Northern Man
7f7eed8812
Update to rtl_433_ESP 0.3.0 Resolves issue with sx127x chipset and receiving higher frequencies Includes support for receiving FSK signals, requires compiler directive OOK_MODULATION=false to switch to FSK mode Adds unit of measure for rtl_433/battery_ok devices RTL_433_ESP Battery Auto Discovery Missing Unit of Measurement #1644 Updates value template for rtl_433/battery_ok in openHab mode Resolves out of stack space crash lilygo-rtl_433 crash after chacon remote control button pressed #1655
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing by the way the number of physical bridges needed, and hiding the different technologies singularity behind a simple & wide spread communication protocol; MQTT.
Sponsors
Documentation
The documentation is here
The reference sheet, with the list of all functions, pinouts is here
Upload
Upload OpenMQTTGateway directly from the upload page (no additional software required) or build your own configuration with PlatformIO or Arduino IDE
First ready to go OpenMQTTGateway device !
Theengs plug is available flashed with OpenMQTTGateway, and brings the functions below:
- BLE to MQTT gateway, tens of Bluetooth devices supported thanks to Theengs Decoder library. The plug uses an ESP32 acting as a BLE to Wifi gateway to scan, decode and forward the data of the nearby sensors,
- Smart plug that can be controlled remotely,
- Energy consumption monitoring,
- Presence detection (beta).
Support the project by purchasing the Theengs plug The plug is available in North America only, other regions are planned.
Compatible items
-
List of supported devices, door/window sensors, PIR sensors, smoke detectors, weather stations...
-
List of compatible boards (Off the shelf or DIY) is available, RF Bridge, IR, BLE gateways...
Running on a computer If you want to use the BLE decoding capabilities of OpenMQTTGateway with a Raspberry Pi, Windows or Unix PC you can now leverage Theengs Gateway.
- List of compatible components to build your gateway, DHT, RF, IR emitters and receivers...
Compatible controllers, saas or software
Contributors ✨
Thanks goes to these wonderful people who helped OpenMQTTGateway on Github and to the users contributions into the community.
Support
For Questions or Support please don't open an issue, first go to the docs and if you don't find your answer there, you can post your question in the community forum
Help
If you like the project and/or used it please consider supporting it! It can be done in different ways:
- Helping other users in the community
- Contribute to the code or the documentation
- Buy devices, boards or parts from the compatible web site, the devices and parts linked use affiliated links.
- Donate or sponsor the project developpers
- Make a video or a blog article about what you have done with OpenMQTTGateway and share it to the community
Media
- Hackaday - ARDUINO LIBRARY BRINGS RTL_433 TO THE ESP32
- CNX Software - 433 MHz is not dead! Using an ESP32 board with LoRa module to talk to 433 MHz sensors
- RTL_433 PORTED TO ESP32 MICROCONTROLLERS WITH CC1101 OR SX127X TRANSCEIVER CHIPS
- Using low-cost wireless sensors in the unlicensed bands
- SMART PLUG ESP32 OPENMQTTGATEWAY SERVING AS AN BLE MQTT GATEWAY AND A POWER METER
Theengs Plug
433Mhz and BLE
BLE
433Mhz
LORA
