chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
85a4fd6e15ef0b21189cabf4e9c99247102740e4
OpenMQTT-Gateway/main
T
History
Florian 85a4fd6e15 Remove auto discovery switch (#1365) 
I don't think there is usage for such a switch into HA, if you see it, auto discovery was already activated and all the entities created, so you will have to go to the mqtt client to remove the retained messages.
If you don't want auto discovery as an HA user you would have to go to the mqtt client to send the discovery message deactivation.
So either way as a HA user you have to go to a client.
And as people not wanting to use auto discovery with HA are the people that are not using HA this switch as a little value.
2022-12-19 08:51:36 -06:00
..
config_2G.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_ADC.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_AHTx0.h
Add AHTx0 Sensor (AHT10 and AHT20) (#687)
2020-07-04 09:40:06 -05:00
config_BH1750.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_BME280.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_BT.h
[BLE] Add dynamic active scan runtime setting (#1360)
2022-12-14 17:03:34 -06:00
config_DHT.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_DS1820.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_FASTLED.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_GFSunInverter.h
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
config_GPIOInput.h
Allow inversion of input GPIO (#997)
2021-06-26 09:31:05 -05:00
config_GPIOKeyCode.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR04.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR501.h
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
config_HELTEC.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_HTU21.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_INA226.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_IR.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_LM75.h
Support LM75 temperature sensor (#1327)
2022-11-28 11:31:46 -06:00
config_LORA.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_M5.h
Add the possibility to set LOG_LEVEL_LCD and LOG_TO_LCD for M5 boards from PIO (#1358)
2022-12-12 15:41:48 -06:00
config_mqttDiscovery.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_ONOFF.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_PWM.h
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
config_RF.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_RFM69.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_RN8209.h
RN8209 energy sensor support with watt, voltage and current. (#1337)
2022-11-29 18:41:47 -06:00
config_RS232.h
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
config_SHTC3.h
Feature/add shtc3 (#843)
2021-01-05 19:17:39 -06:00
config_Somfy.h
added ZactuatorSomfy (#816)
2020-12-13 12:46:10 -06:00
config_SRFB.h
Small typo fixes (#1359)
2022-12-12 22:58:51 +01:00
config_TSL2561.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_WeatherStation.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
main.ino
Add BMP280 support, compiler directive support for oversampling (#1344)
2022-12-05 09:51:45 -06:00
User_config.h
Added Thingpulse ESP32 gateways (#1369)
2022-12-16 21:38:13 -06:00
ZactuatorFASTLED.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorONOFF.ino
Enable to keep actuator on off state in case of restart (#1334)
2022-11-28 20:28:40 -06:00
ZactuatorPWM.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZactuatorSomfy.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZboardHeltec.ino
Defensive code for Heltec Display (#1296)
2022-10-23 13:36:59 -05:00
ZboardM5.ino
Add RGB Led management for errors, infos, and send receive events (#1320)
2022-11-16 12:58:22 -06:00
Zgateway2G.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayBLEConnect.h
Add Switchbot support and discovery. (#995)
2022-04-30 09:16:06 -05:00
ZgatewayBLEConnect.ino
Add Switchbot support and discovery. (#995)
2022-04-30 09:16:06 -05:00
ZgatewayBT.ino
[HA discovery] Save the BLE settings and change switch to optimistic false (#1364)
2022-12-19 08:44:14 -06:00
ZgatewayGFSunInverter.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZgatewayIR.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayLORA.ino
Configure LoRA gateway parameters at startup (#1234)
2022-07-13 23:49:31 +02:00
ZgatewayPilight.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF2.ino
Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)
2022-10-20 11:14:45 -05:00
ZgatewayRF.ino
fix rf gateway f strings (#1313)
2022-11-07 10:30:51 -06:00
ZgatewayRFM69.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayRS232.ino
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
ZgatewayRTL_433.ino
Update Arduino core and BLE/WiFiManager libs. (#1310)
2022-11-13 12:35:18 -06:00
ZgatewaySRFB.ino
Publishing/receiving inconsistencies fix (#1229)
2022-07-01 07:17:02 -05:00
ZgatewayWeatherStation.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZmqttDiscovery.ino
Remove auto discovery switch (#1365)
2022-12-19 08:51:36 -06:00
ZsensorADC.ino
Adc bugfix (#1328)
2022-11-28 11:35:11 -06:00
ZsensorAHTx0.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBH1750.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorBME280.ino
Add BMP280 support, compiler directive support for oversampling (#1344)
2022-12-05 09:51:45 -06:00
ZsensorDHT.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorDS1820.ino
fix pub of res field (#1311)
2022-11-03 07:40:51 -05:00
ZsensorGPIOInput.ino
Improve reset mechanism when MQTT is not connected (#1338)
2022-11-30 14:27:27 -06:00
ZsensorGPIOKeyCode.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR04.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorHCSR501.ino
Generalize the use of JSON_MSG_BUFFER (#1114)
2021-12-20 19:37:06 -06:00
ZsensorHTU21.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorINA226.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorLM75.ino
Support LM75 temperature sensor (#1327)
2022-11-28 11:31:46 -06:00
ZsensorRN8209.ino
RN8209 energy sensor support with watt, voltage and current. (#1337)
2022-11-29 18:41:47 -06:00
ZsensorSHTC3.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
ZsensorTSL2561.ino
Update to use ArduinoJson 6+ (#1071)
2021-09-01 19:18:19 -05:00
zzHTTPUpdate.cpp
Support Home Assistant Long-term Statistics #1087 (#1088)
2021-10-14 18:46:13 -05:00
zzHTTPUpdate.h
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00