Removal of openHAB specific MQTT discovery patch "ohdisc", as it is no longer required with openHAB 4.3 and later, and with openHAB before 4.3 MQTT discovery never was fully implemented anyway.
• SwitchBot Curtain clarification, as these commands work with all three - original, 2 and 3 - versions of the SwitchBot Curtain.
• Device tracker updates.
auto-discover Presence/Tracker timeout even when HASS presence is not active
Also inject an additional placeholder rssi key and value into the BM2 voltage connection message to avoid the message being registered as a device tracker AWAY
https://community.openmqttgateway.com/t/bm2-home-and-away/3315
• Bump Theengs Decoder to 1.6.7
• Conversion of prmac decoders to RMAC, for RMAC filtering of random MAC devices, until and if OpenMQTTGateway gets Identity MAC/IRK functionality.
•HA discovery lock class added
• renamed command displaymetric to displayMetric for consistency with reported displayMetric
• added WebUI to receivingMQTT to be able to receive commands
Avoid
[ 137][E][Preferences.cpp:483] getString(): nvs_get_str len fail: SSD1306Config NOT_FOUND
error during start-up when no save preferences have been found
* partial MAC in title
• Last three octets of MAC address in title to differentiate devices with the same model name.
• fixed memory leak
• process optimisation
* lcd to oled
lcd to oled renaming
* BLE Display - THB, THBX, PLANT, AIR, BATT, BODY
* SCALE
* BBQ
* Filter MS-CDP, GAEN and IBEACON
* Mopeka & Smart Dry
* ACEL
ACEL sensor, as most also have temp and hum, but no acceleration info display included so far.
* Only display when properties are present
Only display when properties are present, to avoid model only display for devices which require active scanning at a larger interval, e.g. Mi Band and similar.
* LilyGo-BLE environment
* BLE display relocated
BLE display relocated to have pubadvdata "type" in message, required for the different type display functions.
* Inverted idle logo
Back on white background start-up logo.
Inverted idle logo with random positioning.
* Idle Logo display default true
DISPLAY_IDLE_LOGO true as burn-in screens saver, especially fo the constant heading and line
* Display Brightness added
* SSD1306toMQTT / MQTTtoSSD1306
Additional "onstate" and "brightness" setting and regular display state reporting
Docs - separate Displays section
* Publishing/receiving inconsistencies
* General platformio.ini changes
General platformio.ini changes to allow for publishing/receiving settings to be defined in User_cofig.h instead of them only working if defined in the environments. Kept separate so far for discussion.
* Disable MQTTsetMQTT and MQTT_HTTPS_FW_UPDATE to allow OTA for Avatto Bakery IR
Trying to update my Avattos with the currently released 0.9.8 I found that OTA wasn't possible any longer as the build was now to large
0.9.8
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
this goes back to 0.9.7, where WiFi, MQTT and firmware update was introduced over MQTT commands
0.9.7
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
Going back to building 0.9.6 I was able to OTA update again with the much smaller build
0.9.6
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.7% (used 32512 bytes from 81920 bytes)
Flash: [==== ] 41.4% (used 396804 bytes from 958448 bytes)
Building 0.9.8 with the flags brings the build back to OTAable size
0.9.8 with
'-UMQTTsetMQTT'
'-UMQTT_HTTPS_FW_UPDATE'
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.9% (used 32684 bytes from 81920 bytes)
Flash: [==== ] 42.3% (used 405024 bytes from 958448 bytes)
Similar to the flag setting in [env:rfbridge]
I'm not even sure if MQTT_HTTPS_FW_UPDATE would even work on the Avatto, with the limited flash memory.
Should we also add
board_build.ldscript = eagle.flash.1m64.ld
as a default, as it's required for OTA updates on the Avattos as discussed in https://github.com/1technophile/OpenMQTTGateway/issues/763#issuecomment-698864712 ?
* Doc addition for restricted MQTT options
Doc addition for https://github.com/1technophile/OpenMQTTGateway/pull/1046 and https://github.com/1technophile/OpenMQTTGateway/pull/986
While playing with the new BLE READ/WRITE feature for my Playbulb Candles I found that writing was not possible for characteristics which are WriteWithoutResponse only.
I implemented this quick fix which might be useful for others with devices for which they want to write to WriteWithoutResponse characteristics.
Alternatively a more slective option could be possible for a future release, i.e. adding an additional WRITE tag like "ble_write_withoutresponse": true/false
DigiH