* add script to compress firmware before ota upload
* add examples for OTA flashing/updating Sonoff RF Bridge
- use compress script to save space uploading firmware
- use "board_build.ldscript = eagle.flash.1m64.ld" to free some additional space for OTA flashing.
* Support for BME280 Temperature Correction
The Spark Fun BME 280 library has support for Temperature correction, and this pull request implements the ability to apply a correction via a compiler directive ( BME280Correction ).
* Add ability to change MQTT topic and or gateway name by MQTT command.
This adds new commands to allow changing the MQTT topic and or gateway name from a command.
The new topic/name will be saved in flash memory and used on subsequent reboots.
Either/both parameters can be sent or combined with other commands.
Example use:
```
mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoSYS/config" -m
'{
"mqtt_topic": "topic/",
"gateway_name: "name"
}'
```
* Update example with /
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Allow for hiding mqtt config settings in wifimanager setup.
Adds the macro `WIFIMNG_HIDE_MQTT_CONFIG` that when defined will hide the mqtt configuration in the wifimanager setup.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Disable MQTTsetMQTT and MQTT_HTTPS_FW_UPDATE to allow OTA for Avatto Bakery IR
Trying to update my Avattos with the currently released 0.9.8 I found that OTA wasn't possible any longer as the build was now to large
0.9.8
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
this goes back to 0.9.7, where WiFi, MQTT and firmware update was introduced over MQTT commands
0.9.7
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
Going back to building 0.9.6 I was able to OTA update again with the much smaller build
0.9.6
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.7% (used 32512 bytes from 81920 bytes)
Flash: [==== ] 41.4% (used 396804 bytes from 958448 bytes)
Building 0.9.8 with the flags brings the build back to OTAable size
0.9.8 with
'-UMQTTsetMQTT'
'-UMQTT_HTTPS_FW_UPDATE'
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.9% (used 32684 bytes from 81920 bytes)
Flash: [==== ] 42.3% (used 405024 bytes from 958448 bytes)
Similar to the flag setting in [env:rfbridge]
I'm not even sure if MQTT_HTTPS_FW_UPDATE would even work on the Avatto, with the limited flash memory.
Should we also add
board_build.ldscript = eagle.flash.1m64.ld
as a default, as it's required for OTA updates on the Avattos as discussed in https://github.com/1technophile/OpenMQTTGateway/issues/763#issuecomment-698864712 ?
* Doc addition for restricted MQTT options
Doc addition for https://github.com/1technophile/OpenMQTTGateway/pull/1046 and https://github.com/1technophile/OpenMQTTGateway/pull/986
This allows for directly uploading OMG to ESP32 and ESp8266 devices from the upload section of the documentation.
This will upload the latest release binary for the device selected in the dropdown menu on the webpage.
A script has been added to generate the upload page when a new release is issued.
This will remove the sending of BLE service data when multiple service data attributes are advertised by a broadcasting device.
Instead the data for known device types will be consolidated into a single message to reduce overhead.
When updating from the MQTT command from a SSL enabled server this adds an option to provide
the server SSL certificate with the command.
This is useful if connecting to different servers or if the configured certificate has expired
and requires updating to not lose the ability to update via OTA.
The certificate provided will be saved to flash memory for use on subsequent restarts.
While playing with the new BLE READ/WRITE feature for my Playbulb Candles I found that writing was not possible for characteristics which are WriteWithoutResponse only.
I implemented this quick fix which might be useful for others with devices for which they want to write to WriteWithoutResponse characteristics.
Alternatively a more slective option could be possible for a future release, i.e. adding an additional WRITE tag like "ble_write_withoutresponse": true/false
* Set OTA name as Gateway_Short_Name + MAC if using mac as gateway name.
This will set the OTA name of the gateway to the *Gateway_Short_Name*_*MAC* when USE_MAC_AS_GATEWAY_NAME is defined in the config.
* Log OTA hostname when using MAC as gateway name.
* Define MQTTsetMQTT for configuring MQTT over MQTT
* Enable MQTTsetMQTT per default on all ESP except RFBridge
Co-authored-by: Dave <d.kneisz@gmail.com>
This allows for setting the WiFimanager debug level for more or less verbosity using the WM_DEBUG_LEVEL macro.
Valid values are:
DEBUG_ERROR = 0,
DEBUG_NOTIFY = 1, // default
DEBUG_VERBOSE = 2,
DEBUG_DEV = 3,
DEBUG_MAX = 4
Adds the macro USE_MAC_AS_GATEWAY_NAME, when defined the gateway name will default to
OMG_XXXXXXXXXXXX, where the X's are the mac address characters.
This can still be changed in WiFiManager.
This will provide the expected funtionality for the reset trigger when the button is pressed for more than 10 seconds.
Also allows the same pin to be used as an actuator/relay trigger if pressed for less than 10 seconds.
Florian