Florian
db8df1ddf6
Rename set commands to config correct json buffer size and gateway name replace state to cmd replace set by config add restart and erase command add unicity to gateway command switches BLE devices shouldn't be child of the gateway make the BTtoMQTT topic consistent with other definitions
78 lines
3.0 KiB
C
78 lines
3.0 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files enables to set your parameter for the bluetooth low energy gateway (beacons detection)
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#ifndef config_BT_h
|
|
#define config_BT_h
|
|
|
|
extern void setupBT();
|
|
extern bool BTtoMQTT();
|
|
extern void MQTTtoBT(char * topicOri, JsonObject& RFdata);
|
|
/*----------------------BT topics & parameters-------------------------*/
|
|
#define subjectBTtoMQTT "/BTtoMQTT"
|
|
#define subjectMQTTtoBTset "/commands/MQTTtoBT/config"
|
|
#define TimeBtw_Read 55555 //define default time between 2 scans
|
|
#define MinimumRSSI -100 //default minimum rssi value, all the devices below -90 will not be reported
|
|
#define Scan_duration 10 //define the time for a scan --WARNING-- changing this value can lead to instability on ESP32
|
|
#define HM-10
|
|
//#define HM-11 // uncomment this line if you use HM-11 and comment the line above
|
|
//#define HM_BLUE_LED_STOP true //uncomment to stop the blue led light of HM1X
|
|
#define BLEdelimiter "4f4b2b444953413a"
|
|
#define pubBLEServiceData true // comment if you don't want to publish service data (in case you are having too heavy service data) https://github.com/1technophile/OpenMQTTGateway/issues/318#issuecomment-446064707
|
|
|
|
/*-------------------HOME ASSISTANT ROOM PRESENCE ----------------------*/
|
|
// if not commented Home presence integration with HOME ASSISTANT is activated
|
|
#define subjectHomePresence "home_presence/" // will send Home Assistant room presence message to this topic (first part is same for all rooms, second is room name)
|
|
|
|
unsigned int BLEinterval ; //time between 2 scans
|
|
int Minrssi ; //minimum rssi value
|
|
|
|
struct BLEdevice{
|
|
char macAdr[13];
|
|
bool isDisc;
|
|
bool isWhtL;
|
|
bool isBlkL;
|
|
};
|
|
|
|
struct decompose{
|
|
char subject[4];
|
|
int start;
|
|
int len;
|
|
bool reverse;
|
|
char extract[60];
|
|
};
|
|
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#ifdef ESP8266
|
|
#define BT_RX 13 //D7 ESP8266 RX connect HM-10 or 11 TX
|
|
#define BT_TX 12 //D6 ESP8266 TX connect HM-10 or 11 RX
|
|
#elif defined(ESP32)
|
|
#define BT_RX 18 // not tested
|
|
#define BT_TX 19 // not tested
|
|
#else
|
|
#define BT_RX 5 //arduino RX connect HM-10 or 11 TX
|
|
#define BT_TX 6 //arduino TX connect HM-10 or 11 RX
|
|
#endif
|
|
|
|
#endif |