* Add a lock mechanism to improve the OTA chances of success
change TimeBeforeMQTTconnect to InitialMQTTConnectionTimeout
move delay(BLEinterval); after the scan so the first scan will always be done at start now
remove non relevant delay
add stopProcessing and startProcessing functions
* Automatically set mqtt buffer size
Current versions of pubsubclient allows the buffer size to be set
dynamically: https://github.com/knolleary/pubsubclient/pull/282
We can take advantage of this to avoid having to modify one of the
dependencies and instead automatically up the buffer size when a
powerful board is detected.
* Refactor BLE gateways:
-merge HM10 and ESP32 code
-publish sensor values with the other BLE device parameters to avoid MQTT multiple publication
-make uniform the case of mac adress id between HM10 and ESP32
-add the possibility to remove service data publishing either when sensors is recognised or not
-correct manufacturing data display
-merge process cleargrass methods
-check service data validity before processing
replace datastring with hex string handling, enable the direct use of an MQTT received hex signal w/o syntax change
correct a bug on protocol identification when the protocol is a derivative of another one and share a common name piece
Rename set commands to config
correct json buffer size and gateway name
replace state to cmd
replace set by config
add restart and erase command
add unicity to gateway command switches
BLE devices shouldn't be child of the gateway
make the BTtoMQTT topic consistent with other definitions
change link to sources
add credits and some shape for readme
add cleargrass with air pressure and mi band
add PWA
add plugins
Add new boards
improve doc with boars and ble devices
* update irremoteesp8266
* add new protocols, simplify API and publish protocol name
-added the following protocols:
#define IR_LEGOPF
#define IR_MITSUBISHI_HEAVY_88
#define IR_MITSUBISHI_HEAVY_152
#define IR_DAIKIN216
#define IR_SHARP_AC
#define IR_GOODWEATHER
#define IR_INAX
#define IR_DAIKIN160
#define IR_NEOCLIMA
#define IR_DAIKIN176
#define IR_DAIKIN128
#define IR_AMCOR
#define IR_DAIKIN152
#define IR_MITSUBISHI136
#define IR_MITSUBISHI112
#define IR_HITACHI_AC424
-changed the send API, now you can use the protocol name directly exemple NEC instead of IR_NEC
-publish the protocol name to MQTT added to the number
-replace long by long long
* missing repeat definitions
and set default repeat value to 0
* move protocol name retrieving outside arduino scope
* put all protocols with capital letters
* modify doc
* add long long activation for arduino json on test_config file
Florian