chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
8bc65d62dcb2d48dc339c160233f5ba634a2ef38
OpenMQTT-Gateway/main
T
History
Northern Man 8bc65d62dc Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291) 
The main features of the upgrade to 0.1.3 of rtl_433_ESP are

1 - Change Transceiver Library to RadioLib

2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).

3 - Added automatic calibration of the RSSI Signal detection Threshold

4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task

5 - Moved received signal decoding to a ESP32 Task

6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.

7 - Multi Receiver support has been validated with RF, RF2 and PiLight
2022-10-20 11:14:45 -05:00
..
config_2G.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_ADC.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_AHTx0.h
Add AHTx0 Sensor (AHT10 and AHT20) (#687)
2020-07-04 09:40:06 -05:00
config_BH1750.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_BME280.h
Support for BME280 Temperature Correction (#1062)
2021-08-16 19:35:02 -05:00
config_BT.h
Modify new BT config using MQTT (#1259)
2022-09-03 15:08:07 -05:00
config_DHT.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_DS1820.h
Fix DS18B20 not working properly (#1121)
2022-01-02 18:15:43 -06:00
config_FASTLED.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_GFSunInverter.h
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
config_GPIOInput.h
Allow inversion of input GPIO (#997)
2021-06-26 09:31:05 -05:00
config_GPIOKeyCode.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR04.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR501.h
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
config_HELTEC.h
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
config_HTU21.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_INA226.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_IR.h
MQTT-MAC-IP-mDNS (#1245)
2022-07-19 12:10:51 -05:00
config_LORA.h
Lora band define (#1231)
2022-06-29 12:14:18 -05:00
config_M5.h
Heltec SSD1306 Display Support (#1283)
2022-10-13 21:17:25 -05:00
config_mqttDiscovery.h
Re-publish discovery topics on re-connect (via cfg, disabled by default) (#1274)
2022-09-26 15:49:02 -05:00
config_ONOFF.h
Adding low_pulse (#1120)
2022-01-01 19:47:23 -06:00
config_PWM.h
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
config_RF.h
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
config_RFM69.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_RS232.h
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
config_SHTC3.h
Feature/add shtc3 (#843)
2021-01-05 19:17:39 -06:00
config_Somfy.h
added ZactuatorSomfy (#816)
2020-12-13 12:46:10 -06:00
config_SRFB.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_TSL2561.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_WeatherStation.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
main.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
User_config.h
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZactuatorFASTLED.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorONOFF.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorPWM.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorSomfy.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZboardHeltec.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZboardM5.ino
Add M5Tough board (#1135)
2022-01-17 19:22:26 -06:00
Zgateway2G.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayBLEConnect.h
Add Switchbot support and discovery. (#995)
2022-04-30 09:16:06 -05:00
ZgatewayBLEConnect.ino
Add Switchbot support and discovery. (#995)
2022-04-30 09:16:06 -05:00
ZgatewayBT.ino
Remove HM10 support (#1282)
2022-10-10 20:34:12 -05:00
ZgatewayGFSunInverter.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayIR.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayLORA.ino
Configure LoRA gateway parameters at startup (#1234)
2022-07-13 23:49:31 +02:00
ZgatewayPilight.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF2.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRFM69.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayRS232.ino
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
ZgatewayRTL_433.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewaySRFB.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayWeatherStation.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZmqttDiscovery.ino
Fix missing lowpowermode attribute (#1281)
2022-10-10 18:30:46 -05:00
ZsensorADC.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorAHTx0.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBH1750.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBME280.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDHT.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDS1820.ino
Fix DS18B20 not working properly (#1121)
2022-01-02 18:15:43 -06:00
ZsensorGPIOInput.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorGPIOKeyCode.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR04.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorHCSR501.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorHTU21.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorINA226.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorSHTC3.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorTSL2561.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
zzHTTPUpdate.cpp
Support Home Assistant Long-term Statistics #1087 (#1088)
2021-10-14 18:46:13 -05:00
zzHTTPUpdate.h
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00