FlorianandDigiH
63e3dd9530
* Add OpenHAB3 tutorial and BLE binary * Small text changes Just a few small text changes, also writing out OMG as OpenMQTTGateway, probably clearer for new to OMG users. Co-authored-by: DigiH <github@digih.net>
73 lines
7.4 KiB
Markdown
73 lines
7.4 KiB
Markdown
# (Option 1) Upload from the web
|
|
|
|
::: tip Running on a tablet or phone
|
|
If you want to use the BLE decoding capabilities of OpenMQTTGateway with a tablet or smartphone you can use [Theengs App](https://app.theengs.io/).
|
|
:::
|
|
|
|
You can upload the firmware to your ESP device directly from here.
|
|
1. Plug in your ESP to a USB port.
|
|
2. Select the firmware in the box below.
|
|
3. Click the install button and choose the port that the ESP is connected to.
|
|
4. Wait until the process is complete.
|
|
5. Once completed you can configure your [Wifi and MQTT credentials](portal.md)
|
|
|
|
<web-uploader/>
|
|
|
|
The table below describes the libraries and the modules of each board configuration.
|
|
|
|
|Firmware|Boards compatible|Description|RF|IR|BLE|LORA|
|
|
|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
|
|
|**ESP32**|
|
|
|esp32-lolin32lite-ble|ESP32 Lolin lite|Suitable for low power with BLE gateway, [tutorial](https://1technophile.blogspot.com/2021/04/low-power-esp32-ble-gateway.html)|-|-|X|-|
|
|
|esp32-m5atom|M5Atom|Compact enclosure ESP32 with BLE gateway|-|(Emit)|X|-|
|
|
|esp32-m5stack-ble|M5Stack Core|Expandable module with BLE gateway, display, and little IR emitter|-|-|X|-|
|
|
|esp32-m5stick-ble|M5Stick Grey|Expandable module with BLE gateway and little IR emitter|-|(Emit)|X|-|
|
|
|esp32-m5stick-c-ble|M5Stick C Orange|Expandable module with BLE gateway, display, and little IR emitter|-|(Emit)|X|-|
|
|
|esp32-m5stick-cp-ble|M5Stick C Plus Orange|Expandable module with BLE gateway, display, and little IR emitter|-|(Emit)|X|-|
|
|
|esp32-m5tough-ble|M5Tough rugged|Expandable module with BLE gateway and display, suitable for outdoor|-|-|X|-|
|
|
|esp32-olimex-gtw-ble-eth|Olimex Ethernet Gateway (non POE)|BLE gateway with external antenna as an option|-|-|X|-|
|
|
|esp32-olimex-gtw-ble-poe|Olimex Ethernet Gateway (POE)|BLE gateway with external antenna as an option|-|-|X|-|
|
|
|esp32-olimex-gtw-ble-poe-iso|Olimex Ethernet Gateway (POE + ISO)|BLE gateway with external antenna as an option|-|-|X|-|
|
|
|esp32-olimex-gtw-ble-wifi|Olimex Ethernet Gateway (non POE) using wifi| BLE gateway|-|-|X|-|
|
|
|esp32dev-ble-cont|ESP32 dev board|BLE gateway with continuous scanning, suitable in particular for door and window BLE sensors (and all the others)|-|-|X|-|
|
|
|esp32dev-ble|ESP32 dev board|BLE gateway with one scan every 55s per default|-|-|X|-|
|
|
|esp32dev-ble-openhab|ESP32 dev board|BLE gateway with one scan every 55s per default and OpenHAB discovery|-|-|X|-|
|
|
|esp32dev-ble-mqtt-undecoded|ESP32 dev board|BLE gateway with the decoding offloaded to [Theengs Gateway](https://gateway.theengs.io/)|-|-|X|-|
|
|
|esp32dev-gf-sun-inverter|ESP32 dev board|RS232 reading of GridFree Sun Inverter|-|-|-|-|
|
|
|esp32dev-ir|ESP32 dev board|Infrared (Emitting and receiving) using [IRremoteESP8266](https://github.com/crankyoldgit/IRremoteESP8266)|-|X|-|-|
|
|
|esp32dev-multi_receiver|ESP32 dev board|Multi RF library with the possibility to switch between [ESPilight](https://github.com/puuu/ESPiLight), [RTL_433_ESP](https://github.com/NorthernMan54/rtl_433_ESP), [NewRemoteSwitch](https://github.com/1technophile/NewRemoteSwitch) and [RCSwitch](https://github.com/1technophile/rc-switch), need CC1101|X|-|-|-|
|
|
|esp32dev-pilight-CC1101|ESP32 dev board|Gateway using [ESPilight](https://github.com/puuu/ESPiLight) library only, need CC1101|X|-|-|-|
|
|
|esp32dev-pilight|ESP32 dev board|Gateway using [ESPilight](https://github.com/puuu/ESPiLight) without the need of CC1101|X|-|-|-|
|
|
|esp32dev-pilight-somfy-CC1101|ESP32 dev board|Gateway using [Somfy Remote](https://github.com/Legion2/Somfy_Remote_Lib) and [ESPilight](https://github.com/puuu/ESPiLight) library, need CC1101|X|-|-|-|
|
|
|esp32dev-rf|ESP32 dev board|RF gateway using [RCSwitch](https://github.com/1technophile/rc-switch) library|X|-|-|-|
|
|
|esp32dev-rtl_433|ESP32 dev board|Gateway using [RTL_433_ESP](https://github.com/NorthernMan54/rtl_433_ESP) library, need CC1101|X|-|-|-|
|
|
|esp32dev-somfy-CC1101|ESP32 dev board|Gateway using [Somfy Remote](https://github.com/Legion2/Somfy_Remote_Lib) library, need CC1101|X|-|-|-|
|
|
|esp32dev-weatherstation|ESP32 dev board|Gateway to retrieve weather station data Ventus W174/W132 (tested), Auriol H13726, Hama EWS 1500, Meteoscan W155/W160 using [WeatherStationDataRx](https://github.com/Zwer2k/WeatherStationDataRx)|X|-|-|-|
|
|
|esp32feather-ble|ESP32 Feather Adafruit|BLE for the Adafruit Feather board|-|-|X|-|
|
|
|heltec-wifi-lora32-868|ESP32 HELTEC LORA V2|LORA communication 868Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa) |-|-|-|X|
|
|
|heltec-wifi-lora32-915|ESP32 HELTEC LORA V2|LORA communication 915Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
|
|
|tinypico-ble|ESP32 TinyPICO|BLE Gateway|-|-|X|-|
|
|
|ttgo-lora32-v1-868|ESP32 TTGO LORA V1|LORA communication 868Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
|
|
|ttgo-lora32-v1-915|ESP32 TTGO LORA V1|LORA communication 915Mhz using [arduino-LoRA](https://github.com/sandeepmistry/arduino-LoRa)|-|-|-|X|
|
|
|ttgo-tbeam|ESP32 TTGO T BEAM|BLE gateway with battery holder|-|-|X|-|
|
|
|esp32dev-ble-datatest|ESP32 dev board|Default BLE gateway with additional servicedata, manufacturerdata and service uuid for analysing decoding issues|-|-|X|-|
|
|
|**ESP8266**|
|
|
|nodemcuv2-2g|ESP8266 board|SMS gateway, need A6/A7 GSM module|-|-|-|-|
|
|
|nodemcuv2-ble|ESP8266 board|BLE gateway, need HM10 Module|-|-|X|-|
|
|
|nodemcuv2-ir|ESP8266 board|Infrared gateway using [IRremoteESP8266](https://github.com/crankyoldgit/IRremoteESP8266)|-|X|-|-|
|
|
|nodemcuv2-rf-cc1101|ESP8266 board|RF gateway using [RCSwitch](https://github.com/1technophile/rc-switch) library, need CC1101|X|-|-|-|
|
|
|nodemcuv2-rf|ESP8266 board|RF gateway using [RCSwitch](https://github.com/1technophile/rc-switch) library|X|-|-|-|
|
|
|nodemcuv2-rf2-cc1101|ESP8266 board|KAKU RF gateway using [NewRemoteSwitch](https://github.com/1technophile/NewRemoteSwitch) library, need CC1101|X|-|-|
|
|
|nodemcuv2-rf2|ESP8266 board|KAKU RF gateway using [NewRemoteSwitch](https://github.com/1technophile/NewRemoteSwitch) library|X|-|-|-|
|
|
|nodemcuv2-pilight|ESP8266 board|Gateway using [ESPilight](https://github.com/puuu/ESPiLight) without the need of CC1101|X|-|-|-|
|
|
|nodemcuv2-RS232|ESP8266 board|RS232 gateway|-|-|-|-|
|
|
|nodemcuv2-somfy-cc1101|ESP8266 board|Somfy RF gateway using [Somfy Remote](https://github.com/Legion2/Somfy_Remote_Lib) library, need CC1101|X|-|-|-|
|
|
|nodemcuv2-weatherstation|ESP8266 board|RF gateway using [WeatherStationDataRx](https://github.com/Zwer2k/WeatherStationDataRx) library|X|-|-|-|
|
|
|rf-wifi-gateway|ESP8266 board|RF gateway for USB stick using [RCSwitch](https://github.com/1technophile/rc-switch) library|X|-|-|-|
|
|
|rfbridge|ESP8255 board|RF gateway for the Sonoff RF Bridge relying on the internal decoder|X|-|-|-|
|
|
|sonoff-rfbridge-direct|ESP8255 board|RF gateway for the Sonoff RF Bridge requiring direct hack, relying on [ESPilight](https://github.com/puuu/ESPiLight) library, [tutorial](https://1technophile.blogspot.com/2019/04/sonoff-rf-bridge-pilight-or-how-to.html)|X|-|-|-|
|
|
|sonoff-basic|ESP8255 board|Wifi relay|-|-|-|-|
|
|
|sonoff-basic-rfr3|ESP8255 board|Wifi relay and RF receiver using [RCSwitch](https://github.com/1technophile/rc-switch) library, [tutorial](https://1technophile.blogspot.com/2019/08/new-sonoff-rfr3-as-433tomqtt-gateway.html)|Rec|-|-|-|
|
|
|
|
[](https://hits.seeyoufarm.com)
|