Northern Man 19d58e01e0 Defensive code for Heltec Display (#1296) ...

Added to Heltec board display code logic to reduce corruption of messages on the display

Two piece of defensive code were added

- Only display messages to the display when operating on Core 1 ( Default Arduino ESP32 CONFIG_ARDUINO_RUNNING_CORE )

- Only display one character/string at a time

In the event of failure, default to Serial output.

PS SSD1306 driver similar issues

https://github.com/ThingPulse/esp8266-oled-ssd1306/issues/326
https://github.com/ThingPulse/esp8266-oled-ssd1306/issues/352

2022-10-23 13:36:59 -05:00

..

config_2G.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_ADC.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_AHTx0.h

Add AHTx0 Sensor (AHT10 and AHT20) (#687)

2020-07-04 09:40:06 -05:00

config_BH1750.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_BME280.h

Support for BME280 Temperature Correction (#1062)

2021-08-16 19:35:02 -05:00

config_BT.h

Re-publish BTtoMQTT Theengs discovery topics on MQTT re-connect (#1290)

2022-10-23 10:57:39 -05:00

config_DHT.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_DS1820.h

Fix DS18B20 not working properly (#1121)

2022-01-02 18:15:43 -06:00

config_FASTLED.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_GFSunInverter.h

GridFree SUN-2000G (#926)

2021-04-23 20:40:09 -05:00

config_GPIOInput.h

Allow inversion of input GPIO (#997)

2021-06-26 09:31:05 -05:00

config_GPIOKeyCode.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_HCSR04.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

config_HCSR501.h

Add ability to inverse notify PIR LED (#765)

2020-09-22 13:04:29 -05:00

config_HELTEC.h

Defensive code for Heltec Display (#1296)

2022-10-23 13:36:59 -05:00

config_HTU21.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_INA226.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_IR.h

MQTT-MAC-IP-mDNS (#1245)

2022-07-19 12:10:51 -05:00

config_LORA.h

Lora band define (#1231)

2022-06-29 12:14:18 -05:00

config_M5.h

Heltec SSD1306 Display Support (#1283)

2022-10-13 21:17:25 -05:00

config_mqttDiscovery.h

Re-publish discovery topics on re-connect (via cfg, disabled by default) (#1274)

2022-09-26 15:49:02 -05:00

config_ONOFF.h

Adding low_pulse (#1120)

2022-01-01 19:47:23 -06:00

config_PWM.h

Add new actuator : PWM controller (#737)

2020-09-02 11:17:36 -05:00

config_RF.h

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

config_RFM69.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_RS232.h

Basic RS232 Communication (#780)

2020-10-19 13:48:58 -05:00

config_SHTC3.h

Feature/add shtc3 (#843)

2021-01-05 19:17:39 -06:00

config_Somfy.h

added ZactuatorSomfy (#816)

2020-12-13 12:46:10 -06:00

config_SRFB.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_TSL2561.h

Added clang-format (#623)

2020-06-09 16:09:23 -05:00

config_WeatherStation.h

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

main.ino

Re-publish BTtoMQTT Theengs discovery topics on MQTT re-connect (#1290)

2022-10-23 10:57:39 -05:00

User_config.h

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

ZactuatorFASTLED.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZactuatorONOFF.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZactuatorPWM.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZactuatorSomfy.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZboardHeltec.ino

Defensive code for Heltec Display (#1296)

2022-10-23 13:36:59 -05:00

ZboardM5.ino

Add M5Tough board (#1135)

2022-01-17 19:22:26 -06:00

Zgateway2G.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZgatewayBLEConnect.h

Add Switchbot support and discovery. (#995)

2022-04-30 09:16:06 -05:00

ZgatewayBLEConnect.ino

Add Switchbot support and discovery. (#995)

2022-04-30 09:16:06 -05:00

ZgatewayBT.ino

Re-publish BTtoMQTT Theengs discovery topics on MQTT re-connect (#1290)

2022-10-23 10:57:39 -05:00

ZgatewayGFSunInverter.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZgatewayIR.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZgatewayLORA.ino

Configure LoRA gateway parameters at startup (#1234)

2022-07-13 23:49:31 +02:00

ZgatewayPilight.ino

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

ZgatewayRF2.ino

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

ZgatewayRF.ino

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

ZgatewayRFM69.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZgatewayRS232.ino

Basic RS232 Communication (#780)

2020-10-19 13:48:58 -05:00

ZgatewayRTL_433.ino

Update of rtl_433_ESP to version 0.1.3 - Support for SX127X transceiver module (#1291)

2022-10-20 11:14:45 -05:00

ZgatewaySRFB.ino

Publishing/receiving inconsistencies fix (#1229)

2022-07-01 07:17:02 -05:00

ZgatewayWeatherStation.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZmqttDiscovery.ino

Fix missing lowpowermode attribute (#1281)

2022-10-10 18:30:46 -05:00

ZsensorADC.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorAHTx0.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorBH1750.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorBME280.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorDHT.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorDS1820.ino

Fix DS18B20 not working properly (#1121)

2022-01-02 18:15:43 -06:00

ZsensorGPIOInput.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorGPIOKeyCode.ino

Replace pin by gpio (#631)

2020-06-13 20:04:36 -05:00

ZsensorHCSR04.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorHCSR501.ino

Generalize the use of JSON_MSG_BUFFER (#1114)

2021-12-20 19:37:06 -06:00

ZsensorHTU21.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorINA226.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorSHTC3.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

ZsensorTSL2561.ino

Update to use ArduinoJson 6+ (#1071)

2021-09-01 19:18:19 -05:00

zzHTTPUpdate.cpp

Support Home Assistant Long-term Statistics #1087 (#1088)

2021-10-14 18:46:13 -05:00

zzHTTPUpdate.h

Trigger firmware update via MQTT (ESP Only). (#953)

2021-05-23 16:38:52 -05:00