chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
85650a6204fe36b7351888100cac3fef9ba49d58
OpenMQTT-Gateway/main
T
History
Florian 85650a6204 [BT] Device tracker presence detection (#1548) 
Add device tracker detection and automatic creation following HA discovery convention
So as to trigger the away state, add an offline status to the identified BLE trackers
2023-03-20 07:31:00 -05:00
..
config_2G.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_ADC.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_AHTx0.h
Add AHTx0 Sensor (AHT10 and AHT20) (#687)
2020-07-04 09:40:06 -05:00
config_BH1750.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_BME280.h
Small fix on BME280 Config & CC1101-TXPower Throttle (#1382)
2023-01-10 20:13:06 +01:00
config_BT.h
[BT] Device tracker presence detection (#1548)
2023-03-20 07:31:00 -05:00
config_DHT.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_DS1820.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_FASTLED.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_GFSunInverter.h
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
config_GPIOInput.h
Add SHELLY PLUS 1 board with support of relay, switch, BT gateway (#1349)
2023-01-10 07:18:59 -06:00
config_GPIOKeyCode.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR04.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR501.h
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
config_HTU21.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_INA226.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_IR.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_LM75.h
Support LM75 temperature sensor (#1327)
2022-11-28 11:31:46 -06:00
config_LORA.h
[LORA] Added WiPhone LoRa support (#1458)
2023-03-12 12:09:45 -05:00
config_M5.h
Add the possibility to set LOG_LEVEL_LCD and LOG_TO_LCD for M5 boards from PIO (#1358)
2022-12-12 15:41:48 -06:00
config_mqttDiscovery.h
[HA Discovery] Auto Off timer (#1541)
2023-03-16 10:43:18 -05:00
config_ONOFF.h
[ONOFF] ESP32 Attempt to recover previous actuator state when power has been lost and overcurrent detection change (#1494)
2023-03-01 17:44:07 -06:00
config_PWM.h
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
config_RF.h
[RTL_433 Discovery] Add Govee water sensor Status entity (#1499)
2023-03-03 14:51:55 -06:00
config_RFM69.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_RN8209.h
RN8209 energy sensor support with watt, voltage and current. (#1337)
2022-11-29 18:41:47 -06:00
config_RS232.h
[RS232] add JSON parsing and hardware serial support to RS232 gateway (#1409)
2023-01-25 16:43:53 -06:00
config_SHTC3.h
Feature/add shtc3 (#843)
2021-01-05 19:17:39 -06:00
config_Somfy.h
added ZactuatorSomfy (#816)
2020-12-13 12:46:10 -06:00
config_SRFB.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_SSD1306.h
[SSD1306] Partial MAC address in BLE title (#1498)
2023-03-03 14:53:07 -06:00
config_TEMT6000.h
[TEMT] Added Temt6000 light sensor using a d1 mini (#1550)
2023-03-18 09:33:35 -05:00
config_TSL2561.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_WeatherStation.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
main.ino
[TEMT] Added Temt6000 light sensor using a d1 mini (#1550)
2023-03-18 09:33:35 -05:00
User_config.h
[TEMT] Added Temt6000 light sensor using a d1 mini (#1550)
2023-03-18 09:33:35 -05:00
ZactuatorFASTLED.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorONOFF.ino
[ONOFF] ESP32 Attempt to recover previous actuator state when power has been lost and overcurrent detection change (#1494)
2023-03-01 17:44:07 -06:00
ZactuatorPWM.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorSomfy.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZboardM5.ino
Add RGB Led management for errors, infos, and send receive events (#1320)
2022-11-16 12:58:22 -06:00
ZdisplaySSD1306.ino
[BT] Known Random MAC address filtering (#1514)
2023-03-09 09:35:16 -06:00
Zgateway2G.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayBLEConnect.h
[BT] Add BM2 voltage (#1495)
2023-03-02 11:02:03 -06:00
ZgatewayBLEConnect.ino
[BT] Add BM2 voltage (#1495)
2023-03-02 11:02:03 -06:00
ZgatewayBT.ino
[BT] Device tracker presence detection (#1548)
2023-03-20 07:31:00 -05:00
ZgatewayGFSunInverter.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayIR.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayLORA.ino
Fix for #1458: crash on ASCII and HEX data (#1526)
2023-03-12 15:52:24 -05:00
ZgatewayPilight.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF2.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF.ino
Small fix on BME280 Config & CC1101-TXPower Throttle (#1382)
2023-01-10 20:13:06 +01:00
ZgatewayRFM69.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayRS232.ino
[RS232] add JSON parsing and hardware serial support to RS232 gateway (#1409)
2023-01-25 16:43:53 -06:00
ZgatewayRTL_433.ino
[RTL_433 Discovery] Do not store the devices if discovery off (#1518)
2023-03-10 14:25:12 -06:00
ZgatewaySRFB.ino
[LORA] Added WiPhone LoRa support (#1458)
2023-03-12 12:09:45 -05:00
ZgatewayWeatherStation.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZmqttDiscovery.ino
[BT] Device tracker presence detection (#1548)
2023-03-20 07:31:00 -05:00
ZsensorADC.ino
Adc bugfix (#1328)
2022-11-28 11:35:11 -06:00
ZsensorAHTx0.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBH1750.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBME280.ino
ssd1306 display of module messages (#1383)
2023-01-11 20:31:12 -06:00
ZsensorDHT.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDS1820.ino
fix pub of res field (#1311)
2022-11-03 07:40:51 -05:00
ZsensorGPIOInput.ino
Fix for failed build with ZsensorGPIOInput and ESPWifiManualSetup (#1479)
2023-02-23 13:54:25 -06:00
ZsensorGPIOKeyCode.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR04.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorHCSR501.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorHTU21.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorINA226.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorLM75.ino
Support LM75 temperature sensor (#1327)
2022-11-28 11:31:46 -06:00
ZsensorRN8209.ino
[RN8209] Avoid power returning 0 (#1497)
2023-03-02 11:12:11 -06:00
ZsensorSHTC3.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorTEMT6000.ino
[TEMT] Added Temt6000 light sensor using a d1 mini (#1550)
2023-03-18 09:33:35 -05:00
ZsensorTSL2561.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
zzHTTPUpdate.cpp
Support Home Assistant Long-term Statistics #1087 (#1088)
2021-10-14 18:46:13 -05:00
zzHTTPUpdate.h
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00