[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

* Update arduino core to 3.1.1

* Fix Blufi build

* Update arduinojson, fix build errors with idf

* Fix narrowing

* fix RF builds

* WIP-Convert ino files to cpp

* Fix pilight build

* Fix Somfy actuator build.

* Update esp32dev-rf partition

* Fix Weatherstation build

* Fix GFSunInverter build

* Fix esp32dev-ir build

* Fix ble-aws build

* Fix eth builds

* Fix m5Stack missing pins_arduino.h

* Fix build errors for M5 stack/tough, others are upstream issues.

* Fix RTL 433 build - remaining errors are from radolib

* Fix nodemcu build

* fix 2g builds

* Fix serial build

* Fix actuator on off builds

* Fix SSD1306 build - remaining errors are from radiolib

* Fix multiple definition of OTAserver_cert

* Fix nodemcu rf2 build

* Fix ADC builds

* Fix sensor builds

* Fix LORA builds

* Fix multi-receiver builds - remaining errors are in radiolib

* Fix fastled builds

* Fix theegns board builds

* Fix broker builds

* Update fastled - old version failed all-test build

* Fix RN8209 builds

* Fix max temp actuator builds

* Fix PWM builds

* Fix C37 sensor builds

* Fix HTU21 builds

* Fix INA266 builds

* Fix undefined variables in mqtt discovery

* Fix webui build

* Fix fastled invalid pin error

* Fix wifi manual setup builds

* Fix onewire/all-test build - bin too big error remaining

* Fix theengs plug build

* Fix rfbridge builds

* Fix blufi builds

* Fix undefined functions in serial

* Fix preprocessor definition checks

* Set IDF log level to erre

* Add delay in loop to prevent watchdog timeout

* Use xTaskCreateUniveral to support single core processors

* Remove old HTTPUpdate files - upsteam fixed.

* Cleanup and move common declarations to header file

* Use custom partiton table to fix builds where bin is too large

* Update M5StickC - fixs esp32-m5stick-c-ble build

* Revert to Arduino core 2.x for builds with incompatible libs

* Remove "Z" from file names and rename omg_common to TheengsCommon

* Fix gateway name when using MAC with new Arduino core

* Update IDF config to reduce loop task stack use

* Update esp-nimble-cpp version, corrects BLE uppercase ID's

* Update wifi manager to fix watchdog timeout error

platformio.ini

@@ -114,15 +114,15 @@ extra_configs =
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 [libraries]
-arduinojson = ArduinoJson@6.18.3
+arduinojson = ArduinoJson@6.18.5
 arduinolog = https://github.com/1technophile/Arduino-Log.git#f634509
 picomqtt = PicoMQTT@1.1.1
 rc-switch = https://github.com/1technophile/rc-switch.git#98537e9
 newremoteswitch = https://github.com/1technophile/NewRemoteSwitch.git#8eb980e
 ble = https://github.com/h2zero/NimBLE-Arduino.git#2.2.1
-irremoteesp = IRremoteESP8266@2.8.5
+irremoteesp = https://github.com/theengs/IRremoteESP8266#arduinov3
 lora = https://github.com/sandeepmistry/arduino-LoRa.git#f4a1d27
-esppilight = ESPiLight@0.17.0
+esppilight = https://github.com/theengs/ESPiLight#b9dd7a1
 rfWeatherStation = WeatherStationDataRx@0.3.1
 rfm69 = https://github.com/LowPowerLab/RFM69.git#2e915ea
 rfm69spi = https://github.com/lowpowerlab/spiflash.git#9c0c2b9
@@ -136,19 +136,19 @@ htu21 = SparkFun HTU21D Humidity and Temperature Sensor Breakout@1.1.3
 ahtx0 = Adafruit AHTX0
 ina226 = https://github.com/jarzebski/Arduino-INA226.git#968a684
 a6lib = https://github.com/h2zero/A6lib
-wifimanager32 = https://github.com/tzapu/WiFiManager.git#9f5981e
+wifimanager32 = https://github.com/h2zero/WiFiManager.git#1ac24f4
 wifimanager8266 = https://github.com/tzapu/WiFiManager.git#2.0.5-beta
 ethernet = Ethernet
 esp8266_mdns = esp8266_mdns
 wire = Wire
-fastled = fastled/FastLED@3.5.0
+fastled = fastled/FastLED@3.9.15
 adafruit_neopixel = adafruit/Adafruit NeoPixel@^1.11.0
-onewire = paulstoffregen/OneWire@2.3.7
+onewire = https://github.com/h2zero/OneWire#GPIO-fix
 dallastemperature = DallasTemperature
-m5stickc = M5StickC@0.2.0
-m5stickcp = https://github.com/m5stack/M5StickC-Plus.git#0.0.2
-m5stack = M5Stack@0.3.1
-m5tough = https://github.com/m5stack/M5Tough.git#b502416
+m5stickc = M5StickC@0.2.5
+m5stickcp = https://github.com/m5stack/M5StickC-Plus.git#0.1.1
+m5stack = M5Stack@0.4.6
+m5tough = https://github.com/m5stack/M5Tough.git#ccf49e1
 smartrc-cc1101-driver-lib = SmartRC-CC1101-Driver-Lib@2.5.7
 stl = https://github.com/mike-matera/ArduinoSTL.git#7411816
 shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library
@@ -176,7 +176,7 @@ monitor_speed = 115200
 
 [com]
 esp8266_platform = espressif8266@4.2.1
-esp32_platform = espressif32@6.1.0
+esp32_platform = https://github.com/pioarduino/platform-espressif32#53.03.11
 esp32_solo_platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.02.00/platform-espressif32.zip
 atmelavr_platform = atmelavr@3.3.0
 
@@ -223,4 +223,4 @@ lib_deps =
   ${libraries.ethernet}
 build_flags =
   ${env.build_flags}
-  '-DsimpleReceiving=false'
+  '-DsimpleReceiving=false'