* Add automatic stop of relay following ESP32 temperature
To avoid overheating when too much current goes through the device.
Add internal temperature reporting to SYStoMQTT
This function is not available with ESP32 S3 and C3
* Temp update and error log
Update of the temperature to get closer to the datasheet of the ESP32 -40 +85C
and add the module name to the error log
This also changes the topic structure when using the macro valueAsATopic=true, it adds as sub-topics the `type, subtype, and channel` when they exist.
The id is the last subtopic to facilitate filtering, as it may change when replacing the batteries.
Co-authored-by: NorthernMan54 <19808920+NorthernMan54@users.noreply.github.com>
* Update to rtl_433_ESP 0.1.5
Includes support for LILYGO® LoRa32 V2.1_1.6.1 433 Mhz
* Fix lint issue
* Fix build and lint issues
* Add lilygo-rtl_433 to build.yml
* added thingspulse gateways
* added thingspulse gateways, RGB LED for tinypico
* Added some LED and Birghtness options
* Requested Changes
* fixed format
This macro is not necessary to add per environment as it is present into com-esp as a global macro for all ESP, also modifying nodemcuv2-mqtt-fw-test env to test self signed only. Removing env:esp32dev-mqtt-fw-test as self signed cert are already tested into env:esp32dev-ble-aws.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
so as to don't disclose the password used for WM.
Also change the wm password from MAc to be the last 8 digits, as these will change more than the first 8 ones.
Also make consistent the ifndef qnd the parsing between WM_PWD_FROM_MAC and USE_MAC_AS_GATEWAY_NAME
* First draft of LM75 sensor based on HTU21 sensor
* Initialise I2C on ESP8266
* Add LM75 sensor to test builds
So that it will be tested with the continuous integration
* Add RGB Led management for errors, infos, and send receive events
Add RGB led management for indicators, integrate it for M5 Atom and ESP32 C3 and S3 dev board
Update Fastled version to 3.5.0.
The default behavior is with regular LED, to use RGB Led the macro RGB_INDICATORS needs to be define, along with the FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO and FASTLED_IND_NUM_LEDS
Note that some RGB led need to have a different color scheme, so in this case it can be entered along with the data PIN definition: -DFASTLED_IND_DATA_GPIO=27,GRB
* Add FastLed library to the environments
* Update Arduino core and BLE/WiFiManager libs.
* Add esp32-s3 and esp32-c3 environments.
* Update build script to use matrix.
* Update release build.
* Fix WiFiManager crash
* Use espressif32 version 3.5.0 for standard ESP32.
* Resolves BLE scan_evt timeout issue with latest version (5.2.0).
* ESP32C3 and ESP32S3 Env's use espressif32 version 5.2.0.
* Update LED pins for C3/S3 environments.
* Bump Theengs Decoder to v095
* IBT-4XC inclusion by @DigiH in #208
* ThermoPro TP359 by @DigiH in #210
* IBS-TH1 external probe differentiation by @DigiH in #211
* CGG1 firmware extension by @DigiH in #218
* Otio/BeeWi BSDOO by @DigiH in #214
The main features of the upgrade to 0.1.3 of rtl_433_ESP are
1 - Change Transceiver Library to RadioLib
2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).
3 - Added automatic calibration of the RSSI Signal detection Threshold
4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task
5 - Moved received signal decoding to a ESP32 Task
6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.
7 - Multi Receiver support has been validated with RF, RF2 and PiLight
* Move minRssi in config_BT.h
Move var definitions next to compilation var definitions
* Introduce UseExtDecoder when is def MQTTDecodeTopic
Replace #ifdef MQTTDecodeTopic by #if UseExtDecoder
* Rename AttemptBLECOnnect to AttemptBLEConnect
* Create a struct (BTConfig_s) for BT configuration data
Create a default config for BTConfig_s (BTConfig_default) based on defines
Create a global variable (BTConfig) to hold live BT configuration data and initialize it
Move bleConnect to BTConfig
* Move BLEscanBeforeConnect in BTConfig
* Move BLEinterval in BTConfig
* Move PublishOnlySensors in BTConfig
* Move hassPresence in BTConfig
* Move minRssi into BTConfig
* Introduce presenceTopic into BTConfig
* Move MQTTDecodeTopic as extDecoderTopic into BTConfig
* Mutate UseExtDecoder as runtime var BTConfig.extDecoderTopic
* Remove ServicedataMinLength (unused)
Always declare AttemptBLEConnect & BLE_FILTER_CONNECTABLE
* Mutate BLE_FILTER_CONNECTABLE as runtime parameter BTConfig.filterConnectable
* Mutate pubKnownBLEServiceData as runtime var in BTConfig
Mutate pubUnknownBLEServiceData as runtime var in BTConfig
Mutate pubBLEManufacturerData as runtime var in BTConfig
Mutate pubUnknownBLEManufacturerData as runtime var in BTConfig
Mutate pubBLEServiceUUID as runtime var in BTConfig
* Mutate useBeaconUuidForTopic as runtime var in BTConfig
Mutate useBeaconUuidForPresence as runtime var in BTConfig
* Small optimization
* Formatting of config_BT
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Add OpenHAB3 tutorial and BLE binary
* Small text changes
Just a few small text changes, also writing out OMG as OpenMQTTGateway, probably clearer for new to OMG users.
Co-authored-by: DigiH <github@digih.net>
* Bump Theengs Decoder to v0.6.1
* Differentiate a FASTLed environment
* remove BT from the nodemcuv2-all-test env as it is already tested into nodemcuv2-ble
* Decoder 0.6.2
Co-authored-by: DigiH <github@digih.net>
* Publishing/receiving inconsistencies
* General platformio.ini changes
General platformio.ini changes to allow for publishing/receiving settings to be defined in User_cofig.h instead of them only working if defined in the environments. Kept separate so far for discussion.
* Use a task to process immediate BLE actions to prevent MQTT disconnection if the action takes too long to complete.
* Add state_on and state_off parameters to createDiscovery
New IBT-2X version
XMTZX04HM extension
XMTZX05HM extension
Add temperature decoding to JQJCY01M
Fix IBT 6XS
Replace lbs by lb
Add SOLIS 6 Probes BBQ
Add temp to JQJCY01M
Update XMTZC05HM to include XMTZC02HM
Just some minor code cleanup
* Rework OOK Receiver sample and rename directory to OOK_Receiver
* Cleaned up diagnostic logging
* Added logging of device decoder return codes ( DEMOD_DEBUG & RTL_DEBUG=4 )
* Fixed some compiler warnings
* Remove std::string as the model id and use decoder enum.
* Update decoder version
* Check model id is in decoder range when launching discovery.
* Add BLEconnect enum MIN/MAX
Florian