* [BT] Add BM2 voltage
Voltage retrieval through a BLE connection, frequency of the BLE connection is defined by `intervalcnct`
* Add doc
Credits to https://github.com/KrystianD/bm2-battery-monitor
* [OTA] Add automatic OTA updates
This feature will enable to update the gateway with one button or a simple MQTT command.
* [CI] Enable automatic OTA for nightly development builds
And integrate the latest_version file creation into the CI
Enable to specify a particular version
and switch between dev and production builds
To enable boards with the constant power supply to don't build this function.
Change the default behavior for the mode not to be built by default.
Only the boards with batteries are keeping it
Set `interval` and `intervalacts` to the minimum when adaptive scanning is deactivated. When the user encounters a situation on which a device is not detected due to adaptive scanning, we set the gateway to continuous active to maximize the chance to detect the device.
By not deinitializing BLE at the start, if it has not been initialized. Setting the time between waking up from the macro rather than the config interval.
This one does not have a value at the start.
* [BT] Adaptive scan
Add adaptive scan to avoid users setting parameters and deduct automatically the scan requirements from the list of devices
---------
Co-authored-by: DigiH <github@digih.net>
Publish BT config parameter at start so as to update the switch statuses in the controller
Also publish regularly in case of controller restart
Also move btqsum, btqsnd and btqavg to BTtoMQTT topic instead of SYStoMQTT as they are more relevant here
With only one control that enables the publication of all the advertisement data, default: false
Note that if the sensor is not recognized, we will no longer publish its advertisement data unless the control is true. This is for the sake of traffic reduction.
* [DOCS] - Generate board documentation automaticaly from platformio.ini
To reduce maintenance effort
* [CI] Differentiate boards from platformio.ini
So that only one line can be commented to use customs environments
Manual control with a button press triggered the relay but 2 times (when pressing and releasing), fixing this.
Check that we have two consecutive readings of temperature above the threshold to trigger the actuator to OFF
And remove it by default to the shelly, as I see unjustified jumps of temperature above 80C.
The previous macro used SENS_SAR_MEAS_WAIT2_REG to identify if we have the reading capability was not working, so replacing it by a fresh one NO_INT_TEMP_READING, defined as a negation due to the fact that most of the ESP32 supports internal temperature reading.
* Add automatic stop of relay following ESP32 temperature
To avoid overheating when too much current goes through the device.
Add internal temperature reporting to SYStoMQTT
This function is not available with ESP32 S3 and C3
* Temp update and error log
Update of the temperature to get closer to the datasheet of the ESP32 -40 +85C
and add the module name to the error log
This also changes the topic structure when using the macro valueAsATopic=true, it adds as sub-topics the `type, subtype, and channel` when they exist.
The id is the last subtopic to facilitate filtering, as it may change when replacing the batteries.
Co-authored-by: NorthernMan54 <19808920+NorthernMan54@users.noreply.github.com>
I don't think there is usage for such a switch into HA, if you see it, auto discovery was already activated and all the entities created, so you will have to go to the mqtt client to remove the retained messages.
If you don't want auto discovery as an HA user you would have to go to the mqtt client to send the discovery message deactivation.
So either way as a HA user you have to go to a client.
And as people not wanting to use auto discovery with HA are the people that are not using HA this switch as a little value.
The current way of saving settings is through the retain flag of the MQTT commands, unfortunately if several commands are issues they may overwrite each other. So as to prevent it, we now leverage the memory saving introduced earlier to store the BLE settings.
Also leverage the config status publication to show the state through the button position (optimistic false)
This commit add the capability to set passive scanning during runtime, versus buildtime before, so as to improve energy consumption of sensors when they don't require active scanning
This macro is not necessary to add per environment as it is present into com-esp as a global macro for all ESP, also modifying nodemcuv2-mqtt-fw-test env to test self signed only. Removing env:esp32dev-mqtt-fw-test as self signed cert are already tested into env:esp32dev-ble-aws.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Florian