f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
24 lines
674 B
Markdown
24 lines
674 B
Markdown
# Actuators
|
|
## Compatible parts
|
|
|Module|Purpose|
|
|
|-|-|
|
|
|LED|Basic led|
|
|
|FASTLED|RGB Leds management|
|
|
|BUZZER|-|
|
|
|RELAY|Switch power circuit|
|
|
|
|
## Pinout
|
|
|Module| Boards|
|
|
|-|-|
|
|
|RELAY|all output compatible pins|
|
|
|FASTLED|all output compatible pins|
|
|
|
|
Vcc pin of the board and the Module to a 5V supply source
|
|
Ground pins of the board and the Module to the ground of the supply source.
|
|
|
|
## Somfy RTS
|
|
For this actuator a 433.42 MHz RF transmitter is required.
|
|
The standard 433.92 MHz transmitter don't work.
|
|
The CC1101 Transceiver supports both 433.42 MHz and 433.92 MHz and can be used with the Somfy RTS actor.
|
|
The wiring of the hardware is described in the [RF gateway](rf).
|