Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

The main features of the upgrade to 0.1.3 of rtl_433_ESP are

1 - Change Transceiver Library to RadioLib

2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).

3 - Added automatic calibration of the RSSI Signal detection Threshold

4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task

5 - Moved received signal decoding to a ESP32 Task

6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.

7 - Multi Receiver support has been validated with RF, RF2 and PiLight

platformio.ini

@@ -133,7 +133,7 @@ smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.5.7
 stl = https://github.com/mike-matera/ArduinoSTL.git#7411816
 shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library
 somfy_remote=Somfy_Remote_Lib@0.3.0
-rtl_433_ESP = https://github.com/NorthernMan54/rtl_433_ESP.git#v0.0.4
+rtl_433_ESP = https://github.com/NorthernMan54/rtl_433_ESP.git#v0.1.3
 emodbus =  miq19/eModbus@1.0.0
 gfSunInverter = https://github.com/BlackSmith/GFSunInverter.git#v1.0.1
 decoder = https://github.com/theengs/decoder.git#v0.9.0
@@ -757,12 +757,57 @@ lib_deps =
   ${libraries.rtl_433_ESP}
 build_flags =
   ${com-esp.build_flags}
-  '-DZradioCC1101="CC1101"'
-  '-DZgatewayRTL_433="rtl_433"'
-  '-DGateway_Name="OpenMQTTGateway_rtl_433_ESP"'
+; *** OpenMQTTGateway Config ***
+  '-UZmqttDiscovery'          ; disables MQTT Discovery
   '-DvalueAsATopic=true'    ; MQTT topic includes model and device
-;  '-DPUBLISH_UNPARSED=true'  ; Publish details of undecoded signals
-;  '-DRTL_DEBUG=4'            ; enable rtl_433 verbose device decode
+  '-DLOG_LEVEL=LOG_LEVEL_TRACE'
+  '-DGateway_Name="OpenMQTTGateway_rtl_433_ESP"'
+; *** OpenMQTTGateway Modules ***
+  '-DZgatewayRTL_433="rtl_433"'
+  '-DZradioCC1101="CC1101"'
+; *** rtl_433_ESP Options ***
+;  '-DRTL_DEBUG=4'           ; rtl_433 verbose mode
+;  '-DRTL_VERBOSE=58'          ; LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W, TX145wsdth sensor
+;  '-DRAW_SIGNAL_DEBUG=true'   ; display raw received messages
+;  '-DMEMORY_DEBUG=true'   ; display memory usage information
+  '-DDEMOD_DEBUG=true'  ; display signal debug info
+;  '-DMY_DEVICES=true'             ; subset of devices
+  '-DPUBLISH_UNPARSED=true'   ; publish unparsed signal details
+;  '-DRSSI_THRESHOLD=12'         ; Apply a delta of 12 to average RSSI level
+;  '-DAVERAGE_RSSI=5000'     ; Display RSSI floor ( Average of 5000 samples )
+  '-DSIGNAL_RSSI=true'             ; Display during signal receive
+  '-DNO_DEAF_WORKAROUND=true'
+; *** RF Module Options ***
+  '-DRF_CC1101="CC1101"'  ; CC1101 Transceiver Module
+;  '-DRF_MODULE_CS=5'      ; pin to be used as chip select
+  '-DRF_MODULE_GDO0=12'   ; CC1101 pin GDO0
+  '-DRF_MODULE_GDO2=27'   ; CC1101 pin GDO2
+; *** RadioLib Options ***
+;  '-DRADIOLIB_DEBUG=true'
+;  '-DRADIOLIB_VERBOSE=true'
+
+[env:heltec-rtl_433]
+platform = ${com.esp32_platform}
+board = heltec_wifi_lora_32_V2
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.wifimanager32}
+  ${libraries.ssd1306}
+  ${libraries.rtl_433_ESP}
+build_flags =
+  ${com-esp.build_flags}
+; *** OpenMQTTGateway Config ***
+  '-UZmqttDiscovery'          ; disables MQTT Discovery
+  '-DvalueAsATopic=true'    ; MQTT topic includes model and device
+  '-DGateway_Name="OpenMQTTGateway_heltec_rtl_433_ESP"'
+; *** OpenMQTTGateway Modules ***
+  '-DZgatewayRTL_433="rtl_433"'
+  '-DZboardHELTEC="HELTEC"'
+  '-DZradioSX127x="SX127x"'
+; *** ssd1306 Module Options ***
+  ; '-DLOG_TO_LCD=true'         ; Enable log to LCD
+  ; '-DLOG_LEVEL_LCD=LOG_LEVEL_TRACE'    // default is notice log level
 
 [env:esp32dev-multi_receiver]
 platform = ${com.esp32_platform}
@@ -786,6 +831,12 @@ build_flags =
   '-DGateway_Name="OpenMQTTGateway_multi_receiver"'
   '-DvalueAsATopic=true'  ; MQTT topic includes model and device (rtl_433) or protocol and id (RF and PiLight)
 ;  '-DDEFAULT_RECEIVER=1'  ; Default receiver to enable on startup
+; *** RF Module Options ***
+  '-DRF_CC1101="CC1101"'  ; CC1101 Transceiver Module
+  '-DRF_MODULE_CS=5'      ; pin to be used as chip select
+  '-DRF_MODULE_GDO0=12'   ; CC1101 pin GDO0
+  '-DRF_MODULE_GDO2=27'   ; CC1101 pin GDO2
+;  '-DRF_MODULE_INIT_STATUS=true'    ; Display transceiver config during startup
 
 [env:tinypico-ble]
 platform = ${com.esp32_platform}