[ONOFF] - Improve Led display (#1430)

Improve Led display when limits are reached

main/User_config.h

@@ -452,9 +452,13 @@ int lowpowermode = DEFAULT_LOW_POWER_MODE;
 #  define SendReceiveIndicatorOFF() digitalWrite(LED_SEND_RECEIVE, !LED_SEND_RECEIVE_ON)
 #  define InfoIndicatorON()         digitalWrite(LED_INFO, LED_INFO_ON)
 #  define InfoIndicatorOFF()        digitalWrite(LED_INFO, !LED_INFO_ON)
+#  define CriticalIndicatorON()     // Not used
 #else // Management of Errors, reception/emission and informations indicators with RGB LED
 #  include <FastLED.h>
 CRGB leds[FASTLED_IND_NUM_LEDS];
+#  ifdef FASTLED_IND_DATA_GPIO2 // Only used for Critical Indicator
+CRGB leds2[FASTLED_IND_NUM_LEDS];
+#  endif
 #  ifndef RGB_LED_POWER
 #    define RGB_LED_POWER -1 // If the RGB Led is linked to GPIO pin for power define it here
 #  endif
@@ -471,12 +475,15 @@ CRGB leds[FASTLED_IND_NUM_LEDS];
 #  ifndef FASTLED_ERROR_LED
 #    define FASTLED_ERROR_LED 0 // First Led
 #  endif
+#  ifndef FASTLED_CRITICAL_LED
+#    define FASTLED_CRITICAL_LED 0 // First Led
+#  endif
 
 #  define SetupIndicators()                                                               \
     pinMode(RGB_LED_POWER, OUTPUT);                                                       \
     digitalWrite(RGB_LED_POWER, HIGH);                                                    \
     FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO>(leds, FASTLED_IND_NUM_LEDS); \
-    FastLED.setBrightness(FASTLED_BRIGHTNESS);
+    FastLED.setBrightness(FASTLED_BRIGHTNESS)
 #  define ErrorIndicatorON()                \
     leds[FASTLED_ERROR_LED] = CRGB::Orange; \
     FastLED.show()
@@ -495,6 +502,15 @@ CRGB leds[FASTLED_IND_NUM_LEDS];
 #  define InfoIndicatorOFF()              \
     leds[FASTLED_INFO_LED] = CRGB::Black; \
     FastLED.show()
+#  ifdef FASTLED_IND_DATA_GPIO2
+// For the critical ON indicator there is no method to turn it off, the only way is to unplug the device
+// This enable to have persistence of the indicator to inform the user
+#    define CriticalIndicatorON()                                                             \
+      FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO2>(leds2, FASTLED_IND_NUM_LEDS); \
+      FastLED.setBrightness(FASTLED_BRIGHTNESS);                                              \
+      leds2[FASTLED_INFO_LED] = CRGB::Red;                                                    \
+      FastLED.show()
+#  endif
 #endif
 
 #ifdef ESP8266

main/ZactuatorONOFF.ino

@@ -119,14 +119,11 @@ void overLimitTemp(void* pvParameters) {
     float internalTempc = intTemperatureRead();
     Log.trace(F("Internal temperature of the ESP32 %F" CR), internalTempc);
     // We switch OFF the actuator if the temperature of the ESP32 is more than MAX_TEMP_ACTUATOR two consecutive times, so as to avoid false single readings to trigger the relay OFF.
-    if (internalTempc > MAX_TEMP_ACTUATOR && previousInternalTempc > MAX_TEMP_ACTUATOR && digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) {
-      Log.error(F("[ActuatorONOFF] OverTemperature detected ( %F > %F ) switching OFF Actuator" CR), internalTempc, MAX_TEMP_ACTUATOR);
-      ActuatorTrigger();
-      for (int i = 0; i < 30; i++) {
-        ErrorIndicatorON();
-        vTaskDelay(200);
-        ErrorIndicatorOFF();
-        vTaskDelay(200);
+    if (internalTempc > MAX_TEMP_ACTUATOR && previousInternalTempc > MAX_TEMP_ACTUATOR) {
+      if (digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) { // This could be with thew previous condition, but it is better to trigger the digitalRead only if the previous condition is met
+        Log.error(F("[ActuatorONOFF] OverTemperature detected ( %F > %F ) switching OFF Actuator" CR), internalTempc, MAX_TEMP_ACTUATOR);
+        ActuatorTrigger();
+        CriticalIndicatorON();
       }
     }
     previousInternalTempc = internalTempc;
@@ -143,14 +140,11 @@ void overLimitCurrent(void* pvParameters) {
     float current = getRN8209current();
     Log.trace(F("RN8209 Current %F" CR), current);
     // We switch OFF the actuator if the current of the RN8209 is more than MAX_CURRENT_ACTUATOR.
-    if (current > MAX_CURRENT_ACTUATOR && digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) {
-      Log.error(F("[ActuatorONOFF] OverCurrent detected ( %F > %F ) switching OFF Actuator" CR), current, MAX_CURRENT_ACTUATOR);
-      ActuatorTrigger();
-      for (int i = 0; i < 30; i++) {
-        ErrorIndicatorON();
-        vTaskDelay(200);
-        ErrorIndicatorOFF();
-        vTaskDelay(200);
+    if (current > MAX_CURRENT_ACTUATOR) {
+      if (digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) { // This could be with thew previous condition, but it is better to trigger the digitalRead only if the previous condition is met
+        Log.error(F("[ActuatorONOFF] OverCurrent detected ( %F > %F ) switching OFF Actuator" CR), current, MAX_CURRENT_ACTUATOR);
+        ActuatorTrigger();
+        CriticalIndicatorON();
       }
     }
     vTaskDelay(TimeBetweenReadingCurrent);

main/config_ONOFF.h

@@ -57,7 +57,7 @@ extern void MQTTtoONOFF(char* topicOri, JsonObject& RFdata);
 #  define TimeBetweenReadingIntTemp 5000 // Time interval between internal temp measurement to switch off the relay if MAX_TEMP_ACTUATOR is reached
 #endif
 #ifndef TimeBetweenReadingCurrent
-#  define TimeBetweenReadingCurrent 1000 // Time interval between internal temp measurement to switch off the relay if MAX_TEMP_ACTUATOR is reached
+#  define TimeBetweenReadingCurrent 1000 // Time interval between internal current measurement to switch off the relay if MAX_TEMP_ACTUATOR is reached
 #endif
 /*-------------------PIN DEFINITIONS----------------------*/
 // default pin, if not set into the MQTT json