OpenMQTT-Gateway

0 Fork 0

T

e01b22695a [RF] Fix CC1101 initialization on boot with saved RF config (#2269 )

When a saved RF configuration exists in NVS, loadFromStorage() was loading
the config but not calling iRFReceiver.enable(), which meant initCC1101()
was never invoked during boot. This caused the CC1101 to not receive signals
until the user manually toggled the RF receiver via the WebUI.

This fix adds a reinitReceiver parameter to loadFromStorage() that controls
whether to disable/enable the receiver after loading config. By default it's
true (for boot-time initialization), but loadFromMessage() passes false to
avoid double initialization when loading config from MQTT messages.

Fixes #2264

Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Odyno <odyno@users.noreply.github.com>

🤖 Generated with [Claude Code](https://claude.ai/code)

Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>

2026-01-06 05:47:49 -06:00

.github

[CI] Configure Claude GitHub Actions to use Opus model (#2267 )

2026-01-05 07:58:05 -06:00

docs

[SYS] Update to Arduino 3.3.3 and use custom libs (#2248 )

2025-11-10 07:36:09 -06:00

examples

[LORA] Add water counter sensor with example (#1941 )

2024-05-05 14:45:33 -05:00

lib

[LED] Add LED STRIP macros and a third Addressable pin (#2063 )

2024-09-19 20:36:46 -05:00

main

[RF] Fix CC1101 initialization on boot with saved RF config (#2269 )

2026-01-06 05:47:49 -06:00

partitions

[BT] MQTT corruption fix (#2183 )

2025-05-16 22:15:57 +02:00

scripts

[DOC] Sort firmware dropdown lists alphabetically (#2258 )

2025-12-07 16:45:07 -06:00

.clang-format

Added clang-format (#623 )

2020-06-09 16:09:23 -05:00

.editorconfig

Added clang-format (#623 )

2020-06-09 16:09:23 -05:00

.gitignore

Refactor RF Configuration Management (#2245 )

2025-12-07 09:56:15 -06:00

.gitmodules

remove libraries as submodules

2018-04-29 21:41:37 +02:00

.gitpod.yml

[BUILD] Add gitpod to build the firmware (#1515 )

2023-03-09 08:55:05 -06:00

CLAUDE.md

[CI] Add Claude GitHub actions (#2266 )

2026-01-03 10:54:31 -06:00

CODE_OF_CONDUCT.md

Create CODE_OF_CONDUCT.md

2017-07-01 22:17:29 +02:00

CONTRIBUTING.md

Create CONTRIBUTING.md

2020-04-28 14:12:07 -05:00

environments.ini

[CI] Fix nightly build failures (#2257 )

2025-12-07 16:03:30 -06:00

LICENSE.txt

change to GPL 3

2017-06-02 22:11:14 +02:00

package-lock.json

[DOCS] Bump qs and express (#2265 )

2026-01-03 11:11:48 -06:00

package.json

[DOCS] Add sitemap (#1868 )

2024-01-16 09:32:47 -06:00

platformio.ini

[RF] Update to rtl_433_ESP 0.5.0

2025-12-07 10:16:22 -06:00

prod_env.ini.example

[SYS] Update to Arduino 3.3.3 and use custom libs (#2248 )

2025-11-10 07:36:09 -06:00

README.md

[BOARDS] Remove Arduino boards (#1929 )

2024-04-10 15:48:05 -05:00

sdkconfig.defaults

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177 )

2025-05-06 19:35:50 -05:00

README.md

OpenMQTTGateway aims to unify various technologies and protocols into a single firmware. This reduces the need for multiple physical bridges and streamlines diverse technologies under the widely-used MQTT protocol.

Documentation

The documentation is here

The reference sheet, with the list of all functions, pinouts is here

Upload

Upload OpenMQTTGateway directly from the upload page (no additional software required) or build your own configuration with PlatformIO.

Using OpenMQTTGateway ?

Support open-source development through sponsorship and gain exclusive access to our private forum. Your questions, issues, and feature requests will receive priority attention, plus you'll gain insider access to our roadmap.

Products powered by OpenMQTTGateway

Theengs Bridge, Bluetooth gateway (BLE) with external antenna

Theengs bridge is a powerfull BLE to MQTT gateway for over 100 sensors. Equipped with an Ethernet port, and external antenna, ensuring an enhanced range for your BLE sensors. It supports also WiFi connectivity.

Theengs Plug, Bluetooth gateway (BLE) gateway and Smart Plug

Theengs plug brings the following features:

BLE to MQTT gateway, tens of Bluetooth devices supported thanks to Theengs Decoder library. The plug uses an ESP32 acting as a BLE to Wifi gateway to scan, decode and forward the data of the nearby sensors,
Smart plug that can be controlled remotely,
Energy consumption monitoring,
Device tracker,
Presence detection (beta),
Local connectivity first.

Support the project by purchasing the Theengs bridge or the Theengs plug

Compatible items

List of supported devices, door/window sensors, PIR sensors, smoke detectors, weather stations...
List of compatible boards (Off the shelf or DIY) is available, RF Bridge, IR, BLE gateways...

Running on a computer If you want to use the BLE decoding capabilities of OpenMQTTGateway with a Raspberry Pi, Windows or Unix PC you can now leverage Theengs Gateway.

List of compatible components to build your gateway, DHT, RF, IR emitters and receivers...

Compatible controllers, saas or software

Contributors ✨

Thanks goes to these wonderful people who helped OpenMQTTGateway on Github and to the users contributions into the community.

Support

For Questions or Support please don't open an issue, first go to the docs and if you don't find your answer there, you can post your question in the community forum

Help

If you like the project and/or used it please consider supporting it! It can be done in different ways:

Helping other users in the community
Contribute to the code or the documentation
Buy devices, boards or parts from the compatible web site, the devices and parts linked use affiliated links.
Donate or sponsor the project developers
Make a video or a blog article about what you have done with OpenMQTTGateway and share it to the community