* Define MQTTsetMQTT for configuring MQTT over MQTT
* Enable MQTTsetMQTT per default on all ESP except RFBridge
Co-authored-by: Dave <d.kneisz@gmail.com>
This will enable using button on the gateway to switch any controlled attached actuators/relays when pressed.
Adds the following macros:
- ACTUATOR_ON; 0 or 1, set to the output level of the gpio pin to turn the actuator on.
- ACTUATOR_ONOFF_DEFAULT; ACTUATOR_ON or !ACTUATOR_ON, set to the state desired on reset.
- ACTUATOR_BUTTON_TRIGGER_LEVEL; 0 or 1, set to the sensing level which to detect a button press to change the actuator state.
This adds the ability to specify if the MQTT broker connection is secure via a checkbox on the config page of WiFiManager.
Also added to the WiFiManager config page is a text box to enter the brokers TLS certificate.
In the case of using manual configuration a new macro is created MQTT_SECURE_DEFAULT.
When defined as true a secure connection will be requested and the certificate defined in user_config.h will be used.
* Update to SmartRC-CC1101-Driver-Lib@^2.5.4 and removal of workaround from #847
Tks to @LSatan workaround no longer needed
https://github.com/LSatan/SmartRC-CC1101-Driver-Lib/issues/65
* Default to value as subject for rtl_433 and receiver switching
* Default to not publishing unparsed signals
* Fix for missing String for uint64_t
* Fix is only required when value a subject is defined and not PiLight
Co-authored-by: Northern Man <sgracey@Heisenberg.local>
If enabled in user_config.h this will trigger the OMG to update it's firmware from the link
provided in the MQTT message.
Example message:
{\"version\":\"test\",\"password\":\"OMGPASSWORD\",\"url\":\"https://github.com/1technophile/OpenMQTTGateway/releases/download/v0.9.6/esp32dev-ble-cont-firmware.bin\"}
If the firmware version in the message is not the same as the current OMG version the device will self update using the link in the url of the message.
* PR #934
* Active Receiver Switching
Switching of the active receiver module is available between the RF,
RF2, RTL_433 and Pilight Gateway modules, allowing for changing of
signal decoders without redploying the openMQTTGateway package.
Sending a JSON message to the command topic of the desired receiver
will change the active receiver module.
Other minor adjustments/improvements
1 - Improved startup serial logging that includes
- OpenMQTTGateway Version
- OpenMQTTGateway Modules
2 - Trace logging of full Gateway module command topic
- Enabled in RF, RF2, PiLight and RTL_433
3 - Updated RTL_433 Documentation to only include enabled ASK/OOK
device decoders
4 - Trace logging of MQTT Callback topic
* Regression testing
* Adding valueAsASubject support to rtl_433_ESP
- model and id keys are appended to message topic
* Increased memory size for receiver switching in blocking build all
Co-authored-by: Northern Man <sgracey@Heisenberg.local>
* BLE low power mode and settings optimization
-low power mode settings example
-take into account parameters following #891
-add esp32dev-ble-cont for door/window sensor listening
* Disable WDT during scan
* update esp32 arduino framework
* Support for changing CC1101 Receive and Transmit Frequency
* Docs
* Resolve feedback
* Update Somfy module to use Global receiveMhz
ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to
setting a new frequency
* Initial generalization from a PWM LED controller, to a PWM controller.
Allow the config file to set the name of each channel and the number of channels.
Fade time is now per-channel, so MQTT messages can genuinely set an individual channel, and specify the fade time for that channel.
The default gamma is configurable in the config.
-replace low power led by led info
-enable to change the led ON value
-go upper case for the led macros
Also transform BLE connect warning to notice in log
Add Sonoff RF Bridge LED
* Add LYWSD03MMC and MHO-C401 device
and an associated BLE connect mechanism as these devices advertise only encrypted data
-free manufacturer data
-update library
* Implement scans number before connect
-Add the possibility to do a connect every X scan
-Rename variables for consistency
-Some refactoring for improved code reading
* added support for secure TLS connections
on ESP32 and ESP8266 close#101
* added TLS test builds
* added documentation for TLS
fixed some some issues in the documentation
* added documentation for error code=54
* handle 64 bits values, except for UNO
Arduino UNO is not enough powerfull to handle properly uint64_t in terms of memory so differenciate the variable type depending on the board type
With this configuration ATMega will not be able to receive with simpleReceiving 64 bits values. Of course Json will work with 64 bits values for this board.
* Simplify jsondata.success() condition
* Renamings and optimize deduplication functions
* replace 2 dimensions array by a structure so as to handle the time with an uint32_t when using an ESP (instead of a uint64_t)
* change storeValue and isAduplicate function names
* point to the rcswitch revision with the new 40 bits protocol
Co-authored-by: Leon Kiefer <leon.k97@gmx.de>
