Updates the NorthernMan54/rtl_433_ESP dependency from v0.5.0 to v0.5.1,
which guards vdata_make() against strdup(NULL) for DATA_FORMAT.
Co-authored-by: Claude <noreply@anthropic.com>
Bumps the precompiled framework-arduinoespressif32-libs bundle from 0.1.3
to 0.1.4, which builds the esp32 BT controller in BLE-only mode (classic
BR/EDR + A2DP/SPP/HFP dropped). OMG's BT stack is NimBLE (a BLE-only host)
and never uses classic Bluetooth, so it was unreachable dead weight.
Measured on a no-PSRAM Theengs Plug (esp32, NimBLE, MQTT over TLS):
- flash 89.5% -> 86.7% (-54 KB)
- runtime freemem +~10 KB: the dual-mode controller reserved heap for the
classic BR/EDR baseband + 2 classic ACL connections at
esp_bt_controller_init(); BLE-only skips it
- BLE scan/decode and GATT connect (BM2/BM6 battery reads, SwitchBot
control) validated working
esp32-arduino-lib-builder change: theengs/esp32-arduino-lib-builder
mem/esp32-ble-only-controller (in 0.1.4).
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The PlatformIO library registry can no longer resolve
SmartRC-CC1101-Driver-Lib@2.5.7:
Library Manager: Installing SmartRC-CC1101-Driver-Lib @ 2.5.7
Warning! Could not find the package with 'SmartRC-CC1101-Driver-Lib @ 2.5.7'
requirements for your system 'linux_x86_64'
This breaks every CC1101-based environment in the nightly build:
esp32dev-rtl_433, esp32dev-pilight-cc1101, esp32dev-multi_receiver,
esp32dev-somfy-cc1101, nodemcuv2-rf2-cc1101, and others fail with:
main/commonRF.cpp:30:14: fatal error: ELECHOUSE_CC1101_SRC_DRV.h: No such file
Switch to the upstream GitHub release URL, matching how other
removed-from-registry libs in this file are pinned (m5tough, stl,
shtc3, etc). The v2.5.7 tag still exists in the upstream repo.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Switch Ethernet RMII clock from GPIO16 to GPIO0 output mode,
freeing GPIO16 for PSRAM chip select (SPICS1) on WROVER-IE
- Enable PSRAM with QIO flash mode and cache workaround flags
- Add PHY pre-power support for ETH_CLOCK_GPIO0_IN mode
- Report PSRAM status and free memory in SYS MQTT topic
Requires Theengs lib-builder update: remove LIBTIME from IRAM
cache workaround (CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=n) to
free ~3.5KB IRAM for the -mfix-esp32-psram-cache-issue flag.
Tested on Theengs Bridge v1.1: 4MB PSRAM detected, Ethernet
100Mbps on GPIO0, BLE scanning nominal.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* An FSK version for esp32dev-rtl_433 has been added to handle the Bresser 5-in-1 weather station with a standard 868 MHz c1101
* Change platform and DGateway_Name
Enable the management of different connections at runtime with a set of certs for each.
Add parameters to the WiFi Manager onboarding, client certificates, and certificate validation
* First build with IDF, tested with esp32dev-ble only.
* Fix frameworks for non-esp32 boards
* Add blufi support.
* Adds an environment to use esp-idf and Arduino as a component to facilitate incorporating blufi for onboarding and configuration.
---------
Co-authored-by: h2zero <powellperalata@gmail.com>
• Bump Theengs Decoder to 1.6.7
• Conversion of prmac decoders to RMAC, for RMAC filtering of random MAC devices, until and if OpenMQTTGateway gets Identity MAC/IRK functionality.
•HA discovery lock class added
* [FSK] Add Lilygo Heltec environment with FSK modulation
Enable RTL_433 frequency and active receiver change with WebUI
Add FSK environment for Heltec and Lilygo
* [SYS] Configuration portal for Ethernet board
Enable Wifi Manager as a configuration portal for Ethernet boards, also leverage the Wifi Access point as a fallback connectivity method
Add link to the WebUI from HA and reduce key length
* Remove unnecessary environment
Now that one environment cans support wifi and ethernet, merge the 2
* [LORA] Capability to change LORA frequency and Add OLED
Merge of the 2 environments for TTGO V1
* Merge messages keys with upper level json
* Id as a sub topic
* Add display and state measures
* Add frequency configuration through WebUI
* Add parameters
* Add auto discovery
* Add node example for ttgo lora32 v1
* Add environments and fix scope
* Support for sync word as a byte
* Fix TX Power setting
* Add LoRa gateway description
* Add onlyknown filter
Update to rtl_433_ESP 0.3.0
Resolves issue with sx127x chipset and receiving higher frequencies
Includes support for receiving FSK signals, requires compiler directive OOK_MODULATION=false to switch to FSK mode
Adds unit of measure for rtl_433/battery_ok devices RTL_433_ESP Battery Auto Discovery Missing Unit of Measurement #1644
Updates value template for rtl_433/battery_ok in openHab mode
Resolves out of stack space crash lilygo-rtl_433 crash after chacon remote control button pressed #1655
* [DISC] Add runtime configuration for OpenHAB
Add an MQTT configurable system key "ohdiscovery" for OpenHAB auto discovery
* Docs and environments update
Description:
1 - Fix nextDisplayPage/nextWebUIPage sync with SSD1306
2 - Discovery message name is SS1306
3 - Stack size tuning - ARDUINO_LOOP_STACK_SIZE=9600
With this change, in your personal ESP32 platformio environments you need to change ${com-esp.build_flags} to ${com-esp32.build_flags} and ${com-esp.lib_deps} to ${com-esp32.lib_deps}
4 - On information page, fix module display
5 - Set OTA URL to String systemUrl = RELEASE_LINK + latestVersion + "/" + ENV_NAME + "-firmware.bin";
6 - Allow back level espressif32 framework support
* Add Adafruit NeoPixel library #defines
* Currently FastLED causes rapid reboots on ESP32C3 boards when OMG signals.
Onboard RGB LEDs can be adressed more reliably with the NeoPixel library.
Define RGB_INDICATORS=2 to use this addition.
* rebase fix: adapt to "Bump ESP32" changes in development
* Add build environments for the Espressiv ESP32-C3-DevKitC-02 board
* esp32c3-dev-c2-ble and esp32c3-dev-c2-ble-no-serial environments both
use the Adafruit NeoPixel library for the onboard RGB LED as FastLED
causes rapid reboots.
* Only occasional reboots of this board occure when serial output is not
read. The -no-serial version further improves stability.
* Add a build environment for the Espressiv ESP32-C3-DevKitC-02 board
* The esp32c3-dev-c2-ble offers a reasonable compromise between logging
and stability of OMG on this board.
