() {
//RF init parameters
Log.notice(F("RF_EMITTER_PIN: %d " CR), RF_EMITTER_PIN);
Log.notice(F("RF_RECEIVER_PIN: %d " CR), RF_RECEIVER_PIN);
Log.notice(F("RF_EMITTER_GPIO: %d " CR), RF_EMITTER_GPIO);
Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
# ifdef ZradioCC1101 //receiving with CC1101
ELECHOUSE_cc1101.Init();
ELECHOUSE_cc1101.setMHZ(CC1101_FREQUENCY);
ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
# endif
mySwitch.enableTransmit(RF_EMITTER_PIN);
mySwitch.enableTransmit(RF_EMITTER_GPIO);
mySwitch.setRepeatTransmit(RF_EMITTER_REPEAT);
mySwitch.enableReceive(RF_RECEIVER_PIN);
mySwitch.enableReceive(RF_RECEIVER_GPIO);
Log.trace(F("ZgatewayRF setup done" CR));
}
@@ -105,7 +105,7 @@ void MQTTtoRF(char* topicOri, char* datacallback) {
# ifdef ZradioCC1101 // set Receive off and Transmitt on
ELECHOUSE_cc1101.SetTx(CC1101_FREQUENCY);
mySwitch.disableReceive();
mySwitch.enableTransmit(RF_EMITTER_PIN);
mySwitch.enableTransmit(RF_EMITTER_GPIO);
# endif
unsigned long data = strtoul(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
@@ -157,7 +157,7 @@ void MQTTtoRF(char* topicOri, char* datacallback) {
# ifdef ZradioCC1101 // set Receive on and Transmitt off
ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
mySwitch.disableTransmit();
mySwitch.enableReceive(RF_RECEIVER_PIN);
mySwitch.enableReceive(RF_RECEIVER_GPIO);
# endif
}
# endif
@@ -167,7 +167,7 @@ void MQTTtoRF(char* topicOri, JsonObject& RFdata) { // json object decoding
# ifdef ZradioCC1101 // set Receive off and Transmitt on
ELECHOUSE_cc1101.SetTx(CC1101_FREQUENCY);
mySwitch.disableReceive();
mySwitch.enableTransmit(RF_EMITTER_PIN);
mySwitch.enableTransmit(RF_EMITTER_GPIO);
# endif
if (cmpToMainTopic(topicOri, subjectMQTTtoRF)) {
Log.trace(F("MQTTtoRF json" CR));
@@ -193,7 +193,7 @@ void MQTTtoRF(char* topicOri, JsonObject& RFdata) { // json object decoding
# ifdef ZradioCC1101 // set Receive on and Transmitt off
ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
mySwitch.disableTransmit();
mySwitch.enableReceive(RF_RECEIVER_PIN);
mySwitch.enableReceive(RF_RECEIVER_GPIO);
# endif
}
# endif
main/ZgatewayRF2.ino
+7 -7
View File
@@ -62,13 +62,13 @@ void setupRF2() {
ELECHOUSE_cc1101.setMHZ(CC1101_FREQUENCY);
ELECHOUSE_cc1101.SetRx(CC1101_FREQUENCY);
# endif
NewRemoteReceiver::init(RF_RECEIVER_PIN, 2, rf2Callback);
Log.notice(F("RF_EMITTER_PIN: %d " CR), RF_EMITTER_PIN);
Log.notice(F("RF_RECEIVER_PIN: %d " CR), RF_RECEIVER_PIN);
NewRemoteReceiver::init(RF_RECEIVER_GPIO, 2, rf2Callback);
Log.notice(F("RF_EMITTER_GPIO: %d " CR), RF_EMITTER_GPIO);
Log.notice(F("RF_RECEIVER_GPIO: %d " CR), RF_RECEIVER_GPIO);
Log.trace(F("ZgatewayRF2 setup done " CR));
# endif
pinMode(RF_EMITTER_PIN, OUTPUT);
digitalWrite(RF_EMITTER_PIN, LOW);
pinMode(RF_EMITTER_GPIO, OUTPUT);
digitalWrite(RF_EMITTER_GPIO, LOW);
}
void RF2toMQTT() {
@@ -161,7 +161,7 @@ void MQTTtoRF2(char* topicOri, char* datacallback) {
valuePERIOD = 272;
NewRemoteReceiver::disable();
Log.trace(F("Creating transmitter" CR));
NewRemoteTransmitter transmitter(valueCODE, RF_EMITTER_PIN, valuePERIOD);
NewRemoteTransmitter transmitter(valueCODE, RF_EMITTER_GPIO, valuePERIOD);
Log.trace(F("Sending data" CR));
if (valueGROUP) {
if (isDimCommand) {
@@ -237,7 +237,7 @@ void MQTTtoRF2(char* topicOri, JsonObject& RF2data) { // json object decoding
if (valuePERIOD == 0)
valuePERIOD = 272;
NewRemoteReceiver::disable();
NewRemoteTransmitter transmitter(valueCODE, RF_EMITTER_PIN, valuePERIOD);
NewRemoteTransmitter transmitter(valueCODE, RF_EMITTER_GPIO, valuePERIOD);
Log.trace(F("Sending" CR));
if (valueGROUP) {
if (isDimCommand) {
main/ZgatewayWeatherStation.ino
+2 -2
View File
@@ -27,7 +27,7 @@
#ifdef ZgatewayWeatherStation
# include <WeatherStationDataRx.h>
WeatherStationDataRx wsdr(RF_WS_RECEIVER_PIN, true);
WeatherStationDataRx wsdr(RF_WS_RECEIVER_GPIO, true);
void PairedDeviceAdded(byte newID) {
# if defined(ESP8266) || defined(ESP32)
@@ -46,7 +46,7 @@ void PairedDeviceAdded(byte newID) {
}
void setupWeatherStation() {
Log.notice(F("RF_WS_RECEIVER_PIN %d" CR), RF_WS_RECEIVER_PIN);
Log.notice(F("RF_WS_RECEIVER_GPIO %d" CR), RF_WS_RECEIVER_GPIO);
wsdr.begin();
wsdr.pair(NULL, PairedDeviceAdded);
Log.trace(F("ZgatewayWeatherStation setup done " CR));
main/ZsensorADC.ino
+3 -3
View File
@@ -4,7 +4,7 @@
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
Analog pin reading Addon
Analog GPIO reading Addon
Copyright: (c)Florian ROBERT
@@ -38,7 +38,7 @@ ADC_MODE(ADC_TOUT);
unsigned long timeadc = 0;
void setupADC() {
Log.notice(F("Reading ADC on pin: %d" CR), ADC_PIN);
Log.notice(F("ADC_GPIO: %d" CR), ADC_GPIO);
}
void MeasureADC() {
@@ -48,7 +48,7 @@ void MeasureADC() {
# endif
timeadc = millis();
static int persistedadc;
int val = analogRead(ADC_PIN);
int val = analogRead(ADC_GPIO);
if (isnan(val)) {
Log.error(F("Failed to read from ADC !" CR));
} else {
main/ZsensorDHT.ino
+2 -2
View File
@@ -33,13 +33,13 @@
# include <DHT.h>
# include <DHT_U.h>
DHT dht(DHT_RECEIVER_PIN, DHT_SENSOR_TYPE);
DHT dht(DHT_RECEIVER_GPIO, DHT_SENSOR_TYPE);
//Time used to wait for an interval before resending temp and hum
unsigned long timedht = 0;
void setupDHT() {
Log.notice(F("Reading DHT on pin: %d" CR), DHT_RECEIVER_PIN);
Log.notice(F("Reading DHT on pin: %d" CR), DHT_RECEIVER_GPIO);
}
void MeasureTempAndHum() {
main/ZsensorDS1820.ino
+3 -3
View File
@@ -29,7 +29,7 @@
# include <DallasTemperature.h>
# include <OneWire.h>
OneWire owbus(DS1820_OWBUS_PIN);
OneWire owbus(DS1820_OWBUS_GPIO);
DallasTemperature ds1820(&owbus);
DeviceAddress ds1820_address, ds1820_devices[OW_MAX_SENSORS];
@@ -39,7 +39,7 @@ static String ds1820_type[OW_MAX_SENSORS];
static String ds1820_addr[OW_MAX_SENSORS];
void setupZsensorDS1820() {
Log.trace(F("DS1820: configured pin: %d for 1-wire bus" CR), DS1820_OWBUS_PIN);
Log.trace(F("DS1820: configured pin: %d for 1-wire bus" CR), DS1820_OWBUS_GPIO);
ds1820.begin();
// Search the OneWire bus for all devices
@@ -89,7 +89,7 @@ void setupZsensorDS1820() {
}
if (ds1820.getDS18Count() == 0) {
Log.error(F("DS1820: Failed to enumerate sensors on 1-wire bus. Check your pin assignment!" CR));
Log.error(F("DS1820: Failed to enumerate sensors on 1-wire bus. Check your GPIO assignment!" CR));
}
// make requestTemperatures() non-blocking
main/ZsensorGPIOInput.ino
+3 -3
View File
@@ -35,12 +35,12 @@ int InputState = 3; // Set to 3 so that it reads on startup
int lastInputState = 3;
void setupGPIOInput() {
Log.notice(F("Reading GPIO at pin: %d" CR), GPIOInput_PIN);
pinMode(GPIOInput_PIN, INPUT_PULLUP); // declare GPIOInput pin as input_pullup to prevent floating. Pin will be high when not connected to ground
Log.notice(F("Reading GPIO at pin: %d" CR), INPUT_GPIO);
pinMode(INPUT_GPIO, INPUT_PULLUP); // declare GPIOInput pin as input_pullup to prevent floating. Pin will be high when not connected to ground
}
void MeasureGPIOInput() {
int reading = digitalRead(GPIOInput_PIN);
int reading = digitalRead(INPUT_GPIO);
// check to see if you just pressed the button
// (i.e. the input went from LOW to HIGH), and you've waited long enough
main/ZsensorGPIOKeyCode.ino
+8 -8
View File
@@ -32,15 +32,15 @@ int lastInputStateGPIOKeyCode = 0x0f;
int lastLatchStateGPIOKeyCode = 0;
void setupGPIOKeyCode() {
pinMode(GPIOKeyCode_LATCH_PIN, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D0_PIN, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D1_PIN, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D2_PIN, INPUT_PULLUP); //
//pinMode(GPIOKeyCode_D3_PIN, INPUT_PULLUP); //
pinMode(GPIOKeyCode_LATCH_GPIO, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D0_GPIO, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D1_GPIO, INPUT_PULLUP); //
pinMode(GPIOKeyCode_D2_GPIO, INPUT_PULLUP); //
//pinMode(GPIOKeyCode_D3_GPIO, INPUT_PULLUP); //
}
void MeasureGPIOKeyCode() {
int latch = digitalRead(GPIOKeyCode_LATCH_PIN);
int latch = digitalRead(GPIOKeyCode_LATCH_GPIO);
// check to see if you just pressed the button
// (i.e. the input went from LOW to HIGH), and you've waited long enough
@@ -54,8 +54,8 @@ void MeasureGPIOKeyCode() {
# endif
// if the Input state has changed:
if (latch > 0 && lastLatchStateGPIOKeyCode != latch) {
int reading = digitalRead(GPIOKeyCode_D0_PIN) | (digitalRead(GPIOKeyCode_D1_PIN) << 1) | (digitalRead(GPIOKeyCode_D2_PIN) << 2);
//| digitalRead(GPIOKeyCode_D3_PIN) << 3;
int reading = digitalRead(GPIOKeyCode_D0_GPIO) | (digitalRead(GPIOKeyCode_D1_GPIO) << 1) | (digitalRead(GPIOKeyCode_D2_GPIO) << 2);
//| digitalRead(GPIOKeyCode_D3_GPIO) << 3;
char hex[3];
main/ZsensorHCSR04.ino
+8 -8
View File
@@ -34,10 +34,10 @@
unsigned long timeHCSR04 = 0;
void setupHCSR04() {
Log.notice(F("HCSR04 trigger pin: %d" CR), HCSR04_TRI_PIN);
Log.notice(F("HCSR04 echo pin: %d" CR), HCSR04_ECH_PIN);
pinMode(HCSR04_TRI_PIN, OUTPUT); // declare HC SR-04 trigger pin as output
pinMode(HCSR04_ECH_PIN, INPUT); // declare HC SR-04 echo pin as input
Log.notice(F("HCSR04 trigger pin: %d" CR), HCSR04_TRI_GPIO);
Log.notice(F("HCSR04 echo pin: %d" CR), HCSR04_ECH_GPIO);
pinMode(HCSR04_TRI_GPIO, OUTPUT); // declare HC SR-04 trigger GPIO as output
pinMode(HCSR04_ECH_GPIO, INPUT); // declare HC SR-04 echo GPIO as input
}
void MeasureDistance() {
@@ -46,12 +46,12 @@ void MeasureDistance() {
Log.trace(F("Creating HCSR04 buffer" CR));
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& HCSR04data = jsonBuffer.createObject();
digitalWrite(HCSR04_TRI_PIN, LOW);
digitalWrite(HCSR04_TRI_GPIO, LOW);
delayMicroseconds(2);
digitalWrite(HCSR04_TRI_PIN, HIGH);
digitalWrite(HCSR04_TRI_GPIO, HIGH);
delayMicroseconds(10);
digitalWrite(HCSR04_TRI_PIN, LOW);
unsigned long duration = pulseIn(HCSR04_ECH_PIN, HIGH);
digitalWrite(HCSR04_TRI_GPIO, LOW);
unsigned long duration = pulseIn(HCSR04_ECH_GPIO, HIGH);
if (isnan(duration)) {
Log.error(F("Failed to read from HC SR04 sensor!" CR));
} else {
main/ZsensorHCSR501.ino
+3 -3
View File
@@ -31,8 +31,8 @@
#ifdef ZsensorHCSR501
void setupHCSR501() {
Log.notice(F("HCSR501 pin: %d" CR), HCSR501_PIN);
pinMode(HCSR501_PIN, INPUT); // declare HC SR-501 pin as input
Log.notice(F("HCSR501 pin: %d" CR), HCSR501_GPIO);
pinMode(HCSR501_GPIO, INPUT); // declare HC SR-501 GPIO as input
}
void MeasureHCSR501() {
@@ -41,7 +41,7 @@ void MeasureHCSR501() {
StaticJsonBuffer<JSON_MSG_CALC_BUFFER> jsonBuffer;
JsonObject& HCSR501data = jsonBuffer.createObject();
static int pirState = LOW;
int PresenceValue = digitalRead(HCSR501_PIN);
int PresenceValue = digitalRead(HCSR501_GPIO);
# if defined(ESP8266) || defined(ESP32)
yield();
# endif
main/config_2G.h
+10 -10
View File
@@ -42,19 +42,19 @@ extern void MQTTto2G(char* topicOri, JsonObject& SMSdata);
#define _2G_MAX_SIGNAL 1000
/*-------------------PIN DEFINITIONS----------------------*/
#if !defined(_2G_TX_PIN) || !defined(_2G_RX_PIN) || !defined(_2G_PWR_PIN)
#if !defined(_2G_TX_GPIO) || !defined(_2G_RX_GPIO) || !defined(_2G_PWR_GPIO)
# ifdef ESP8266
# define _2G_TX_PIN D6 //D6 to A6 RX,
# define _2G_RX_PIN D7 //D7 to A6 TX
# define _2G_PWR_PIN D5 // connect a MOSFET to power on and off your A6/7 module
# define _2G_TX_GPIO D6 //D6 to A6 RX,
# define _2G_RX_GPIO D7 //D7 to A6 TX
# define _2G_PWR_GPIO D5 // connect a MOSFET to power on and off your A6/7 module
# elif defined(ESP32)
# define _2G_TX_PIN 16 //D16 to A6 RX,
# define _2G_RX_PIN 17 //D17 to A6 TX
# define _2G_PWR_PIN 5 // connect a MOSFET to power on and off your A6/7 module
# define _2G_TX_GPIO 16 //D16 to A6 RX,
# define _2G_RX_GPIO 17 //D17 to A6 TX
# define _2G_PWR_GPIO 5 // connect a MOSFET to power on and off your A6/7 module
# else
# define _2G_TX_PIN 6 //D6 to A6 RX,
# define _2G_RX_PIN 7 //D7 to A6 TX
# define _2G_PWR_PIN 5 // connect a MOSFET to power on and off your A6/7 module
# define _2G_TX_GPIO 6 //D6 to A6 RX,
# define _2G_RX_GPIO 7 //D7 to A6 TX
# define _2G_PWR_GPIO 5 // connect a MOSFET to power on and off your A6/7 module
# endif
#endif
main/config_ADC.h
+2 -2
View File
@@ -41,8 +41,8 @@ extern void ADCtoMQTT();
#endif
/*-------------------PIN DEFINITIONS----------------------*/
#if defined(ESP8266) || !defined(ADC_PIN)
# define ADC_PIN A0 //on nodeMCU this is D3 GPIO0
#if defined(ESP8266) || !defined(ADC_GPIO)
# define ADC_GPIO A0 //on nodeMCU this is D3 pin
#endif
#endif
main/config_DHT.h
+4 -4
View File
@@ -38,13 +38,13 @@ extern void DHTtoMQTT();
//#define DHT_SENSOR_TYPE DHT21 //uncomment for DHT21 Sensor
#define DHT_SENSOR_TYPE DHT22 //uncomment for DHT22 Sensor (default for backwards compatibility)
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef DHT_RECEIVER_PIN
#ifndef DHT_RECEIVER_GPIO
# if defined(ESP8266)
# define DHT_RECEIVER_PIN 5 //5 = D1 you can put 14 = D5 if you don't use HCSR501 sensor and the RFM69
# define DHT_RECEIVER_GPIO 5 //5 = D1 you can put 14 = D5 if you don't use HCSR501 sensor and the RFM69
# elif defined(ESP32)
# define DHT_RECEIVER_PIN 16
# define DHT_RECEIVER_GPIO 16
# else
# define DHT_RECEIVER_PIN 8
# define DHT_RECEIVER_GPIO 8
# endif
#endif
main/config_DS1820.h
+4 -4
View File
@@ -43,13 +43,13 @@ extern void pubOneWire_HADiscovery();
#define DS1820_CONV_TIME 2000 // trigger conversion before requesting temperature readings (ms)
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef DS1820_OWBUS_PIN
#ifndef DS1820_OWBUS_GPIO
# if defined(ESP8266)
# define DS1820_OWBUS_PIN 2
# define DS1820_OWBUS_GPIO 2
# elif defined(ESP32)
# define DS1820_OWBUS_PIN 2
# define DS1820_OWBUS_GPIO 2
# else
# define DS1820_OWBUS_PIN 2
# define DS1820_OWBUS_GPIO 2
# endif
#endif
main/config_FASTLED.h
+19 -19
View File
@@ -56,31 +56,31 @@
//#define FASTLED_TYPE APA102, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE DOTSTAR, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE WS2801, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE SM16716, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE LPD8806, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE P9813, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE APA102, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
//#define FASTLED_TYPE DOTSTAR, DATA_GPIO, CLOCK_GPIO, RGB>(leds, NUM_LEDS);
// For led chips like Neopixels, which have a data line, ground, and power, you just
// need to define DATA_PIN. For led chipsets that are SPI based (four wires - data, clock,
// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
//#define DATA_PIN 3
//#define CLOCK_PIN 13
// need to define DATA_GPIO. For led chipsets that are SPI based (four wires - data, clock,
// ground, and power), like the LPD8806 define both DATA_GPIO and CLOCK_GPIO
//#define DATA_GPIO 3
//#define CLOCK_GPIO 13
#ifdef ESP8266
//#define FASTLED_ESP8266_RAW_PIN_ORDER
//#define FASTLED_ESP8266_NODEMCU_PIN_ORDER
# define FASTLED_ESP8266_D1_PIN_ORDER
# define FASTLED_DATA_PIN D2 // only D2 works by me
//#define FASTLED_CLOCK_PIN 13
//#define FASTLED_ESP8266_RAW_GPIO_ORDER
//#define FASTLED_ESP8266_NODEMCU_GPIO_ORDER
# define FASTLED_ESP8266_D1_GPIO_ORDER
# define FASTLED_DATA_GPIO D2 // only D2 works by me
//#define FASTLED_CLOCK_GPIO 13
#elif ESP32
# define FASTLED_DATA_PIN 16
# define FASTLED_CLOCK_PIN 13
# define FASTLED_DATA_GPIO 16
# define FASTLED_CLOCK_GPIO 13
#else
# define FASTLED_DATA_PIN 10
# define FASTLED_CLOCK_PIN 13
# define FASTLED_DATA_GPIO 10
# define FASTLED_CLOCK_GPIO 13
#endif
#endif
main/config_GPIOInput.h
+3 -3
View File
@@ -34,11 +34,11 @@ extern void GPIOInputtoMQTT();
#define GPIOInputDebounceDelay 60 //debounce time, increase if there are issues
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef GPIOInput_PIN
#ifndef INPUT_GPIO
# if defined(ESP8266) || defined(ESP32)
# define GPIOInput_PIN 13
# define INPUT_GPIO 13
# else
# define GPIOInput_PIN 7
# define INPUT_GPIO 7
# endif
#endif
main/config_GPIOKeyCode.h
+10 -10
View File
@@ -37,20 +37,20 @@ extern void GPIOKeyCodetoMQTT();
/*-------------------PIN DEFINITIONS----------------------*/
#if defined(ESP8266) || defined(ESP32)
# ifndef GPIOKeyCode_LATCH_PIN
# define GPIOKeyCode_LATCH_PIN 12 //D6
# ifndef GPIOKeyCode_LATCH_GPIO
# define GPIOKeyCode_LATCH_GPIO 12 //D6
# endif
# ifndef GPIOKeyCode_D0_PIN
# define GPIOKeyCode_D0_PIN 14 //D5
# ifndef GPIOKeyCode_D0_GPIO
# define GPIOKeyCode_D0_GPIO 14 //D5
# endif
# ifndef GPIOKeyCode_D1_PIN
# define GPIOKeyCode_D1_PIN 5 //D1
# ifndef GPIOKeyCode_D1_GPIO
# define GPIOKeyCode_D1_GPIO 5 //D1
# endif
# ifndef GPIOKeyCode_D2_PIN
# define GPIOKeyCode_D2_PIN 13 //D7
# ifndef GPIOKeyCode_D2_GPIO
# define GPIOKeyCode_D2_GPIO 13 //D7
# endif
# ifndef GPIOKeyCode_D3_PIN
# define GPIOKeyCode_D3_PIN XX //??
# ifndef GPIOKeyCode_D3_GPIO
# define GPIOKeyCode_D3_GPIO XX //??
# endif
#else
// must define !!!
main/config_HCSR04.h
+6 -6
View File
@@ -49,14 +49,14 @@ extern void MeasureDistance();
/*-------------------PIN DEFINITIONS----------------------*/
#if defined(ESP8266)
# define HCSR04_TRI_PIN D6
# define HCSR04_ECH_PIN D7
# define HCSR04_TRI_GPIO D6
# define HCSR04_ECH_GPIO D7
#elif defined(ESP32)
# define HCSR04_TRI_PIN 16 // NOT TESTED
# define HCSR04_ECH_PIN 17 // NOT TESTED
# define HCSR04_TRI_GPIO 16 // NOT TESTED
# define HCSR04_ECH_GPIO 17 // NOT TESTED
#else
# define HCSR04_TRI_PIN 6 // NOT TESTED
# define HCSR04_ECH_PIN 5 // NOT TESTED
# define HCSR04_TRI_GPIO 6 // NOT TESTED
# define HCSR04_ECH_GPIO 5 // NOT TESTED
#endif
#endif
main/config_HCSR501.h
+4 -4
View File
@@ -37,13 +37,13 @@ extern void HCSR501toMQTT();
#endif
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef HCSR501_PIN
#ifndef HCSR501_GPIO
# if defined(ESP8266)
# define HCSR501_PIN D5
# define HCSR501_GPIO D5
# elif defined(ESP32)
# define HCSR501_PIN 5
# define HCSR501_GPIO 5
# else
# define HCSR501_PIN 7
# define HCSR501_GPIO 7
# endif
#endif
main/config_IR.h
+10 -10
View File
@@ -145,27 +145,27 @@ extern void MQTTtoIR(char* topicOri, JsonObject& RFdata);
#endif
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef IR_RECEIVER_PIN
#ifndef IR_RECEIVER_GPIO
# ifdef ESP8266
# define IR_RECEIVER_PIN 2 //D4 /replace by 4 with sonoff rf bridge
# define IR_RECEIVER_GPIO 2 //D4 /replace by 4 with sonoff rf bridge
# elif ESP32
# define IR_RECEIVER_PIN 26
# define IR_RECEIVER_GPIO 26
# elif __AVR_ATmega2560__
# define IR_RECEIVER_PIN 2 // 2 = D2 on arduino mega
# define IR_RECEIVER_GPIO 2 // 2 = D2 on arduino mega
# else
# define IR_RECEIVER_PIN 0 // 0 = D2 on arduino UNO
# define IR_RECEIVER_GPIO 0 // 0 = D2 on arduino UNO
# endif
#endif
#ifndef IR_EMITTER_PIN
#ifndef IR_EMITTER_GPIO
# ifdef ESP8266
# define IR_EMITTER_PIN 16 //D0/ replace by 0 (D3) if you use IR LOLIN controller shield /replace by 5 with sonoff rf bridge
# define IR_EMITTER_GPIO 16 //D0/ replace by 0 (D3) if you use IR LOLIN controller shield /replace by 5 with sonoff rf bridge
# elif ESP32
# define IR_EMITTER_PIN 14
# define IR_EMITTER_GPIO 14
# elif __AVR_ATmega2560__
# define IR_EMITTER_PIN 9
# define IR_EMITTER_GPIO 9
# else
# define IR_EMITTER_PIN 9
# define IR_EMITTER_GPIO 9
# endif
#endif
main/config_ONOFF.h
+4 -4
View File
@@ -39,13 +39,13 @@ extern void MQTTtoONOFF(char* topicOri, JsonObject& RFdata);
/*-------------------PIN DEFINITIONS----------------------*/
// default pin, if not set into the MQTT json
#ifndef ACTUATOR_ONOFF_PIN
#ifndef ACTUATOR_ONOFF_GPIO
# ifdef ESP8266
# define ACTUATOR_ONOFF_PIN 15 //12 for sonoff basic relay
# define ACTUATOR_ONOFF_GPIO 15 //12 for sonoff basic relay
# elif ESP32
# define ACTUATOR_ONOFF_PIN 15
# define ACTUATOR_ONOFF_GPIO 15
# else
# define ACTUATOR_ONOFF_PIN 13
# define ACTUATOR_ONOFF_GPIO 13
# endif
#endif
main/config_RF.h
+10 -10
View File
@@ -85,29 +85,29 @@ extern void MQTTtoPilight(char* topicOri, JsonObject& RFdata);
#define CC1101_FREQUENCY 433.92
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef RF_RECEIVER_PIN
#ifndef RF_RECEIVER_GPIO
# ifdef ESP8266
# define RF_RECEIVER_PIN 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# define RF_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# elif ESP32
# define RF_RECEIVER_PIN 27 // D27 on DOIT ESP32
# define RF_RECEIVER_GPIO 27 // D27 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_RECEIVER_PIN 1 //1 = D3 on mega
# define RF_RECEIVER_GPIO 1 //1 = D3 on mega
# else
# define RF_RECEIVER_PIN 1 //1 = D3 on arduino
# define RF_RECEIVER_GPIO 1 //1 = D3 on arduino
# endif
#endif
#ifndef RF_EMITTER_PIN
#ifndef RF_EMITTER_GPIO
# ifdef ESP8266
# define RF_EMITTER_PIN 3 // RX on nodemcu if it doesn't work with 3, try with 4 (D2) // put 5 with rf bridge direct mod
# define RF_EMITTER_GPIO 3 // RX on nodemcu if it doesn't work with 3, try with 4 (D2) // put 5 with rf bridge direct mod
# elif ESP32
# define RF_EMITTER_PIN 12 // D12 on DOIT ESP32
# define RF_EMITTER_GPIO 12 // D12 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_EMITTER_PIN 4
# define RF_EMITTER_GPIO 4
# else
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/boarddefs.h so as to free pin D3 for RF RECEIVER PIN
//RF PIN definition
# define RF_EMITTER_PIN 4 //4 = D4 on arduino
# define RF_EMITTER_GPIO 4 //4 = D4 on arduino
# endif
#endif
main/config_WeatherStation.h
+5 -5
View File
@@ -36,15 +36,15 @@ extern void ZgatewayWeatherStationtoMQTT();
#define subjectRFtoMQTT "/433toMQTT"
/*-------------------PIN DEFINITIONS----------------------*/
#ifndef RF_WS_RECEIVER_PIN
#ifndef RF_WS_RECEIVER_GPIO
# ifdef ESP8266
# define RF_WS_RECEIVER_PIN 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# define RF_WS_RECEIVER_GPIO 0 // D3 on nodemcu // put 4 with rf bridge direct mod
# elif ESP32
# define RF_WS_RECEIVER_PIN 27 // D27 on DOIT ESP32
# define RF_WS_RECEIVER_GPIO 27 // D27 on DOIT ESP32
# elif __AVR_ATmega2560__
# define RF_WS_RECEIVER_PIN 1 //1 = D3 on mega
# define RF_WS_RECEIVER_GPIO 1 //1 = D3 on mega
# else
# define RF_WS_RECEIVER_PIN 1 //1 = D3 on arduino
# define RF_WS_RECEIVER_GPIO 1 //1 = D3 on arduino
# endif
#endif
main/main.ino
+5 -5
View File
@@ -467,7 +467,7 @@ void setup() {
#if defined(ESP8266) || defined(ESP32)
# ifdef ESP8266
# ifndef ZgatewaySRFB // if we are not in sonoff rf bridge case we apply the ESP8266 pin optimization
# ifndef ZgatewaySRFB // if we are not in sonoff rf bridge case we apply the ESP8266 GPIO optimization
Serial.end();
Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY); // enable on ESP8266 to free some pin
# endif
@@ -777,14 +777,14 @@ void saveConfigCallback() {
void checkButton() { // code from tzapu/wifimanager examples
// check for button press
if (digitalRead(TRIGGER_PIN) == LOW) {
if (digitalRead(TRIGGER_GPIO) == LOW) {
// poor mans debounce/press-hold, code not ideal for production
delay(50);
if (digitalRead(TRIGGER_PIN) == LOW) {
if (digitalRead(TRIGGER_GPIO) == LOW) {
Log.trace(F("Trigger button Pressed" CR));
// still holding button for 3000 ms, reset settings, code not ideaa for production
delay(3000); // reset delay hold
if (digitalRead(TRIGGER_PIN) == LOW) {
if (digitalRead(TRIGGER_GPIO) == LOW) {
Log.trace(F("Button Held" CR));
Log.notice(F("Erasing ESP Config, restarting" CR));
setup_wifimanager(true);
@@ -812,7 +812,7 @@ void eraseAndRestart() {
}
void setup_wifimanager(bool reset_settings) {
pinMode(TRIGGER_PIN, INPUT_PULLUP);
pinMode(TRIGGER_GPIO, INPUT_PULLUP);
delay(10);
WiFi.mode(WIFI_STA);
platformio.ini
+14 -14
View File
@@ -294,8 +294,8 @@ build_flags =
'-DZgatewayIR="IR"'
'-DLOW_POWER_LED=19'
'-DLOW_POWER_LED_OFF=0'
'-DTRIGGER_PIN=35'
'-DIR_EMITTER_PIN=17'
'-DTRIGGER_GPIO=35'
'-DIR_EMITTER_GPIO=17'
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_BLE_IR"'
board_upload.speed = 921600
@@ -313,9 +313,9 @@ build_flags =
'-DZsensorGPIOInput="GPIOInput"'
'-DZboardM5STACK="M5Stack"'
'-DLOW_POWER_LED=15'
'-DTRIGGER_PIN=37'
'-DTRIGGER_GPIO=37'
'-DSLEEP_BUTTON=38'
'-DGPIOInput_PIN=39'
'-DINPUT_GPIO=39'
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STACK_BLE"'
board_upload.speed = 921600
@@ -334,13 +334,13 @@ build_flags =
'-DZgatewayIR="IR"'
'-DZsensorGPIOInput="GPIOInput"'
'-DZboardM5STICKC="M5StickC"'
'-DACTUATOR_ONOFF_PIN=10'
'-DGPIOInput_PIN=37'
'-DACTUATOR_ONOFF_GPIO=10'
'-DINPUT_GPIO=37'
'-DLOW_POWER_LED=10'
'-DLOW_POWER_LED_OFF=1'
'-DSLEEP_BUTTON=39'
'-DTRIGGER_PIN=39'
'-DIR_EMITTER_PIN=9'
'-DTRIGGER_GPIO=39'
'-DIR_EMITTER_GPIO=9'
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_C_BLE_IR"'
board_upload.speed = 1500000
@@ -497,7 +497,7 @@ build_flags =
${com-esp.build_flags}
'-DZgatewayRF="RF"'
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF_WIFI_GW"'
'-DRF_RECEIVER_PIN=5'
'-DRF_RECEIVER_GPIO=5'
board_build.flash_mode = dout
[env:nodemcuv2-rf2]
@@ -564,8 +564,8 @@ build_flags =
${com-esp.build_flags}
'-DZactuatorONOFF="ONOFF"'
'-DZsensorGPIOInput="GPIOInput"'
'-DACTUATOR_ONOFF_PIN=12'
'-DGPIOInput_PIN=0'
'-DACTUATOR_ONOFF_GPIO=12'
'-DINPUT_GPIO=0'
'-DGateway_Name="OpenMQTTGateway_SONOFF_RELAY"'
board_build.flash_mode = dout
@@ -580,9 +580,9 @@ build_flags =
${com-esp.build_flags}
'-DZactuatorONOFF="ONOFF"'
'-DZsensorGPIOInput="GPIOInput"'
'-DACTUATOR_ONOFF_PIN=12'
'-DGPIOInput_PIN=0'
'-DRF_RECEIVER_PIN=4'
'-DACTUATOR_ONOFF_GPIO=12'
'-DINPUT_GPIO=0'
'-DRF_RECEIVER_GPIO=4'
'-DZgatewayRF="RF"'
'-DGateway_Name="OpenMQTTGateway_SONOFF_BASIC_RFR3"'
board_build.flash_mode = dout
test/Test_config.h
+3 -3
View File
@@ -134,11 +134,11 @@ char gateway_name[parameters_size * 2] = Gateway_Name;
// VCC ------------D|-----------/\/\/\/\ ----------------- Arduino PIN
// LED Resistor 270-510R
#ifndef TRIGGER_PIN
#ifndef TRIGGER_GPIO
# ifdef ESP8266
# define TRIGGER_PIN 14 // pin D5 as full reset button (long press >10s)
# define TRIGGER_GPIO 14 // pin D5 as full reset button (long press >10s)
# elif ESP32
# define TRIGGER_PIN 0 // boot button as full reset button (long press >10s)
# define TRIGGER_GPIO 0 // boot button as full reset button (long press >10s)
# endif
#endif