chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
8d793a8b5066ed4f26cba69d2c367680dc74c0aa
OpenMQTT-Gateway/main
T
History
h2zero 8b40b68081 Use write with response non-response write is not available. (#1136) 
If the BLE characteristic does not have write without response available this will default to using write with response.
2022-01-18 16:52:03 -06:00
..
config_2G.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_ADC.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_AHTx0.h
Add AHTx0 Sensor (AHT10 and AHT20) (#687)
2020-07-04 09:40:06 -05:00
config_BH1750.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_BME280.h
Support for BME280 Temperature Correction (#1062)
2021-08-16 19:35:02 -05:00
config_BT.h
Discovery with theengs decoder (#1106)
2021-12-11 11:54:08 -06:00
config_DHT.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_DS1820.h
Fix DS18B20 not working properly (#1121)
2022-01-02 18:15:43 -06:00
config_FASTLED.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_GFSunInverter.h
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
config_GPIOInput.h
Allow inversion of input GPIO (#997)
2021-06-26 09:31:05 -05:00
config_GPIOKeyCode.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR04.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR501.h
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
config_HTU21.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_INA226.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_IR.h
irremote esp8266 bump to 2.7.15 (#892)
2021-03-11 15:53:28 -06:00
config_LORA.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_M5.h
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
config_mqttDiscovery.h
Filter discovery messages against HASS classes list (#1127)
2022-01-11 20:24:09 -06:00
config_ONOFF.h
Adding low_pulse (#1120)
2022-01-01 19:47:23 -06:00
config_PWM.h
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
config_RF.h
only restore an active receiver if it is available (#1115)
2021-12-20 19:36:13 -06:00
config_RFM69.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_RS232.h
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
config_SHTC3.h
Feature/add shtc3 (#843)
2021-01-05 19:17:39 -06:00
config_Somfy.h
added ZactuatorSomfy (#816)
2020-12-13 12:46:10 -06:00
config_SRFB.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_TSL2561.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_WeatherStation.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
main.ino
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
User_config.h
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
ZactuatorFASTLED.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZactuatorONOFF.ino
Adding low_pulse (#1120)
2022-01-01 19:47:23 -06:00
ZactuatorPWM.ino
Discovery with theengs decoder (#1106)
2021-12-11 11:54:08 -06:00
ZactuatorSomfy.ino
added somfy repeat option (#957)
2021-05-24 15:09:18 -05:00
ZboardM5.ino
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
Zgateway2G.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayBLEConnect.h
Add miflora battery (#992)
2021-06-24 20:11:50 -05:00
ZgatewayBLEConnect.ino
Use write with response non-response write is not available. (#1136)
2022-01-18 16:52:03 -06:00
ZgatewayBT.ino
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
ZgatewayGFSunInverter.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayIR.ino
Fix ir protocol name not correctly displayed on esp8266 (#1129)
2022-01-14 17:46:19 -06:00
ZgatewayLORA.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayPilight.ino
Save currently active receiver and restore on reboot (#1091)
2021-10-29 16:53:05 -05:00
ZgatewayRF2.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZgatewayRF.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZgatewayRFM69.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayRS232.ino
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
ZgatewayRTL_433.ino
Save currently active receiver and restore on reboot (#1091)
2021-10-29 16:53:05 -05:00
ZgatewaySRFB.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayWeatherStation.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZmqttDiscovery.ino
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
ZsensorADC.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorAHTx0.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBH1750.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBME280.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDHT.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDS1820.ino
Fix DS18B20 not working properly (#1121)
2022-01-02 18:15:43 -06:00
ZsensorGPIOInput.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorGPIOKeyCode.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR04.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorHCSR501.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorHTU21.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorINA226.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorSHTC3.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorTSL2561.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
zzHTTPUpdate.cpp
Support Home Assistant Long-term Statistics #1087 (#1088)
2021-10-14 18:46:13 -05:00
zzHTTPUpdate.h
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00