* Bump Theengs Decoder to v095
* IBT-4XC inclusion by @DigiH in #208
* ThermoPro TP359 by @DigiH in #210
* IBS-TH1 external probe differentiation by @DigiH in #211
* CGG1 firmware extension by @DigiH in #218
* Otio/BeeWi BSDOO by @DigiH in #214
The main features of the upgrade to 0.1.3 of rtl_433_ESP are
1 - Change Transceiver Library to RadioLib
2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).
3 - Added automatic calibration of the RSSI Signal detection Threshold
4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task
5 - Moved received signal decoding to a ESP32 Task
6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.
7 - Multi Receiver support has been validated with RF, RF2 and PiLight
* Move minRssi in config_BT.h
Move var definitions next to compilation var definitions
* Introduce UseExtDecoder when is def MQTTDecodeTopic
Replace #ifdef MQTTDecodeTopic by #if UseExtDecoder
* Rename AttemptBLECOnnect to AttemptBLEConnect
* Create a struct (BTConfig_s) for BT configuration data
Create a default config for BTConfig_s (BTConfig_default) based on defines
Create a global variable (BTConfig) to hold live BT configuration data and initialize it
Move bleConnect to BTConfig
* Move BLEscanBeforeConnect in BTConfig
* Move BLEinterval in BTConfig
* Move PublishOnlySensors in BTConfig
* Move hassPresence in BTConfig
* Move minRssi into BTConfig
* Introduce presenceTopic into BTConfig
* Move MQTTDecodeTopic as extDecoderTopic into BTConfig
* Mutate UseExtDecoder as runtime var BTConfig.extDecoderTopic
* Remove ServicedataMinLength (unused)
Always declare AttemptBLEConnect & BLE_FILTER_CONNECTABLE
* Mutate BLE_FILTER_CONNECTABLE as runtime parameter BTConfig.filterConnectable
* Mutate pubKnownBLEServiceData as runtime var in BTConfig
Mutate pubUnknownBLEServiceData as runtime var in BTConfig
Mutate pubBLEManufacturerData as runtime var in BTConfig
Mutate pubUnknownBLEManufacturerData as runtime var in BTConfig
Mutate pubBLEServiceUUID as runtime var in BTConfig
* Mutate useBeaconUuidForTopic as runtime var in BTConfig
Mutate useBeaconUuidForPresence as runtime var in BTConfig
* Small optimization
* Formatting of config_BT
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Add OpenHAB3 tutorial and BLE binary
* Small text changes
Just a few small text changes, also writing out OMG as OpenMQTTGateway, probably clearer for new to OMG users.
Co-authored-by: DigiH <github@digih.net>
* Bump Theengs Decoder to v0.6.1
* Differentiate a FASTLed environment
* remove BT from the nodemcuv2-all-test env as it is already tested into nodemcuv2-ble
* Decoder 0.6.2
Co-authored-by: DigiH <github@digih.net>
* Publishing/receiving inconsistencies
* General platformio.ini changes
General platformio.ini changes to allow for publishing/receiving settings to be defined in User_cofig.h instead of them only working if defined in the environments. Kept separate so far for discussion.
* Use a task to process immediate BLE actions to prevent MQTT disconnection if the action takes too long to complete.
* Add state_on and state_off parameters to createDiscovery
New IBT-2X version
XMTZX04HM extension
XMTZX05HM extension
Add temperature decoding to JQJCY01M
Fix IBT 6XS
Replace lbs by lb
Add SOLIS 6 Probes BBQ
Add temp to JQJCY01M
Update XMTZC05HM to include XMTZC02HM
Just some minor code cleanup
* Rework OOK Receiver sample and rename directory to OOK_Receiver
* Cleaned up diagnostic logging
* Added logging of device decoder return codes ( DEMOD_DEBUG & RTL_DEBUG=4 )
* Fixed some compiler warnings
* Remove std::string as the model id and use decoder enum.
* Update decoder version
* Check model id is in decoder range when launching discovery.
* Add BLEconnect enum MIN/MAX
Includes the following updates to rtl_433_ESP:
1 - Workaround for cc1101 module going deaf after 24 hours, issue #16.
- By default the workaround is enabled, define NO_DEAF_WORKAROUND to remove the workaround
2 - Improved process for updating from rtl_433 for GitHub, almost totally automated.
- FYI - Their is a shell script in the tools subdirectory which does most of the heavy lifting required
3 - Updated device decoders to latest release of rtl_433
- They are now in align with rtl_433 release 21.12
4 - Updated r_api.c to prioritize ook demodulators - feature from rtl_433
5 - Created contrib directory for other device decoders to be merged into code base as part of the rtl_433 update process
6 - Bump library version to 0.0.3
7 - Tuned signal receiver logic and now throw away the first received byte. On testing this appears to dramatically reduce the number of unparsed signals.
8 - Fixed README feedback from @DigiH and updated the wording for 'PUBLISH_UNPARSED'. Also removed serial logging of unparsed messages unless 'PUBLISH_UNPARSED' is set
9 - Fixed gitignore so that the clone of rtl_433 is no longer part of the repository.
10 - Added new DEFINITION to enable rtl_433 verbose mode for a single device decoder. RTL_VERBOSE=##
Northern Man