Northern Man 9546f43cd6 Behaviour when MQTT and/or Wifi is not available (#1126) ...

* Behaviour when MQTT and/or Wifi is not available

I was looking into why all my OpenMQTTGateway devices were not responding after a recent power failure and am speculating that the ESP32 was able to restart faster than my Wifi and MQTT Server was able to restart and resume operations.  And was thinking that a generic ESP.restart may be a reasonable approach with repeated Wifi and/or MQTT connection failures.

As mentioned here https://community.openmqttgateway.com/t/behaviour-when-mqtt-and-or-wifi-is-not-available/1747

Added new variable maxRetryWatchDog, which is the maximum number of mqtt or wifi connection attempts before restarting gateway device.

2022-01-17 16:16:43 -06:00

..

config_2G.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_ADC.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_AHTx0.h

Add AHTx0 Sensor (AHT10 and AHT20) (#687)

2020-07-04 09:40:06 -05:00

config_BH1750.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_BME280.h

Support for BME280 Temperature Correction (#1062)

2021-08-16 19:35:02 -05:00

config_BT.h

Discovery with theengs decoder (#1106)

2021-12-11 11:54:08 -06:00

config_DHT.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_DS1820.h

Fix DS18B20 not working properly (#1121)

2022-01-02 18:15:43 -06:00

config_FASTLED.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_GFSunInverter.h

GridFree SUN-2000G (#926)

2021-04-23 20:40:09 -05:00

config_GPIOInput.h

Allow inversion of input GPIO (#997)

2021-06-26 09:31:05 -05:00

config_GPIOKeyCode.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_HCSR04.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_HCSR501.h

Add ability to inverse notify PIR LED (#765)

2020-09-22 13:04:29 -05:00

config_HTU21.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_INA226.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_IR.h

irremote esp8266 bump to 2.7.15 (#892)

2021-03-11 15:53:28 -06:00

config_LORA.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_M5.h

Add board M5Stickc Plus (#828)

2020-12-06 12:06:50 -06:00

config_mqttDiscovery.h

Filter discovery messages against HASS classes list (#1127)

2022-01-11 20:24:09 -06:00

config_ONOFF.h

Adding low_pulse (#1120)

2022-01-01 19:47:23 -06:00

config_PWM.h

Add new actuator : PWM controller (#737)

2020-09-02 11:17:36 -05:00

config_RF.h

only restore an active receiver if it is available (#1115)

2021-12-20 19:36:13 -06:00

config_RFM69.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_RS232.h

Basic RS232 Communication (#780)

2020-10-19 13:48:58 -05:00

config_SHTC3.h

Feature/add shtc3 (#843)

2021-01-05 19:17:39 -06:00

config_Somfy.h

added ZactuatorSomfy (#816)

2020-12-13 12:46:10 -06:00

config_SRFB.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_TSL2561.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_WeatherStation.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

main.ino

Behaviour when MQTT and/or Wifi is not available (#1126)

2022-01-17 16:16:43 -06:00

User_config.h

Behaviour when MQTT and/or Wifi is not available (#1126)

2022-01-17 16:16:43 -06:00

ZactuatorFASTLED.ino

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

ZactuatorONOFF.ino

Adding low_pulse (#1120)

2022-01-01 19:47:23 -06:00

ZactuatorPWM.ino

Discovery with theengs decoder (#1106)

2021-12-11 11:54:08 -06:00

ZactuatorSomfy.ino

added somfy repeat option (#957)

2021-05-24 15:09:18 -05:00

ZboardM5.ino

Resolve issue with wifi reconnection on M5Stack boards (#907)

2021-03-27 09:26:15 -05:00

Zgateway2G.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayBLEConnect.h

Add miflora battery (#992)

2021-06-24 20:11:50 -05:00

ZgatewayBLEConnect.ino

Discovery with theengs decoder (#1106)

2021-12-11 11:54:08 -06:00

ZgatewayBT.ino

Correct log display for std::string (#1111)

2021-12-13 18:50:40 -06:00

ZgatewayGFSunInverter.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayIR.ino

Fix ir protocol name not correctly displayed on esp8266 (#1129)

2022-01-14 17:46:19 -06:00

ZgatewayLORA.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayPilight.ino

Save currently active receiver and restore on reboot (#1091)

2021-10-29 16:53:05 -05:00

ZgatewayRF2.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZgatewayRF.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZgatewayRFM69.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayRS232.ino

Basic RS232 Communication (#780)

2020-10-19 13:48:58 -05:00

ZgatewayRTL_433.ino

Save currently active receiver and restore on reboot (#1091)

2021-10-29 16:53:05 -05:00

ZgatewaySRFB.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayWeatherStation.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZmqttDiscovery.ino

Filter discovery messages against HASS classes list (#1127)

2022-01-11 20:24:09 -06:00

ZsensorADC.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorAHTx0.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorBH1750.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorBME280.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorDHT.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorDS1820.ino

Fix DS18B20 not working properly (#1121)

2022-01-02 18:15:43 -06:00

ZsensorGPIOInput.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorGPIOKeyCode.ino

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

ZsensorHCSR04.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorHCSR501.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorHTU21.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorINA226.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorSHTC3.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorTSL2561.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

zzHTTPUpdate.cpp

Support Home Assistant Long-term Statistics #1087 (#1088)

2021-10-14 18:46:13 -05:00

zzHTTPUpdate.h

Trigger firmware update via MQTT (ESP Only). (#953)

2021-05-23 16:38:52 -05:00