* [SYS] Configuration portal for Ethernet board
Enable Wifi Manager as a configuration portal for Ethernet boards, also leverage the Wifi Access point as a fallback connectivity method
Add link to the WebUI from HA and reduce key length
* Remove unnecessary environment
Now that one environment cans support wifi and ethernet, merge the 2
* [LORA] Capability to change LORA frequency and Add OLED
Merge of the 2 environments for TTGO V1
* Merge messages keys with upper level json
* Id as a sub topic
* Add display and state measures
* Add frequency configuration through WebUI
* Add parameters
* Add auto discovery
* Add node example for ttgo lora32 v1
* Add environments and fix scope
* Support for sync word as a byte
* Fix TX Power setting
* Add LoRa gateway description
* Add onlyknown filter
Update to rtl_433_ESP 0.3.0
Resolves issue with sx127x chipset and receiving higher frequencies
Includes support for receiving FSK signals, requires compiler directive OOK_MODULATION=false to switch to FSK mode
Adds unit of measure for rtl_433/battery_ok devices RTL_433_ESP Battery Auto Discovery Missing Unit of Measurement #1644
Updates value template for rtl_433/battery_ok in openHab mode
Resolves out of stack space crash lilygo-rtl_433 crash after chacon remote control button pressed #1655
* [DISC] Add runtime configuration for OpenHAB
Add an MQTT configurable system key "ohdiscovery" for OpenHAB auto discovery
* Docs and environments update
Description:
1 - Fix nextDisplayPage/nextWebUIPage sync with SSD1306
2 - Discovery message name is SS1306
3 - Stack size tuning - ARDUINO_LOOP_STACK_SIZE=9600
With this change, in your personal ESP32 platformio environments you need to change ${com-esp.build_flags} to ${com-esp32.build_flags} and ${com-esp.lib_deps} to ${com-esp32.lib_deps}
4 - On information page, fix module display
5 - Set OTA URL to String systemUrl = RELEASE_LINK + latestVersion + "/" + ENV_NAME + "-firmware.bin";
6 - Allow back level espressif32 framework support
* Add Adafruit NeoPixel library #defines
* Currently FastLED causes rapid reboots on ESP32C3 boards when OMG signals.
Onboard RGB LEDs can be adressed more reliably with the NeoPixel library.
Define RGB_INDICATORS=2 to use this addition.
* rebase fix: adapt to "Bump ESP32" changes in development
* Add build environments for the Espressiv ESP32-C3-DevKitC-02 board
* esp32c3-dev-c2-ble and esp32c3-dev-c2-ble-no-serial environments both
use the Adafruit NeoPixel library for the onboard RGB LED as FastLED
causes rapid reboots.
* Only occasional reboots of this board occure when serial output is not
read. The -no-serial version further improves stability.
* Add a build environment for the Espressiv ESP32-C3-DevKitC-02 board
* The esp32c3-dev-c2-ble offers a reasonable compromise between logging
and stability of OMG on this board.
* Bump ESP32 platform to v6.1.0 and ESP8266 to v4.1.0
* Fix ESP32 not connecting to Ethernet
And remove check updates as it is now done every hour
* Do not define LED pins if not explicitly stated
* OLED need to be reset for Heltec Lora 32 V2
* Fix issue with SSD1306 saving
* Add environment for board Wemos Lolin C3 mini
* Lolin C3 mini: disable serial output as a default
---------
Co-authored-by: Argafal <dev.omg@argafal.de>
* BLE Display - THB, THBX, PLANT, AIR, BATT, BODY
* SCALE
* BBQ
* Filter MS-CDP, GAEN and IBEACON
* Mopeka & Smart Dry
* ACEL
ACEL sensor, as most also have temp and hum, but no acceleration info display included so far.
* Only display when properties are present
Only display when properties are present, to avoid model only display for devices which require active scanning at a larger interval, e.g. Mi Band and similar.
* LilyGo-BLE environment
* BLE display relocated
BLE display relocated to have pubadvdata "type" in message, required for the different type display functions.
* [OTA] Add automatic OTA updates
This feature will enable to update the gateway with one button or a simple MQTT command.
* [CI] Enable automatic OTA for nightly development builds
And integrate the latest_version file creation into the CI
Enable to specify a particular version
and switch between dev and production builds
* [BT] Adaptive scan
Add adaptive scan to avoid users setting parameters and deduct automatically the scan requirements from the list of devices
---------
Co-authored-by: DigiH <github@digih.net>
* [DOCS] - Generate board documentation automaticaly from platformio.ini
To reduce maintenance effort
* [CI] Differentiate boards from platformio.ini
So that only one line can be commented to use customs environments
Manual control with a button press triggered the relay but 2 times (when pressing and releasing), fixing this.
Check that we have two consecutive readings of temperature above the threshold to trigger the actuator to OFF
And remove it by default to the shelly, as I see unjustified jumps of temperature above 80C.
The previous macro used SENS_SAR_MEAS_WAIT2_REG to identify if we have the reading capability was not working, so replacing it by a fresh one NO_INT_TEMP_READING, defined as a negation due to the fact that most of the ESP32 supports internal temperature reading.
* Add automatic stop of relay following ESP32 temperature
To avoid overheating when too much current goes through the device.
Add internal temperature reporting to SYStoMQTT
This function is not available with ESP32 S3 and C3
* Temp update and error log
Update of the temperature to get closer to the datasheet of the ESP32 -40 +85C
and add the module name to the error log
This also changes the topic structure when using the macro valueAsATopic=true, it adds as sub-topics the `type, subtype, and channel` when they exist.
The id is the last subtopic to facilitate filtering, as it may change when replacing the batteries.
Co-authored-by: NorthernMan54 <19808920+NorthernMan54@users.noreply.github.com>
* Update to rtl_433_ESP 0.1.5
Includes support for LILYGO® LoRa32 V2.1_1.6.1 433 Mhz
* Fix lint issue
* Fix build and lint issues
* Add lilygo-rtl_433 to build.yml
Florian