chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
83b8d88c0fd8825a5a982d3f7c7fae20e8df7804
OpenMQTT-Gateway/main
T
History
h2zero 5e11690b69 Allow trigger gpio and input gpio to be the same pin. 
This will provide the expected funtionality for the reset trigger when the button is pressed for more than 10 seconds.
Also allows the same pin to be used as an actuator/relay trigger if pressed for less than 10 seconds.
2021-07-09 21:52:40 -05:00
..
config_2G.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_ADC.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_AHTx0.h
Add AHTx0 Sensor (AHT10 and AHT20) (#687)
2020-07-04 09:40:06 -05:00
config_BH1750.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_BME280.h
Use correct SDA+SCL pins (#996)
2021-06-24 19:13:16 -05:00
config_BT.h
Add support for Mokosmart beacons. (#1003)
2021-06-30 22:16:29 -05:00
config_DHT.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_DS1820.h
[BREAKING] remove tem key (#883)
2021-03-03 18:38:37 -06:00
config_FASTLED.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_GFSunInverter.h
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
config_GPIOInput.h
Allow inversion of input GPIO (#997)
2021-06-26 09:31:05 -05:00
config_GPIOKeyCode.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR04.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
config_HCSR501.h
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
config_HTU21.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_INA226.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_IR.h
irremote esp8266 bump to 2.7.15 (#892)
2021-03-11 15:53:28 -06:00
config_LORA.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_M5.h
Add board M5Stickc Plus (#828)
2020-12-06 12:06:50 -06:00
config_mqttDiscovery.h
Add Eddystone TLM BLE protocol (#972)
2021-06-08 17:53:58 -05:00
config_ONOFF.h
Allow trigger gpio and input gpio to be the same pin.
2021-07-09 21:52:40 -05:00
config_PWM.h
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
config_RF.h
Active Receiver Switching (#936)
2021-05-10 19:36:25 -05:00
config_RFM69.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_RS232.h
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
config_SHTC3.h
Feature/add shtc3 (#843)
2021-01-05 19:17:39 -06:00
config_Somfy.h
added ZactuatorSomfy (#816)
2020-12-13 12:46:10 -06:00
config_SRFB.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_TSL2561.h
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
config_WeatherStation.h
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
main.ino
Allow trigger gpio and input gpio to be the same pin.
2021-07-09 21:52:40 -05:00
User_config.h
Bugfix: switching brokers with self signed certs. (#1007)
2021-07-05 19:40:40 -05:00
ZactuatorFASTLED.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZactuatorONOFF.ino
Add triggering of actuator on/off state by button press.
2021-07-09 21:52:40 -05:00
ZactuatorPWM.ino
Add new actuator : PWM controller (#737)
2020-09-02 11:17:36 -05:00
ZactuatorSomfy.ino
added somfy repeat option (#957)
2021-05-24 15:09:18 -05:00
ZboardM5.ino
Resolve issue with wifi reconnection on M5Stack boards (#907)
2021-03-27 09:26:15 -05:00
Zgateway2G.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZgatewayBLEConnect.h
Add miflora battery (#992)
2021-06-24 20:11:50 -05:00
ZgatewayBLEConnect.ino
Add miflora battery (#992)
2021-06-24 20:11:50 -05:00
ZgatewayBT.ino
Bugfix: switching brokers with self signed certs. (#1007)
2021-07-05 19:40:40 -05:00
ZgatewayGFSunInverter.ino
GridFree SUN-2000G (#926)
2021-04-23 20:40:09 -05:00
ZgatewayIR.ino
irremote esp8266 bump to 2.7.15 (#892)
2021-03-11 15:53:28 -06:00
ZgatewayLORA.ino
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
ZgatewayPilight.ino
Fix missing gateway name in discovery. (#982)
2021-06-11 15:32:23 -05:00
ZgatewayRF2.ino
Fix missing gateway name in discovery. (#982)
2021-06-11 15:32:23 -05:00
ZgatewayRF.ino
Fix missing gateway name in discovery. (#982)
2021-06-11 15:32:23 -05:00
ZgatewayRFM69.ino
Platfomio libraries definition update (#694)
2020-07-08 10:42:08 -05:00
ZgatewayRS232.ino
Basic RS232 Communication (#780)
2020-10-19 13:48:58 -05:00
ZgatewayRTL_433.ino
Fix missing gateway name in discovery. (#982)
2021-06-11 15:32:23 -05:00
ZgatewaySRFB.ino
Srfb bugs (#807)
2020-11-28 17:16:15 -06:00
ZgatewayWeatherStation.ino
[BREAKING] remove tem key (#883)
2021-03-03 18:38:37 -06:00
ZmqttDiscovery.ino
Allow inversion of input GPIO (#997)
2021-06-26 09:31:05 -05:00
ZsensorADC.ino
Added TTGO-T-Beam board + option to send ADC values in volt (#863)
2021-02-06 12:47:52 -06:00
ZsensorAHTx0.ino
Standardize MQTTDiscovery Temp Keys [deprecate tem key] (#703)
2020-07-24 10:10:44 -05:00
ZsensorBH1750.ino
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
ZsensorBME280.ino
Fix BME280 (#962)
2021-05-30 11:34:15 -05:00
ZsensorDHT.ino
[BREAKING] remove tem key (#883)
2021-03-03 18:38:37 -06:00
ZsensorDS1820.ino
[BREAKING] remove tem key (#883)
2021-03-03 18:38:37 -06:00
ZsensorGPIOInput.ino
Allow trigger gpio and input gpio to be the same pin.
2021-07-09 21:52:40 -05:00
ZsensorGPIOKeyCode.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR04.ino
Replace pin by gpio (#631)
2020-06-13 20:04:36 -05:00
ZsensorHCSR501.ino
Add ability to inverse notify PIR LED (#765)
2020-09-22 13:04:29 -05:00
ZsensorHTU21.ino
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
ZsensorINA226.ino
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
ZsensorSHTC3.ino
[BREAKING] remove tem key (#883)
2021-03-03 18:38:37 -06:00
ZsensorTSL2561.ino
Added clang-format (#623)
2020-06-09 16:09:23 -05:00
zzHTTPUpdate.cpp
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00
zzHTTPUpdate.h
Trigger firmware update via MQTT (ESP Only). (#953)
2021-05-23 16:38:52 -05:00