Florian
7c6e0ccf61
* esp32 init * RF gateway ok with ESP32 * correct IR gateway compilation errors and test RF2 ok * divide config per board type * update test file according user_config * differentiate variable type following IR libraries aka platforms * implement BLE beacons detection with ESP32 * Implement multitasking on BLE gateway * Library add and change core assignement * change core assignement for BLE * add mi flora value readings with ESP32 * adding some traces and removing unecessary comment * correct compilation error due to pin assignement * correct temperature float value and wrong mac adress rssi publishing * add esp32 to CI * correct esp32 ide retrieving * correcting paths * CI: correct architecture * libraries update (irremote) and overwrite ble library files
40 lines
1.6 KiB
C
40 lines
1.6 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files enables to set your parameter for the DHT11/22 sensor
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*----------------------------USER PARAMETERS-----------------------------*/
|
|
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
|
|
#define HUM1 "home/DHTtoMQTT/dht1/hum"
|
|
#define TEMP1 "home/DHTtoMQTT/dht1/temp"
|
|
#define dht_always true // if false when the current value for temp or hum is the same as previous one don't send it by MQTT
|
|
#define TimeBetweenReadingDHT 30000 // time between 2 DHT readings
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#if defined(ESP8266) || defined(ESP32)
|
|
#define DHT_RECEIVER_PIN D1 // you can put D5 if you don't use HCSR501 sensor and the RFM69
|
|
#else
|
|
#define DHT_RECEIVER_PIN 8
|
|
#endif
|
|
|