* User friendly manual network configuration
* Add manual network config to the docs
* Add manual network config to the test env
Co-authored-by: DigiH <github@digih.net>
Add a macro to enable removal of update checks
Separate certificates from user_config.h
Consider latest version as the default
Do not use a cert if the url is not
Simplify AWS macro scope
* Add Adafruit NeoPixel library #defines
* Currently FastLED causes rapid reboots on ESP32C3 boards when OMG signals.
Onboard RGB LEDs can be adressed more reliably with the NeoPixel library.
Define RGB_INDICATORS=2 to use this addition.
* rebase fix: adapt to "Bump ESP32" changes in development
* Add build environments for the Espressiv ESP32-C3-DevKitC-02 board
* esp32c3-dev-c2-ble and esp32c3-dev-c2-ble-no-serial environments both
use the Adafruit NeoPixel library for the onboard RGB LED as FastLED
causes rapid reboots.
* Only occasional reboots of this board occure when serial output is not
read. The -no-serial version further improves stability.
* Add a build environment for the Espressiv ESP32-C3-DevKitC-02 board
* The esp32c3-dev-c2-ble offers a reasonable compromise between logging
and stability of OMG on this board.
Add support for the ESP8266 deep sleep and required change for DS1820 sensor used in my project.
Allow defining DS1820_RESOLUTION and DS1820_INTERVAL_SEC in ENVIRON without editing config file.
Allow DTimeBetweenReadingmq2 Env. MACRO change without editing source config file.
Added some an example ENVIRONMENTS
Add ESP8266_DEEP_SLEEP_IN_US to nodemcuv2-all-test
* Bump ESP32 platform to v6.1.0 and ESP8266 to v4.1.0
* Fix ESP32 not connecting to Ethernet
And remove check updates as it is now done every hour
* Do not define LED pins if not explicitly stated
* OLED need to be reset for Heltec Lora 32 V2
* Fix issue with SSD1306 saving
Add optional timestamps to the SYStoMQTT and modules messages
Also, the sync with the NTP time server now occurs every hour (can be defined with TimeBetweenCheckingSYS in UserConfig.h)
* Fix WiFi interference on PIR
* Added to DOCS re: WiFi interference.
* Add sufficx -custom to configs without prod binaries
* Add ESP32 Wifi band and tx power to user_config.h
---------
Co-authored-by: andre <agreylin@gmail.com>
* [OTA] Add automatic OTA updates
This feature will enable to update the gateway with one button or a simple MQTT command.
* [CI] Enable automatic OTA for nightly development builds
And integrate the latest_version file creation into the CI
Enable to specify a particular version
and switch between dev and production builds
To enable boards with the constant power supply to don't build this function.
Change the default behavior for the mode not to be built by default.
Only the boards with batteries are keeping it
The previous macro used SENS_SAR_MEAS_WAIT2_REG to identify if we have the reading capability was not working, so replacing it by a fresh one NO_INT_TEMP_READING, defined as a negation due to the fact that most of the ESP32 supports internal temperature reading.
* Update to rtl_433_ESP 0.1.5
Includes support for LILYGO® LoRa32 V2.1_1.6.1 433 Mhz
* Fix lint issue
* Fix build and lint issues
* Add lilygo-rtl_433 to build.yml
* added thingspulse gateways
* added thingspulse gateways, RGB LED for tinypico
* Added some LED and Birghtness options
* Requested Changes
* fixed format
so as to don't disclose the password used for WM.
Also change the wm password from MAc to be the last 8 digits, as these will change more than the first 8 ones.
Also make consistent the ifndef qnd the parsing between WM_PWD_FROM_MAC and USE_MAC_AS_GATEWAY_NAME
* First draft of LM75 sensor based on HTU21 sensor
* Initialise I2C on ESP8266
* Add LM75 sensor to test builds
So that it will be tested with the continuous integration
* Add RGB Led management for errors, infos, and send receive events
Add RGB led management for indicators, integrate it for M5 Atom and ESP32 C3 and S3 dev board
Update Fastled version to 3.5.0.
The default behavior is with regular LED, to use RGB Led the macro RGB_INDICATORS needs to be define, along with the FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO and FASTLED_IND_NUM_LEDS
Note that some RGB led need to have a different color scheme, so in this case it can be entered along with the data PIN definition: -DFASTLED_IND_DATA_GPIO=27,GRB
* Add FastLed library to the environments
* Handle OTA actively when MQTT is not connected
Resolves#1292
* Fix compilation for targets not having OTA
* ArduinoOTA.handle() only with non-ESP targets
* OTA check before reboot: fix condition and add more comments
Signed-off-by: Sami Salonen <ssalonen@gmail.com>
The main features of the upgrade to 0.1.3 of rtl_433_ESP are
1 - Change Transceiver Library to RadioLib
2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).
3 - Added automatic calibration of the RSSI Signal detection Threshold
4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task
5 - Moved received signal decoding to a ESP32 Task
6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.
7 - Multi Receiver support has been validated with RF, RF2 and PiLight
* Publishing/receiving inconsistencies
* General platformio.ini changes
General platformio.ini changes to allow for publishing/receiving settings to be defined in User_cofig.h instead of them only working if defined in the environments. Kept separate so far for discussion.
* Behaviour when MQTT and/or Wifi is not available
I was looking into why all my OpenMQTTGateway devices were not responding after a recent power failure and am speculating that the ESP32 was able to restart faster than my Wifi and MQTT Server was able to restart and resume operations. And was thinking that a generic ESP.restart may be a reasonable approach with repeated Wifi and/or MQTT connection failures.
As mentioned here https://community.openmqttgateway.com/t/behaviour-when-mqtt-and-or-wifi-is-not-available/1747
Added new variable maxRetryWatchDog, which is the maximum number of mqtt or wifi connection attempts before restarting gateway device.
