Leon Kiefer
b5527d2e7b
* added support for secure TLS connections on ESP32 and ESP8266 close #101 * added TLS test builds * added documentation for TLS fixed some some issues in the documentation * added documentation for error code=54
31 lines
2.0 KiB
Markdown
31 lines
2.0 KiB
Markdown
# Upload with Arduino IDE
|
|
|
|
* First download the last version of the Arduino IDE from the arduino [website](https://www.arduino.cc/en/Main/Software)
|
|
* Add ESP32 boards by following this [tutorial](https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md)
|
|
* Add ESP8266 boards by following this [tutorial](https://github.com/esp8266/Arduino#installing-with-boards-manager)
|
|
* Download OpenMQTTGateway code (OpenMQTTGateway_sources.zip) from the [release page](https://github.com/1technophile/OpenMQTTGateway/releases) and unzip it
|
|
* Download the libraries package corresponding to your board and module wished into the same page (example esp32-m5stick-c-ble-libraries.zip)
|
|
* Unzip the libraries into your arduino libraries folder (example D:/Users/XXXX/Documents/Arduino/libraries)
|
|
* If necessary replace the spaces into each library folder by _: example rename “ESP32 BLE Arduino” folder to “ESP32_BLE_Arduino”
|
|
* Open the file main.ino from OpenMQTTGateway/main folder with the arduino IDE
|
|
* Change the settings and the desired gateways into User_config.h (uncomment the modules you want)
|
|
|
|
*Example for the use of RF gateway*
|
|
```cpp
|
|
#define ZgatewayRF "RF" //ESP8266, Arduino, ESP32
|
|
//#define ZgatewayIR "IR" //ESP8266, Arduino, Sonoff RF Bridge
|
|
//#define ZgatewayLORA "LORA" //ESP8266, Arduino, ESP32
|
|
//#define ZgatewayPilight "Pilight" //ESP8266, Arduino, ESP32
|
|
//#define ZgatewayBT "BT" //ESP8266, ESP32
|
|
```
|
|
|
|
* Change the pins or parameters corresponding to the modules choosen, for RF you can change the pins into config_RF.h
|
|
* Choose the board on the Arduino IDE
|
|
* Select the port corresponding to the board
|
|
* Note that for using BLE on ESP32 you will need to select *Minimal SPIFFS* into Tools->Partition Scheme
|
|
* Open the serial monitor and set 115200 bauds
|
|
* Upload ➡️
|
|
* You should see the logs into the serial monitor
|
|
|
|
With an ESP if you did not set your network and mqtt parameters manually you can now open the [web portal configuration](portal.md).
|