f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
42 lines
1.2 KiB
Markdown
42 lines
1.2 KiB
Markdown
# Sensors
|
|
## Compatible sensors
|
|
|Module|Purpose|
|
|
|-|-|
|
|
|DHT11|Temperature, Humidity|
|
|
|DHT22|Temperature, Humidity|
|
|
|HCSR501|PIR|
|
|
|BH1750|Digital light|
|
|
|BME280|Temperature, Humidity, Pressure|
|
|
|BMP280|Temperature, Pressure|
|
|
|C-37, YL-83, HM-RD|Leak, Water|
|
|
|HTU21|Temperature, Humidity|
|
|
|GPIO Input|Inputs|
|
|
|GPIO KeyCode|Keycode|
|
|
|INA226|Current, Voltage|
|
|
|MQ2|Gas (flammable)|
|
|
|TEMT6000|Luminosity|
|
|
|TSL2561|Luminosity|
|
|
|
|
## Pinout
|
|
|Module|Arduino Pin| ESP8266 Pin|ESP32 Pin|
|
|
|-|-|-|-|
|
|
|Analog reading|A0|A0|A0|
|
|
|BH1750 SDA|A4|D2|21|
|
|
|BH1750 SCL|A5|D1|22|
|
|
|BME280/BMP280 SDA|A4|D2|21|
|
|
|BME280/BMP280 SCL|A5|D1|22|
|
|
|C-37, YL-83, HM-RD|A0 + D14|A0 + D14|A7 + D14|
|
|
|DHT11/22|<a href="img/OpenMQTTgateway_Arduino_Addon_DHT.png" target="_blank">D8</a>|<a href="img/OpenMQTTgateway_ESP8266_Addon_DHT.png" target="_blank">D1</a>|16|
|
|
|HC-SR501/HC-SR505|7|D5|5|
|
|
|HTU21 SDA|A4|D2|21|
|
|
|HTU21 SCL|A5|D1|22|
|
|
|INA226 SDA|A4|D2|21|
|
|
|INA226 SCL|A5|D1|22|
|
|
|MQ02 |A0 + D4|A0 + D4|A0 + D4|
|
|
|TEMT6000 |A0|A0|A0|
|
|
|TSL2561 SDA|A4|D2|21|
|
|
|TSL2561 SCL|A5|D1|22|
|
|
|
|
Vcc pin of the board and the Module to a 3.3V or 5V supply source depending on sensor voltage requirement.
|
|
Ground pins of the board and the Module to the ground of the supply source.
|