0 Fork 0

Files

T

f5b33104ef [DOCS] Overhaul new-user onboarding, home page, and upload flow (#2347 )

Getting started:
- New 15-minute Getting Started guide featuring the two most popular
  tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup
  and a verification step
- Sidebar restructured around the new-user journey; upload options
  numbered by ease; Gitpod upload method removed

Home page:
- VitePress hero with clear actions, larger hero image
- How-it-works pipeline diagram shared as a component (responsive via
  container queries), use-case grid, bigger video tiles without the
  image lightbox, refreshed press coverage list, functions pills
- Support section pointing to Theengs Bridge and
  github.com/sponsors/1technophile

Upload flow:
- Decision-oriented upload landing page (journey strip, method cards,
  comparison table)
- Pre-flight checklist and driver troubleshooting on the web installer
- Guided environment picker (bridge + hardware wizard) replacing the
  filter chips, with manifest-verified recommendations
- Post-flash next-steps card linking to the portal and verification

Board images:
- custom_img key in environments.ini and board photos for all
  web-flashable environments (licenses recorded); private prod_env.ini
  environments excluded from boards-info.json

Corrections:
- RF frequency coverage stated as 433/315/868/915MHz
- Removed references to the retired compatible.openmqttgateway.com
  site (BLE list is decoder.theengs.io), the discontinued Theengs
  Plug, and the private sponsor forum


Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi

Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>

2026-08-03 10:23:43 -05:00

2.0 KiB

Raw Permalink Blame History

Devices

For Bluetooth, the maintained list of supported devices is the Theengs Decoder compatible devices list. For the other technologies, the sections below give an overview of what is supported:

For radio frequency devices

OpenMQTTGateway can support a wide range of 433mhz/315mhz devices, all the ones with SC5262 / SC5272, HX2262 / HX2272, PT2262 / PT2272, EV1527, RT1527, FP1527, HS1527 chipsets are supported by the RF gateway. Added to that RF2 support Kaku and Pilight an huge list. Note that for the moment RF, RF2 and Pilight can not be activated on the same boards together.

For BLE devices

OpenMQTTGateway is able to scan all the BLE devices that advertise their data so as to do presence detection. Added to that it retrieves the measures from the devices mentioned and linked to below. By default the data are read from the advertisements (no or very little impact on device battery life). For some devices we may connect briefly only to retrieve one or several parameters.

OpenMQTTGateway currently supports the decoding of more than 100 Bluetooth devices, which include popular devices like Mi Flora, Xiaomi scales, Inkbird, Govee and ThermoPro thermo-hygrometers and BBQ thermometers, SwitchBot devices status and many more.

::: tip

(2) See https://github.com/atc1441/ATC_MiThermometer
(3) See https://github.com/pvvx/ATC_MiThermometer :::

For infrared IR devices

The list of supported devices for ESP is here, and here for Arduino boards, as there is also the possibility of using raw and global cache (ESP) sending possibilities of this gateway is huge!

LORA

LoRa is more dedicated at this moment for tinkering and DIY and there is no Off the shelves devices compatible to my knowledge with this gateway.

2.0 KiB Raw Permalink Blame History