Includes the following updates to rtl_433_ESP:
1 - Workaround for cc1101 module going deaf after 24 hours, issue #16.
- By default the workaround is enabled, define NO_DEAF_WORKAROUND to remove the workaround
2 - Improved process for updating from rtl_433 for GitHub, almost totally automated.
- FYI - Their is a shell script in the tools subdirectory which does most of the heavy lifting required
3 - Updated device decoders to latest release of rtl_433
- They are now in align with rtl_433 release 21.12
4 - Updated r_api.c to prioritize ook demodulators - feature from rtl_433
5 - Created contrib directory for other device decoders to be merged into code base as part of the rtl_433 update process
6 - Bump library version to 0.0.3
7 - Tuned signal receiver logic and now throw away the first received byte. On testing this appears to dramatically reduce the number of unparsed signals.
8 - Fixed README feedback from @DigiH and updated the wording for 'PUBLISH_UNPARSED'. Also removed serial logging of unparsed messages unless 'PUBLISH_UNPARSED' is set
9 - Fixed gitignore so that the clone of rtl_433 is no longer part of the repository.
10 - Added new DEFINITION to enable rtl_433 verbose mode for a single device decoder. RTL_VERBOSE=##
* add script to compress firmware before ota upload
* add examples for OTA flashing/updating Sonoff RF Bridge
- use compress script to save space uploading firmware
- use "board_build.ldscript = eagle.flash.1m64.ld" to free some additional space for OTA flashing.
* Support for BME280 Temperature Correction
The Spark Fun BME 280 library has support for Temperature correction, and this pull request implements the ability to apply a correction via a compiler directive ( BME280Correction ).
* Add ability to change MQTT topic and or gateway name by MQTT command.
This adds new commands to allow changing the MQTT topic and or gateway name from a command.
The new topic/name will be saved in flash memory and used on subsequent reboots.
Either/both parameters can be sent or combined with other commands.
Example use:
```
mosquitto_pub -t "home/OpenMQTTGateway/commands/MQTTtoSYS/config" -m
'{
"mqtt_topic": "topic/",
"gateway_name: "name"
}'
```
* Update example with /
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Allow for hiding mqtt config settings in wifimanager setup.
Adds the macro `WIFIMNG_HIDE_MQTT_CONFIG` that when defined will hide the mqtt configuration in the wifimanager setup.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Disable MQTTsetMQTT and MQTT_HTTPS_FW_UPDATE to allow OTA for Avatto Bakery IR
Trying to update my Avattos with the currently released 0.9.8 I found that OTA wasn't possible any longer as the build was now to large
0.9.8
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
this goes back to 0.9.7, where WiFi, MQTT and firmware update was introduced over MQTT commands
0.9.7
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
Going back to building 0.9.6 I was able to OTA update again with the much smaller build
0.9.6
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.7% (used 32512 bytes from 81920 bytes)
Flash: [==== ] 41.4% (used 396804 bytes from 958448 bytes)
Building 0.9.8 with the flags brings the build back to OTAable size
0.9.8 with
'-UMQTTsetMQTT'
'-UMQTT_HTTPS_FW_UPDATE'
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.9% (used 32684 bytes from 81920 bytes)
Flash: [==== ] 42.3% (used 405024 bytes from 958448 bytes)
Similar to the flag setting in [env:rfbridge]
I'm not even sure if MQTT_HTTPS_FW_UPDATE would even work on the Avatto, with the limited flash memory.
Should we also add
board_build.ldscript = eagle.flash.1m64.ld
as a default, as it's required for OTA updates on the Avattos as discussed in https://github.com/1technophile/OpenMQTTGateway/issues/763#issuecomment-698864712 ?
* Doc addition for restricted MQTT options
Doc addition for https://github.com/1technophile/OpenMQTTGateway/pull/1046 and https://github.com/1technophile/OpenMQTTGateway/pull/986
dependabot[bot]