Florian
c9e6de1a1c
* replace _PIN by _GPIO * add mention about the goal of -all binaries * [breaking] change json key from "pin" to "gpio" for actuatorONOFF
25 lines
1012 B
Markdown
25 lines
1012 B
Markdown
# GSM 2G gateway
|
|
## Compatible parts
|
|
|
|
|Module|Purpose|Where to Buy|
|
|
|-|-|-|
|
|
|A6|GSM GPRS module|[compatible parts list](https://docs.google.com/spreadsheets/d/1_5fQjAixzRtepkykmL-3uN3G5bLfQ0zMajM9OBZ1bx0/edit#gid=1323184277)|
|
|
|A7|GSM GPRS module with GPS|[compatible parts list](https://docs.google.com/spreadsheets/d/1_5fQjAixzRtepkykmL-3uN3G5bLfQ0zMajM9OBZ1bx0/edit#gid=1323184277)|
|
|
|
|
## Hardware setup
|
|
|
|
|Module Pin|NodeMCU / ESP8266 Pin|
|
|
|-|:-:|
|
|
|H_RXD|D6|
|
|
|H_TXD|D7|
|
|
|GND|GND|
|
|
|VCC5|MOSFET driven by D5|
|
|
|
|
For VCC5 you can power it directly all the time with an USB cable or use a MOSFET like [here](https://gitlab.com/stavros/A6-ESP8266-breakout/raw/master/images/schematic.png)
|
|
|
|
Don't use the nodemcu/wemos 5V pin for the A6/7 power, use a dedicated power supply for both or dedicated to the A6/7 with at least 2 amps ability.
|
|
|
|
So as to start your A6/7 module press the red button for 4 seconds, or link the PWR_KEY GPIO to VCC5.0 for the same time.
|
|
|
|
|