Received signals are published to the subjectRF2toMQTT topic (/RF2toMQTT). However, echos of mqtt messages are published to the topic subjectGTWRF2toMQTT (/433toMQTT). That seems quite inconsistent.
* Support for changing CC1101 Receive and Transmit Frequency
* Docs
* Resolve feedback
* Update Somfy module to use Global receiveMhz
ELECHOUSE_cc1101.SpiStrobe(CC1101_SIDLE); // Idle receiver prior to
setting a new frequency
* Declare sendIdentifiedPRotocol so MQTTtoIR finds it
Avoids this compilation error on Arduino IDE 1.8.13:
```c
ZgatewayIR:258:90: error: 'sendIdentifiedProtocol' was not declared in this scope
signalSent = sendIdentifiedProtocol(protocol_name, data, hex, valueBITS, valueRPT);
``` ^
* Remove trailing spaces
I *think* that was the linter complaint (given it shows no message, and before/after parts in diff are visually identical
Create automatically devices into Home Assistant through MQTT auto discovery
Before, only entities were created automaticaly and they were not linked to a device.
Enable HASS to retrieve data of remote sensors from multiple gateways by using wildcards for the location (instead of default:home) and the gateway name (instead of default:OpenMQTTGateway)
* Correct buffer processing
was missing an instruction due to a previous refactoring
* Correct duplicate condition
* Avoid publishing \n into the raw value
* Merge extract_char and value_from_service_data functions
* Add ability to specify repeats for raw Pilight strings
* Updated RF Pilight doc to add raw transmission tut
Added information about transmitting raw messages using the MQTTtoPilight topic, including using the new repeats functionality. Fixed some scattered English mistakes.
Before the fix:
{"id":"58:2D:34:50:A0:D0","name":"Qingping Alarm Clock","rssi":-82,"distance":11.4949,"servicedata":"080cd0a050342d580104c0007c02"}
The servicedata string does not match any pattern so is not parsed
After the fix:
{"id":"58:2D:34:50:A0:D0","name":"Qingping Alarm Clock","rssi":-83,"distance":12.61001,"model":"CGD1","tem":19.2,"tempc":19.2,"tempf":66.56,"hum":63.5}
The parser is invoked and the data is output as expected.
There are probably too many brackets (I'm not a C dev) and I can't test on whatever version of CGD1 broadcasts 080caf or 080c09 servicedata strings.
* MQTT discovery improvements
-remove gatewayBT
-remove device class formaldehyde (not existing in HASS)
-add SYStoMQTT new parameters
-attach connectivity parameter to the device
-add BT gateway infos and switches
-refactor modules storage and publication
* Add Home Assistant auto discovery feature
Add HA auto discovery to RF2.
For each unique combination of unit, groupbit and address a switch will be added to Home Assistant called: "RF2_[unit]_[groupbit])_[address].
As RF2 433Mhz switches do not render their state, no state topic will be provided in the discovery.
This will cause the switch to be in optimistic mode in HA with separate on and off icons.
The two separate on/off icons allow for subsequent on commands to support the dimming feature of KAKU switches like ACM-300.
Co-authored-by: hbraam <hbraam@users.noreply.github.com>
* Initial generalization from a PWM LED controller, to a PWM controller.
Allow the config file to set the name of each channel and the number of channels.
Fade time is now per-channel, so MQTT messages can genuinely set an individual channel, and specify the fade time for that channel.
The default gamma is configurable in the config.
-replace low power led by led info
-enable to change the led ON value
-go upper case for the led macros
Also transform BLE connect warning to notice in log
Add Sonoff RF Bridge LED
Florian