Leon Kiefer
b5527d2e7b
* added support for secure TLS connections on ESP32 and ESP8266 close #101 * added TLS test builds * added documentation for TLS fixed some some issues in the documentation * added documentation for error code=54
38 lines
2.0 KiB
Markdown
38 lines
2.0 KiB
Markdown
# Upload Binaries
|
|
This section is useful if you want to directly flash your ESP from your desktop. Once flashed you can change wifi and broker settings.
|
|
Nevertheless you will not be able to change advanced parameters, if you want to do so refer to [Upload from PlatformIO][pio] section.
|
|
|
|
Download the binary corresponding to your board and gateway [here](https://github.com/1technophile/OpenMQTTGateway/releases) from github and uncompress it.
|
|
|
|
## ESP32
|
|
* Download the bootloader [here](https://github.com/espressif/arduino-esp32/raw/master/tools/sdk/bin/bootloader_dio_80m.bin)
|
|
* Download the boot_app0 from [here](https://github.com/espressif/arduino-esp32/raw/master/tools/partitions/boot_app0.bin)
|
|
* Download the flash tool utility from espressif:
|
|
https://www.espressif.com/en/products/hardware/esp32/resources
|
|
* Uncompress the package
|
|
* Execute `flash_download_tools`
|
|
* Choose ESP32 DownloadTool
|
|
* Set the files and the address as below:
|
|
|
|
And set the parameters used by arduino IDE, we are able to upload to ESP32 a binary file containing OpenMQTTGateway.
|
|
* Set the config as above
|
|
* Connect your ESP32 board and select the COM port
|
|
* Click on start
|
|
The upload details appears in the rear shell windows, you can see also the progress bar changing
|
|
* Once done the flash tool display "FINISH" like below
|
|
|
|
|
|
## ESP8266
|
|
* Download the NodeMCU Py Flasher tool :
|
|
https://github.com/marcelstoer/nodemcu-pyflasher/releases
|
|
* Execute `NodeMCU-PyFlasher`
|
|
* Set the files and parameters as below:
|
|
|
|
* Connect your board and select the COM port
|
|
* Click on *FlashNodeMCU*
|
|
The upload details appears.
|
|
|
|
With an ESP if you did not set your network and mqtt parameters manually you can now open the [web portal configuration](portal.md).
|
|
|
|
Note that to reset the wifi and mqtt settings you can check *yes, wipes all data*
|