Replace pin by gpio (#631)

* replace _PIN by _GPIO

* add mention about the goal of -all binaries

* [breaking] change json key from "pin" to "gpio" for actuatorONOFF

platformio.ini

@@ -294,8 +294,8 @@ build_flags =
   '-DZgatewayIR="IR"'
   '-DLOW_POWER_LED=19'
   '-DLOW_POWER_LED_OFF=0'
-  '-DTRIGGER_PIN=35'
-  '-DIR_EMITTER_PIN=17'
+  '-DTRIGGER_GPIO=35'
+  '-DIR_EMITTER_GPIO=17'
   '-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_BLE_IR"'
 board_upload.speed = 921600
 
@@ -313,9 +313,9 @@ build_flags =
   '-DZsensorGPIOInput="GPIOInput"'
   '-DZboardM5STACK="M5Stack"'
   '-DLOW_POWER_LED=15'
-  '-DTRIGGER_PIN=37'
+  '-DTRIGGER_GPIO=37'
   '-DSLEEP_BUTTON=38'
-  '-DGPIOInput_PIN=39'
+  '-DINPUT_GPIO=39'
   '-DGateway_Name="OpenMQTTGateway_ESP32_M5STACK_BLE"'
 board_upload.speed = 921600
 
@@ -334,13 +334,13 @@ build_flags =
   '-DZgatewayIR="IR"'
   '-DZsensorGPIOInput="GPIOInput"'
   '-DZboardM5STICKC="M5StickC"'
-  '-DACTUATOR_ONOFF_PIN=10'
-  '-DGPIOInput_PIN=37'
+  '-DACTUATOR_ONOFF_GPIO=10'
+  '-DINPUT_GPIO=37'
   '-DLOW_POWER_LED=10'
   '-DLOW_POWER_LED_OFF=1'
   '-DSLEEP_BUTTON=39'
-  '-DTRIGGER_PIN=39'
-  '-DIR_EMITTER_PIN=9'
+  '-DTRIGGER_GPIO=39'
+  '-DIR_EMITTER_GPIO=9'
   '-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_C_BLE_IR"'
 board_upload.speed = 1500000
 
@@ -497,7 +497,7 @@ build_flags =
   ${com-esp.build_flags}
   '-DZgatewayRF="RF"'
   '-DGateway_Name="OpenMQTTGateway_ESP8266_RF_WIFI_GW"'
-  '-DRF_RECEIVER_PIN=5'
+  '-DRF_RECEIVER_GPIO=5'
 board_build.flash_mode = dout
 
 [env:nodemcuv2-rf2]
@@ -564,8 +564,8 @@ build_flags =
   ${com-esp.build_flags}
   '-DZactuatorONOFF="ONOFF"'
   '-DZsensorGPIOInput="GPIOInput"'
-  '-DACTUATOR_ONOFF_PIN=12'
-  '-DGPIOInput_PIN=0'
+  '-DACTUATOR_ONOFF_GPIO=12'
+  '-DINPUT_GPIO=0'
   '-DGateway_Name="OpenMQTTGateway_SONOFF_RELAY"'
 board_build.flash_mode = dout
 
@@ -580,9 +580,9 @@ build_flags =
   ${com-esp.build_flags}
   '-DZactuatorONOFF="ONOFF"'
   '-DZsensorGPIOInput="GPIOInput"'
-  '-DACTUATOR_ONOFF_PIN=12'
-  '-DGPIOInput_PIN=0'
-  '-DRF_RECEIVER_PIN=4'
+  '-DACTUATOR_ONOFF_GPIO=12'
+  '-DINPUT_GPIO=0'
+  '-DRF_RECEIVER_GPIO=4'
   '-DZgatewayRF="RF"'
   '-DGateway_Name="OpenMQTTGateway_SONOFF_BASIC_RFR3"'
 board_build.flash_mode = dout