With only one control that enables the publication of all the advertisement data, default: false
Note that if the sensor is not recognized, we will no longer publish its advertisement data unless the control is true. This is for the sake of traffic reduction.
The previous macro used SENS_SAR_MEAS_WAIT2_REG to identify if we have the reading capability was not working, so replacing it by a fresh one NO_INT_TEMP_READING, defined as a negation due to the fact that most of the ESP32 supports internal temperature reading.
* Add automatic stop of relay following ESP32 temperature
To avoid overheating when too much current goes through the device.
Add internal temperature reporting to SYStoMQTT
This function is not available with ESP32 S3 and C3
* Temp update and error log
Update of the temperature to get closer to the datasheet of the ESP32 -40 +85C
and add the module name to the error log
This also changes the topic structure when using the macro valueAsATopic=true, it adds as sub-topics the `type, subtype, and channel` when they exist.
The id is the last subtopic to facilitate filtering, as it may change when replacing the batteries.
Co-authored-by: NorthernMan54 <19808920+NorthernMan54@users.noreply.github.com>
I don't think there is usage for such a switch into HA, if you see it, auto discovery was already activated and all the entities created, so you will have to go to the mqtt client to remove the retained messages.
If you don't want auto discovery as an HA user you would have to go to the mqtt client to send the discovery message deactivation.
So either way as a HA user you have to go to a client.
And as people not wanting to use auto discovery with HA are the people that are not using HA this switch as a little value.
The current way of saving settings is through the retain flag of the MQTT commands, unfortunately if several commands are issues they may overwrite each other. So as to prevent it, we now leverage the memory saving introduced earlier to store the BLE settings.
Also leverage the config status publication to show the state through the button position (optimistic false)
This commit add the capability to set passive scanning during runtime, versus buildtime before, so as to improve energy consumption of sensors when they don't require active scanning
* First draft of LM75 sensor based on HTU21 sensor
* Initialise I2C on ESP8266
* Add LM75 sensor to test builds
So that it will be tested with the continuous integration
* Adding unique device names to HA dicovery
Multiple devices of the same model got the same name in Home Assistant,
making the device list less informative when there are many of e.g. the
same sensor.
To over come this changed the function publishing discovery messages to
add the second half of the device mac address to the device name so it
becomes unique.
Issue: #1269
* Use a task to process immediate BLE actions to prevent MQTT disconnection if the action takes too long to complete.
* Add state_on and state_off parameters to createDiscovery
Useful if you want to scan continuously for BLE device, in this case you should deactivate the BLE connect to avoid concurrency between scan and connect
Create automatically devices into Home Assistant through MQTT auto discovery
Before, only entities were created automaticaly and they were not linked to a device.
Enable HASS to retrieve data of remote sensors from multiple gateways by using wildcards for the location (instead of default:home) and the gateway name (instead of default:OpenMQTTGateway)
* MQTT discovery improvements
-remove gatewayBT
-remove device class formaldehyde (not existing in HASS)
-add SYStoMQTT new parameters
-attach connectivity parameter to the device
-add BT gateway infos and switches
-refactor modules storage and publication
* Add Home Assistant auto discovery feature
Add HA auto discovery to RF2.
For each unique combination of unit, groupbit and address a switch will be added to Home Assistant called: "RF2_[unit]_[groupbit])_[address].
As RF2 433Mhz switches do not render their state, no state topic will be provided in the discovery.
This will cause the switch to be in optimistic mode in HA with separate on and off icons.
The two separate on/off icons allow for subsequent on commands to support the dimming feature of KAKU switches like ACM-300.
Co-authored-by: hbraam <hbraam@users.noreply.github.com>
* Detect when sensor isn't available or read fails
* Add temperature conversion macros
* Add 'tempc' & 'tempf' keys to published values
* Unique Values for HA Discovery
* Remove degree symbol from temp sensors
Co-authored-by: Jonathan Michael Wells <jonathan-wells@oist.jp>
Florian