Add SHELLY PLUS 1 board with support of relay, switch, BT gateway (#1349)

So that you know, the overtemperature protection is not implemented in the firmware.

platformio.ini

@@ -61,6 +61,7 @@ extra_configs =
 ;default_envs = tinypico-ble
 ;default_envs = ttgo-lora32-v1-868
 ;default_envs = ttgo-lora32-v1-915
+;default_envs = shelly-plus1
 ;default_envs = ttgo-t-beam
 ;default_envs = heltec-wifi-lora-32-868
 ;default_envs = heltec-wifi-lora-32-915
@@ -159,6 +160,7 @@ monitor_speed = 115200
 esp8266_platform = espressif8266@3.2.0
 esp32_platform = espressif32@3.5.0
 esp32_c3_s3_platform = espressif32@5.2.0
+esp32_solo_platform = https://github.com/tasmota/platform-espressif32/releases/download/v.2.0.5/platform-espressif32-v.2.0.5.zip
 atmelavr_platform = atmelavr@3.3.0
 
 [com-esp]
@@ -1020,6 +1022,37 @@ build_flags =
   '-DTimeLedON=0.1'
   '-DLED_SEND_RECEIVE_ON=1'
 
+[env:shelly-plus1]
+platform = ${com.esp32_solo_platform}
+board = esp32-solo1
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.ble}
+  ${libraries.wifimanager32}
+  ${libraries.decoder}
+build_flags = 
+  ${env.build_flags}
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DTimeBtwRead=100'
+  '-DScan_duration=3000'
+  '-DTRIGGER_GPIO=25'
+  '-DZactuatorONOFF="ONOFF"'
+  '-DACTUATOR_ON=1'
+  '-DACTUATOR_OFF=0'
+  '-ACTUATOR_TRIGGER=true'
+  '-DZsensorGPIOInput="GPIOInput"'
+  '-DINPUT_GPIO=4'
+  '-DGPIO_INPUT_TYPE=INPUT'
+  '-DACTUATOR_ONOFF_GPIO=26'
+  '-DZsensorADC="ADC"'
+  '-DADC_GPIO=32'
+  '-DUSE_MAC_AS_GATEWAY_NAME'
+  '-DFRAMEWORK_ARDUINO_SOLO1'
+  '-DGATEWAY_MANUFACTURER="Shelly"'
+  '-DGATEWAY_MODEL="SPLUS1"'
+
 [env:nodemcuv2-all-test]
 platform = ${com.esp8266_platform}
 board = nodemcuv2
@@ -1324,6 +1357,7 @@ build_flags =
   '-DACTUATOR_ON=0'
   '-DACTUATOR_ONOFF_DEFAULT=ACTUATOR_ON'
   '-DACTUATOR_BUTTON_TRIGGER_LEVEL=0'
+  '-ACTUATOR_TRIGGER=true'
   '-DGateway_Name="OpenMQTTGateway_SONOFF_RELAY"'
 board_build.flash_mode = dout
 
@@ -1344,6 +1378,7 @@ build_flags =
   '-DACTUATOR_ON=0'
   '-DACTUATOR_ONOFF_DEFAULT=ACTUATOR_ON'
   '-DACTUATOR_BUTTON_TRIGGER_LEVEL=0'
+  '-ACTUATOR_TRIGGER=true'
   '-DRF_RECEIVER_GPIO=4'
   '-DZgatewayRF="RF"'
   '-DGateway_Name="OpenMQTTGateway_SONOFF_BASIC_RFR3"'