* MQTT discovery improvements
-remove gatewayBT
-remove device class formaldehyde (not existing in HASS)
-add SYStoMQTT new parameters
-attach connectivity parameter to the device
-add BT gateway infos and switches
-refactor modules storage and publication
* Add Home Assistant auto discovery feature
Add HA auto discovery to RF2.
For each unique combination of unit, groupbit and address a switch will be added to Home Assistant called: "RF2_[unit]_[groupbit])_[address].
As RF2 433Mhz switches do not render their state, no state topic will be provided in the discovery.
This will cause the switch to be in optimistic mode in HA with separate on and off icons.
The two separate on/off icons allow for subsequent on commands to support the dimming feature of KAKU switches like ACM-300.
Co-authored-by: hbraam <hbraam@users.noreply.github.com>
* Initial generalization from a PWM LED controller, to a PWM controller.
Allow the config file to set the name of each channel and the number of channels.
Fade time is now per-channel, so MQTT messages can genuinely set an individual channel, and specify the fade time for that channel.
The default gamma is configurable in the config.
-replace low power led by led info
-enable to change the led ON value
-go upper case for the led macros
Also transform BLE connect warning to notice in log
Add Sonoff RF Bridge LED
* Add LYWSD03MMC and MHO-C401 device
and an associated BLE connect mechanism as these devices advertise only encrypted data
-free manufacturer data
-update library
* Implement scans number before connect
-Add the possibility to do a connect every X scan
-Rename variables for consistency
-Some refactoring for improved code reading
* Add JQJCY01YM Formaldcehyde detector
The device publish also the temperature, humidity and battery
* Reduce ServicedataMinLength
so as to read battery data of this device and others
* [breaking] Refactor the BLE devices identification
generalize the use of the mac address with : for the lists, white, black and internal identification
Move structures from config_BT.h to ZgatewayBT.ino
update doc
* Move minRssi to INO and optimizations
change Minrssi name to match other variable convention
Optimize the add of : to mac address
Reduce the use of abs()
Note: I cannot move BLEinterval to the ZgatewayBT.ino due to its use on main.ino
* added support for secure TLS connections
on ESP32 and ESP8266 close#101
* added TLS test builds
* added documentation for TLS
fixed some some issues in the documentation
* added documentation for error code=54
* Detect when sensor isn't available or read fails
* Add temperature conversion macros
* Add 'tempc' & 'tempf' keys to published values
* Unique Values for HA Discovery
* Remove degree symbol from temp sensors
Co-authored-by: Jonathan Michael Wells <jonathan-wells@oist.jp>
* handle 64 bits values, except for UNO
Arduino UNO is not enough powerfull to handle properly uint64_t in terms of memory so differenciate the variable type depending on the board type
With this configuration ATMega will not be able to receive with simpleReceiving 64 bits values. Of course Json will work with 64 bits values for this board.
* Simplify jsondata.success() condition
* Renamings and optimize deduplication functions
* replace 2 dimensions array by a structure so as to handle the time with an uint32_t when using an ESP (instead of a uint64_t)
* change storeValue and isAduplicate function names
* point to the rcswitch revision with the new 40 bits protocol
Co-authored-by: Leon Kiefer <leon.k97@gmx.de>
Change sha commit separation key for PIO
complete the name of htu21 library,
PIO Add github full path to the libraries def
and add rfm69spi library
and add rfm69 low power
