chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
33e162111a8ce647f51c8f798a19b99f8a4f41da
OpenMQTT-Gateway/main/User_config.h
T
Florian 33e162111a Add RGB Led management for errors, infos, and send receive events (#1320) 
* Add RGB Led management for errors, infos, and send receive events

Add RGB led management for indicators, integrate it for M5 Atom and ESP32 C3 and S3 dev board
Update Fastled version to 3.5.0.

The default behavior is with regular LED, to use RGB Led the macro RGB_INDICATORS needs to be define, along with the FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO and FASTLED_IND_NUM_LEDS
Note that some RGB led need to have a different color scheme, so in this case it can be entered along with the data PIN definition: -DFASTLED_IND_DATA_GPIO=27,GRB

* Add FastLed library to the environments
2022-11-16 12:58:22 -06:00

552 lines
21 KiB
C
Raw Blame History

/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
This program enables to:
- receive MQTT data from a topic and send signals corresponding to the received MQTT data
- publish MQTT data to a different topic related to received signals
Copyright: (c)Florian ROBERT
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef user_config_h
#define user_config_h
/*-------------------VERSION----------------------*/
#ifndef OMG_VERSION
# define OMG_VERSION "version_tag"
#endif
/*-------------CONFIGURE WIFIMANAGER-------------(only ESP8266 & SONOFF RFBridge)*/
/*
* The following parameters are set during the WifiManager setup process:
* - wifi_ssid
* - wifi_password
* - mqtt_user
* - mqtt_pass
* - mqtt_server
* - mqtt_port
*
* To completely disable WifiManager, define ESPWifiManualSetup.
* If you do so, please don't forget to set these variables before compiling
*
* Otherwise you can provide these credentials on the web interface after connecting
* to the access point with your password (SSID: WifiManager_ssid, password: WifiManager_password)
*/
/*-------------DEFINE GATEWAY NAME BELOW IT CAN ALSO BE DEFINED IN platformio.ini----------------*/
// Uncomment to use the MAC address in the format of 112233445566 as the gateway name
// Any definition of Gateway_Name will be ignored. The Gateway_Short_name _ MAC will be used as the access point name.
//#define USE_MAC_AS_GATEWAY_NAME
#ifndef Gateway_Name
# define Gateway_Name "OpenMQTTGateway"
#endif
#ifndef Gateway_Short_Name
# define Gateway_Short_Name "OMG"
#endif
#ifndef Base_Topic
# define Base_Topic "home/"
#endif
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
//#define NetworkAdvancedSetup true //uncomment if you want to set advanced network parameters, not uncommented you can set the IP and mac only
#ifdef NetworkAdvancedSetup
# if defined(ESP8266) || defined(ESP32)
const byte ip[] = {192, 168, 1, 99}; //IP address of the gateway, already defined for arduino below
# endif
const byte gateway[] = {0, 0, 0, 0};
const byte Dns[] = {0, 0, 0, 0};
const byte subnet[] = {255, 255, 255, 0};
#endif
#if defined(ESP8266) || defined(ESP32) // for nodemcu, weemos and esp8266
//# define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
#else // for arduino boards
const byte ip[] = {192, 168, 1, 99};
const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield MAC address
#endif
//#define ESP32_ETHERNET=true // Uncomment to use Ethernet module on ESP32 Ethernet gateway and adapt the settings to your board below, the default parameter are for OLIMEX ESP32 Gateway
#ifdef ESP32_ETHERNET
# ifndef ETH_PHY_ADDR
# define ETH_PHY_ADDR 0
# endif
# ifndef ETH_PHY_TYPE
# define ETH_PHY_TYPE ETH_PHY_LAN8720
# endif
# ifndef ETH_PHY_POWER
# define ETH_PHY_POWER 12
# endif
# ifndef ETH_PHY_MDC
# define ETH_PHY_MDC 23
# endif
# ifndef ETH_PHY_MDIO
# define ETH_PHY_MDIO 18
# endif
# ifndef ETH_CLK_MODE
# define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT
# endif
#endif
#if defined(ESPWifiManualSetup) // for nodemcu, weemos and esp8266
# ifndef wifi_ssid
# define wifi_ssid "wifi ssid"
# endif
# ifndef wifi_password
# define wifi_password "wifi password"
# endif
#endif
#ifndef WifiManager_password
# define WifiManager_password "your_password" //this is going to be the WPA2-PSK password for the initial setup access point
#endif
#ifndef WifiManager_ssid
# define WifiManager_ssid Gateway_Name //this is the network name of the initial setup access point
#endif
#ifndef WifiManager_ConfigPortalTimeOut
# define WifiManager_ConfigPortalTimeOut 120
#endif
#ifndef WifiManager_TimeOut
# define WifiManager_TimeOut 5
#endif
#ifndef WM_DEBUG_LEVEL
# define WM_DEBUG_LEVEL 1 // valid values are: DEBUG_ERROR = 0, DEBUG_NOTIFY = 1, DEBUG_VERBOSE = 2, DEBUG_DEV = 3, DEBUG_MAX = 4
#endif
//#define WIFIMNG_HIDE_MQTT_CONFIG //Uncomment so as to hide MQTT setting from Wifi manager page
/*-------------DEFINE YOUR ADVANCED NETWORK PARAMETERS BELOW----------------*/
//#define MDNS_SD //uncomment if you want to use mDNS for discovering automatically your IP server, please note that mDNS with ESP32 can cause the BLE to not work
#define maxConnectionRetry 10 //maximum MQTT connection attempts before going to wifimanager setup if never connected once
#define maxConnectionRetryWifi 5 //maximum Wifi connection attempts with existing credential at start (used to bypass ESP32 issue on wifi connect)
#define maxRetryWatchDog 11 //maximum Wifi or MQTT re-connection attempts before restarting
//set minimum quality of signal so it ignores AP's under that quality
#define MinimumWifiSignalQuality 8
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
//MQTT Parameters definition
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
# define parameters_size 60
# define mqtt_topic_max_size 150
# ifndef mqtt_max_packet_size
# ifdef MQTT_HTTPS_FW_UPDATE
# define mqtt_max_packet_size 2560
# else
# define mqtt_max_packet_size 1024
# endif
# endif
#else
# define parameters_size 30
# define mqtt_topic_max_size 75
# define mqtt_max_packet_size 128
#endif
#ifndef MQTT_USER
# define MQTT_USER "your_username"
#endif
#ifndef MQTT_PASS
# define MQTT_PASS "your_password"
#endif
#ifndef MQTT_SERVER
# define MQTT_SERVER "192.168.1.17"
#endif
#ifndef MQTT_PORT
# define MQTT_PORT "1883"
#endif
#if defined(ESP8266) || defined(ESP32)
// Uncomment to use a device running TheengsGateway to decode BLE data. (https://github.com/theengs/gateway)
// Set the topic to the subscribe topic configured in the TheengGateway
// #define MQTTDecodeTopic "MQTTDecode"
// The root ca certificate used for validating the MQTT broker
// The certificate must be in PEM ascii format
const char* certificate PROGMEM = R"EOF("
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
")EOF";
# define ATTEMPTS_BEFORE_BG 10 // Number of wifi connection attempts before going to BG protocol
# define ATTEMPTS_BEFORE_B 20 // Number of wifi connection attempts before going to B protocol
# ifndef NTP_SERVER
# define NTP_SERVER "pool.ntp.org"
# endif
# ifndef MQTT_SECURE_DEFAULT
# define MQTT_SECURE_DEFAULT false
# endif
# ifndef AWS_IOT
# define AWS_IOT false
# endif
//# define MQTT_HTTPS_FW_UPDATE //uncomment to enable updating via MQTT message.
# ifdef MQTT_HTTPS_FW_UPDATE
// If used, this should be set to the root CA certificate of the server hosting the firmware.
// The certificate must be in PEM ascii format.
// The default certificate is for github.
const char* OTAserver_cert PROGMEM = R"EOF("
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
")EOF";
# ifndef MQTT_HTTPS_FW_UPDATE_USE_PASSWORD
# define MQTT_HTTPS_FW_UPDATE_USE_PASSWORD 1 // Set this to 0 if not using TLS connection to MQTT broker to prevent clear text passwords being sent.
# endif
# endif
# ifndef MQTT_SECURE_SELF_SIGNED
# define MQTT_SECURE_SELF_SIGNED 0
# endif
# ifndef MQTT_SECURE_SELF_SIGNED_CLIENT
# define MQTT_SECURE_SELF_SIGNED_CLIENT 1 // If using a self signed certificate for the broker and not using client certificates set this to false or 0
# endif
# ifndef MQTT_SECURE_SELF_SIGNED_INDEX_DEFAULT
# define MQTT_SECURE_SELF_SIGNED_INDEX_DEFAULT 0
# endif
# if MQTT_SECURE_SELF_SIGNED
const char* ss_server_cert PROGMEM = R"EOF("
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
")EOF";
const char* ss_client_cert PROGMEM = R"EOF("
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
")EOF";
const char* ss_client_key PROGMEM = R"EOF("
-----BEGIN RSA PRIVATE KEY-----
...
-----END RSA PRIVATE KEY-----
")EOF";
struct ss_certs {
const char* server_cert;
const char* client_cert;
const char* client_key;
};
struct ss_certs certs_array[2] = {
{ss_server_cert, ss_client_cert, ss_client_key},
{ss_server_cert, ss_client_cert, ss_client_key}};
static_assert(MQTT_SECURE_SELF_SIGNED_INDEX_DEFAULT < (sizeof(certs_array) / sizeof(ss_certs)),
"Invalid MQTT self signed default index");
# endif
#endif
/*------------------DEEP SLEEP parameters ------------------*/
//DEFAULT_LOW_POWER_MODE 0 to normal mode (no power consumption optimisations)
//DEFAULT_LOW_POWER_MODE 1 to activate deep sleep
//DEFAULT_LOW_POWER_MODE 2 to activate deep sleep (LCD is turned OFF)
#ifdef ESP32
# ifndef DEFAULT_LOW_POWER_MODE
# define DEFAULT_LOW_POWER_MODE 0
# endif
int lowpowermode = DEFAULT_LOW_POWER_MODE;
#endif
/*-------------DEFINE THE MODULES YOU WANT BELOW----------------*/
//Addons and module management, uncomment the Z line corresponding to the module you want to use
//#define ZgatewayRF "RF" //ESP8266, Arduino, ESP32
//#define ZgatewayIR "IR" //ESP8266, Arduino, Sonoff RF Bridge
//#define ZgatewayLORA "LORA" //ESP8266, Arduino, ESP32
//#define ZgatewayPilight "Pilight" //ESP8266, Arduino, ESP32
//#define ZgatewayWeatherStation "WeatherStation" //ESP8266, Arduino, ESP32
//#define ZgatewayGFSunInverter "GFSunInverter" //ESP32
//#define ZgatewayBT "BT" //ESP8266, ESP32
//#define ZgatewayRF2 "RF2" //ESP8266, Arduino, ESP32
//#define ZgatewaySRFB "SRFB" // Sonoff RF Bridge
//#define Zgateway2G "2G" //ESP8266, Arduino, ESP32
//#define ZgatewayRFM69 "RFM69" //ESP8266, Arduino, ESP32
//#define ZactuatorONOFF "ONOFF" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZsensorINA226 "INA226" //ESP8266, Arduino, ESP32
//#define ZsensorHCSR04 "HCSR04" //ESP8266, Arduino, ESP32
//#define ZsensorHCSR501 "HCSR501" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZsensorADC "ADC" //ESP8266, Arduino, ESP32
//#define ZsensorBH1750 "BH1750" //ESP8266, Arduino, ESP32
//#define ZsensorTSL2561 "TSL2561" //ESP8266, Arduino, ESP32
//#define ZsensorBME280 "BME280" //ESP8266, Arduino, ESP32
//#define ZsensorHTU21 "HTU21" //ESP8266, Arduino, ESP32
//#define ZsensorDHT "DHT" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZsensorDS1820 "DS1820" //ESP8266, Arduino, ESP32
//#define ZsensorGPIOKeyCode "GPIOKeyCode" //ESP8266, Arduino, ESP32
//#define ZsensorGPIOInput "GPIOInput" //ESP8266, Arduino, ESP32
//#define ZmqttDiscovery "HADiscovery"//ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZactuatorFASTLED "FASTLED" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZboardM5STICKC "M5StickC"
//#define ZboardM5STICKCP "M5StickCP"
//#define ZboardM5STACK "M5STACK"
//#define ZboardM5TOUGH "M5TOUGH"
//#define ZradioCC1101 "CC1101" //ESP8266, ESP32
//#define ZactuatorPWM "PWM" //ESP8266, ESP32
//#define ZsensorSHTC3 "SHTC3" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZactuatorSomfy "Somfy" //ESP8266, Arduino, ESP32
//#define ZgatewayRS232 "RS232" //ESP8266, Arduino, ESP32
/*-------------DEFINE YOUR MQTT ADVANCED PARAMETERS BELOW----------------*/
#ifndef version_Topic
# define version_Topic "/version"
#endif
#ifndef will_Topic
# define will_Topic "/LWT"
#endif
#ifndef will_QoS
# define will_QoS 0
#endif
#ifndef will_Retain
# define will_Retain true
#endif
#ifndef will_Message
# define will_Message "offline"
#endif
#ifndef Gateway_AnnouncementMsg
# define Gateway_AnnouncementMsg "online"
#endif
#ifndef jsonPublishing
# define jsonPublishing true //define false if you don't want to use Json publishing (one topic for all the parameters)
#endif
//example home/OpenMQTTGateway_ESP32_DEVKIT/BTtoMQTT/4XXXXXXXXXX4 {"rssi":-63,"servicedata":"fe0000000000000000000000000000000000000000"}
#ifndef jsonReceiving
# define jsonReceiving true //define false if you don't want to use Json reception analysis
#endif
#ifndef simplePublishing
# define simplePublishing false //define true if you want to use simple publishing (one topic for one parameter)
#endif
//example
// home/OpenMQTTGateway_ESP32_DEVKIT/BTtoMQTT/4XXXXXXXXXX4/rssi -63.0
// home/OpenMQTTGateway_ESP32_DEVKIT/BTtoMQTT/4XXXXXXXXXX4/servicedata fe0000000000000000000000000000000000000000
#ifndef simpleReceiving
# define simpleReceiving true //define false if you don't want to use old way reception analysis
#endif
/*-------------DEFINE YOUR OTA PARAMETERS BELOW----------------*/
#ifndef ota_hostname
# define ota_hostname Gateway_Name
#endif
#ifndef ota_password
# define ota_password "OTAPASSWORD"
#endif
#ifndef ota_port
# define ota_port 8266
#endif
// timeout for OTA activities
// OTA upload with no activity in this period is considered inactive
// As long as OTA upload is considered "active", we avoid rebooting e.g.
// in case of failures connecting to MQTT
#ifndef ota_timeout_millis
# define ota_timeout_millis 30000
#endif
#ifndef RGB_INDICATORS // Management of Errors, reception/emission and informations indicators with basic LED
/*-------------DEFINE PINs FOR STATUS LEDs----------------*/
# ifndef LED_SEND_RECEIVE
# ifdef ESP8266
# define LED_SEND_RECEIVE 40
# elif ESP32
# define LED_SEND_RECEIVE 40
# elif __AVR_ATmega2560__ //arduino mega
# define LED_SEND_RECEIVE 40
# else //arduino uno/nano
# define LED_SEND_RECEIVE 40
# endif
# endif
# ifndef LED_SEND_RECEIVE_ON
# define LED_SEND_RECEIVE_ON HIGH
# endif
# ifndef LED_ERROR
# ifdef ESP8266
# define LED_ERROR 42
# elif ESP32
# define LED_ERROR 42
# elif __AVR_ATmega2560__ //arduino mega
# define LED_ERROR 42
# else //arduino uno/nano
# define LED_ERROR 42
# endif
# endif
# ifndef LED_ERROR_ON
# define LED_ERROR_ON HIGH
# endif
# ifndef LED_INFO
# ifdef ESP8266
# define LED_INFO 44
# elif ESP32
# define LED_INFO 44
# elif __AVR_ATmega2560__ //arduino mega
# define LED_INFO 44
# else //arduino uno/nano
# define LED_INFO 44
# endif
# endif
# ifndef LED_INFO_ON
# define LED_INFO_ON HIGH
# endif
# define SetupIndicators() \
pinMode(LED_SEND_RECEIVE, OUTPUT); \
pinMode(LED_INFO, OUTPUT); \
pinMode(LED_ERROR, OUTPUT); \
SendReceiveIndicatorOFF(); \
InfoIndicatorOFF(); \
ErrorIndicatorOFF();
# define ErrorIndicatorON() digitalWrite(LED_ERROR, LED_ERROR_ON)
# define ErrorIndicatorOFF() digitalWrite(LED_ERROR, !LED_ERROR_ON)
# define SendReceiveIndicatorON() digitalWrite(LED_SEND_RECEIVE, LED_SEND_RECEIVE_ON)
# define SendReceiveIndicatorOFF() digitalWrite(LED_SEND_RECEIVE, !LED_SEND_RECEIVE_ON)
# define InfoIndicatorON() digitalWrite(LED_INFO, LED_INFO_ON)
# define InfoIndicatorOFF() digitalWrite(LED_INFO, !LED_INFO_ON)
#else // Management of Errors, reception/emission and informations indicators with RGB LED
# include <FastLED.h>
CRGB leds[FASTLED_IND_NUM_LEDS];
# define SetupIndicators() \
FastLED.addLeds<FASTLED_IND_TYPE, FASTLED_IND_DATA_GPIO>(leds, FASTLED_IND_NUM_LEDS); \
FastLED.setBrightness(20); /* Error, warning and infos display management*/
# define ErrorIndicatorON() \
leds[0] = CRGB::Red; \
FastLED.show()
# define ErrorIndicatorOFF() \
leds[0] = CRGB::Black; \
FastLED.show()
# define SendReceiveIndicatorON() \
leds[0] = CRGB::Blue; \
FastLED.show()
# define SendReceiveIndicatorOFF() \
leds[0] = CRGB::Black; \
FastLED.show()
# define InfoIndicatorON() \
leds[0] = CRGB::Green; \
FastLED.show()
# define InfoIndicatorOFF() \
leds[0] = CRGB::Black; \
FastLED.show()
#endif
#ifdef ESP8266
//# define TRIGGER_GPIO 14 // pin D5 as full reset button (long press >10s)
#elif ESP32
//# define TRIGGER_GPIO 0 // boot button as full reset button (long press >10s)
#endif
// VCC ------------D|-----------/\/\/\/\ ----------------- Arduino PIN
// LED Resistor 270-510R
/*----------------------------OTHER PARAMETERS-----------------------------*/
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
/*----------------------------USER PARAMETERS-----------------------------*/
#ifdef ZgatewaySRFB
# define SERIAL_BAUD 19200
#else
# ifndef SERIAL_BAUD
# define SERIAL_BAUD 115200
# endif
#endif
/*--------------MQTT general topics-----------------*/
// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
#define subjectMQTTtoX "/commands/#"
#define subjectMultiGTWKey "toMQTT"
#define subjectGTWSendKey "MQTTto"
#define subjectFWUpdate "firmware_update"
// key used for launching commands to the gateway
#define restartCmd "restart"
#define eraseCmd "erase"
#define statusCmd "status"
#ifndef valueAsATopic
# define valueAsATopic false // define true to integrate msg value into the subject when receiving
#endif
#if defined(ESP32)
# define JSON_MSG_BUFFER 768
# define SIGNAL_SIZE_UL_ULL uint64_t
# define STRTO_UL_ULL strtoull
#elif defined(ESP8266)
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 768 or higher it is causing unexpected behaviour on ESP8266
# define SIGNAL_SIZE_UL_ULL uint64_t
# define STRTO_UL_ULL strtoull
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 1024 or higher
# define SIGNAL_SIZE_UL_ULL uint64_t
# define STRTO_UL_ULL strtoul
#else // boards with smaller memory
# define JSON_MSG_BUFFER 64 // Json message max buffer size, don't put 1024 or higher
# define SIGNAL_SIZE_UL_ULL uint32_t
# define STRTO_UL_ULL strtoul
#endif
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation) || defined(ZgatewayRTL_433)
// variable to avoid duplicates
# ifndef time_avoid_duplicate
# define time_avoid_duplicate 3000 // if you want to avoid duplicate MQTT message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
# endif
#endif
#define TimeBetweenReadingSYS 120 // time between (s) system readings (like memory)
#define TimeLedON 1 // time LED are ON
#define InitialMQTTConnectionTimeout 10 // time estimated (s) before the board is connected to MQTT
#define subjectSYStoMQTT "/SYStoMQTT"
#define subjectMQTTtoSYSset "/commands/MQTTtoSYS/config"
/*-------------------DEFINE LOG LEVEL----------------------*/
#ifndef LOG_LEVEL
# define LOG_LEVEL LOG_LEVEL_NOTICE
#endif
/*-----------PLACEHOLDERS FOR OLED/LCD DISPLAY--------------*/
// The real definitions are in config_M5.h / config_HELTEC.h
#define displayPrint(...) // only print if not in low power mode
#define lpDisplayPrint(...) // print in low power mode
#endif
Reference in new issue View Git Blame Copy Permalink