* partial MAC in title
• Last three octets of MAC address in title to differentiate devices with the same model name.
• fixed memory leak
• process optimisation
* lcd to oled
lcd to oled renaming
* [RTL_433 Discovery] Add Govee water sensor Status entity
Add Govee water status sensor auto discovery as a binary_sensor, the entity will detect Water Leak Event and go back to Off state after 60seconds
* Format and comment
* [BT] Add BM2 voltage
Voltage retrieval through a BLE connection, frequency of the BLE connection is defined by `intervalcnct`
* Add doc
Credits to https://github.com/KrystianD/bm2-battery-monitor
* BLE Display - THB, THBX, PLANT, AIR, BATT, BODY
* SCALE
* BBQ
* Filter MS-CDP, GAEN and IBEACON
* Mopeka & Smart Dry
* ACEL
ACEL sensor, as most also have temp and hum, but no acceleration info display included so far.
* Only display when properties are present
Only display when properties are present, to avoid model only display for devices which require active scanning at a larger interval, e.g. Mi Band and similar.
* LilyGo-BLE environment
* BLE display relocated
BLE display relocated to have pubadvdata "type" in message, required for the different type display functions.
* Inverted idle logo
Back on white background start-up logo.
Inverted idle logo with random positioning.
* Idle Logo display default true
DISPLAY_IDLE_LOGO true as burn-in screens saver, especially fo the constant heading and line
* Display Brightness added
* SSD1306toMQTT / MQTTtoSSD1306
Additional "onstate" and "brightness" setting and regular display state reporting
Docs - separate Displays section
* [OTA] Add automatic OTA updates
This feature will enable to update the gateway with one button or a simple MQTT command.
* [CI] Enable automatic OTA for nightly development builds
And integrate the latest_version file creation into the CI
Enable to specify a particular version
and switch between dev and production builds
To enable boards with the constant power supply to don't build this function.
Change the default behavior for the mode not to be built by default.
Only the boards with batteries are keeping it
Set `interval` and `intervalacts` to the minimum when adaptive scanning is deactivated. When the user encounters a situation on which a device is not detected due to adaptive scanning, we set the gateway to continuous active to maximize the chance to detect the device.
By not deinitializing BLE at the start, if it has not been initialized. Setting the time between waking up from the macro rather than the config interval.
This one does not have a value at the start.
DigiH