* Initial generalization from a PWM LED controller, to a PWM controller.
Allow the config file to set the name of each channel and the number of channels.
Fade time is now per-channel, so MQTT messages can genuinely set an individual channel, and specify the fade time for that channel.
The default gamma is configurable in the config.
-replace low power led by led info
-enable to change the led ON value
-go upper case for the led macros
Also transform BLE connect warning to notice in log
Add Sonoff RF Bridge LED
* Add LYWSD03MMC and MHO-C401 device
and an associated BLE connect mechanism as these devices advertise only encrypted data
-free manufacturer data
-update library
* Implement scans number before connect
-Add the possibility to do a connect every X scan
-Rename variables for consistency
-Some refactoring for improved code reading
* added support for secure TLS connections
on ESP32 and ESP8266 close#101
* added TLS test builds
* added documentation for TLS
fixed some some issues in the documentation
* added documentation for error code=54
* handle 64 bits values, except for UNO
Arduino UNO is not enough powerfull to handle properly uint64_t in terms of memory so differenciate the variable type depending on the board type
With this configuration ATMega will not be able to receive with simpleReceiving 64 bits values. Of course Json will work with 64 bits values for this board.
* Simplify jsondata.success() condition
* Renamings and optimize deduplication functions
* replace 2 dimensions array by a structure so as to handle the time with an uint32_t when using an ESP (instead of a uint64_t)
* change storeValue and isAduplicate function names
* point to the rcswitch revision with the new 40 bits protocol
Co-authored-by: Leon Kiefer <leon.k97@gmx.de>
Change sha commit separation key for PIO
complete the name of htu21 library,
PIO Add github full path to the libraries def
and add rfm69spi library
and add rfm69 low power
* Automatically set mqtt buffer size
Current versions of pubsubclient allows the buffer size to be set
dynamically: https://github.com/knolleary/pubsubclient/pull/282
We can take advantage of this to avoid having to modify one of the
dependencies and instead automatically up the buffer size when a
powerful board is detected.
reduce gateway name
reduce parameters size
correct issue when using advanced config network
comment simple receiving per default (it is set in platformio.ini when necessary)
Add both board to automatic build with:
BLE (both)
Trigger pin for parameters reset (both)
IR for m5stick
Button reading for m5stack
Add also Trigger pin for parameters reset on m5stick-c
* update irremoteesp8266
* add new protocols, simplify API and publish protocol name
-added the following protocols:
#define IR_LEGOPF
#define IR_MITSUBISHI_HEAVY_88
#define IR_MITSUBISHI_HEAVY_152
#define IR_DAIKIN216
#define IR_SHARP_AC
#define IR_GOODWEATHER
#define IR_INAX
#define IR_DAIKIN160
#define IR_NEOCLIMA
#define IR_DAIKIN176
#define IR_DAIKIN128
#define IR_AMCOR
#define IR_DAIKIN152
#define IR_MITSUBISHI136
#define IR_MITSUBISHI112
#define IR_HITACHI_AC424
-changed the send API, now you can use the protocol name directly exemple NEC instead of IR_NEC
-publish the protocol name to MQTT added to the number
-replace long by long long
* missing repeat definitions
and set default repeat value to 0
* move protocol name retrieving outside arduino scope
* put all protocols with capital letters
* modify doc
* add long long activation for arduino json on test_config file
-avoid issues with WIFI automatic reconnection on ESP32
-avoid reset of ESP32 when wifi is disconnected
-enable to erase the wifi/mqtt settings if; the mqtt broker wasn't connected once or if the TRIGGER_PIN is pushed for a long time >10s
Florian