When the network drops at runtime and the WiFi stack is wedged (e.g. the
ESP32 driver getting stuck after a long uptime, see #2276), the main loop
kept calling wifi_reconnect_bypass() forever with no recovery: the device
stayed stale until a manual reboot. The reboot watchdog only existed in the
ESPWifiManualSetup path, which the default WiFiManager build doesn't compile.
Count consecutive reconnection failures in the runtime loop and ESPRestart(2)
once they exceed maxRetryWatchDog, mirroring the existing manual-setup
watchdog. Gated behind the new WifiReconnectWatchDog flag (default on) so
environments where an unexpected reboot is undesirable can opt out; disabled
for theengs-plug to avoid interrupting the relay state.
Co-authored-by: Claude <noreply@anthropic.com>
- Switch Ethernet RMII clock from GPIO16 to GPIO0 output mode,
freeing GPIO16 for PSRAM chip select (SPICS1) on WROVER-IE
- Enable PSRAM with QIO flash mode and cache workaround flags
- Add PHY pre-power support for ETH_CLOCK_GPIO0_IN mode
- Report PSRAM status and free memory in SYS MQTT topic
Requires Theengs lib-builder update: remove LIBTIME from IRAM
cache workaround (CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=n) to
free ~3.5KB IRAM for the -mfix-esp32-psram-cache-issue flag.
Tested on Theengs Bridge v1.1: 4MB PSRAM detected, Ethernet
100Mbps on GPIO0, BLE scanning nominal.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Refactor GitHub Actions workflows for build, documentation, and linting
- Consolidated build logic into reusable workflows (`task-build.yml` and `task-docs.yml`) to reduce duplication across multiple workflows.
- Introduced `environments.json` to centralize the list of PlatformIO build environments, improving maintainability and clarity.
- Updated `build.yml` and `build_and_docs_to_dev.yml` to utilize the new reusable workflows and environment definitions.
- Enhanced `release.yml` to streamline the release process and integrate documentation generation.
- Created reusable linting workflow (`task-lint.yml`) to standardize code formatting checks across the repository.
- Simplified manual documentation workflow by leveraging the new reusable documentation workflow.
- Improved artifact management and retention policies across workflows.
- Updated dependencies and versions in workflows to ensure compatibility and performance.
CI/CD pipeline agnostic of Workflow Engine and integrated on github actions
- Implemented ci.sh for orchestrating the complete build pipeline.
- Created ci_00_config.sh for centralized configuration of build scripts.
- Created ci_build_firmware.sh for building firmware for specified PlatformIO environments.
- Created ci_prepare_artifacts.sh for preparing firmware artifacts for upload or deployment.
- Created ci_set_version.sh for updating version tags in firmware configuration files.
- Created ci_build.sh to orchestrate the complete build pipeline.
- Created ci_qa.sh for code linting and formatting checks using clang-format.
- Created ci_site.sh for building and deploying VuePress documentation with version management.
- Implemented checks for required tools and dependencies in the new scripts.
- Improved internal scripts for better error handling and logging.
UPDATE the web installer manifest generation and update documentation structure
- Enhanced ci_list-env.sh to list environments from a JSON file.
- Replaced common_wu.py and gen_wu.py scripts with new npm scripts for site generation and previewing on docsgen/gen_wu.js
- Replaced generate_board_docs.py with docsgen/generated_board_docs.js
- Added new npm scripts for integration of site generation on build phase.
- Created preview_site.js to serve locally generated site over HTTPS with improved error handling.
- Added new CI environments for CI builds in environments.json.
- Deleted lint.yml as part of workflow cleanup.
- Enhanced task-build.yml to include linting as a job and added support for specifying PlatformIO version.
- Improved task-docs.yml to handle versioning more effectively and added clean option.
Enhance documentation
- ADD CLEAR Mark of development version of site
- Updated README.md to include detailed workflow dependencies and relationships using mermaid diagrams.
- Improved development.md with a quick checklist for contributors and clarified the code style guide.
- Enhanced quick_start.md with tips for contributors and streamlined the workflow explanation.
LINT FIX
- Refined User_config.h for better formatting consistency.
- Adjusted blufi.cpp and gatewayBT.cpp for improved code readability and consistency in formatting.
- Updated gatewaySERIAL.cpp and mqttDiscovery.cpp to enhance logging error messages.
- Improved sensorDS1820.cpp for better logging of device information.
Add security scan workflows for vulnerability detection
Add SBOM generation and upload to release workflow; update security scan summary handling
Add shellcheck suppor + FIX shellcheck warning
Enhance documentation for CI/CD scripts and workflows, adding details for security scanning and SBOM generation processes
Fix formatting and alignment in BLE connection handling
Reviewed the full web board presentation and the ESP32 web upload. The project uses a modern pattern where data is divided from the presentation layer.
- Removed the `generate_board_docs` script.
- Updated the `gen_wu` script in order to generate `boards-info.json`: the fail that containe all information about the configuration
- Created and isolate the file `boards-info.js` to streamline the parsing of PlatformIO dependencies, modules, environments and improve the handling of library information.
- Introduced vuepress component `BoardEnvironmentTable.vue` that render `boards-info.json` as UI card component
- Introduced vuepress component `FlashEnvironmentSelector.vue` that render a selectred environment from `boards-info.json` and provide esp-web-upload feature on it
- Introduced a new board page `board-selector.md` for improved firmware selection.
- Updated `web-install.md` to enhance the firmware upload process, including a new board environment table.
- Enhanced custom descriptions in `environments.ini` to include HTML links for better user guidance and board image link
Add CC1101 initialization improvements and logging enhancements
Add installation step for PlatformIO dependencies in documentation workflow
Remove ci_set_version.sh script and associated versioning functionality
* Fix comment provisined
Fix PlatformIO version input reference in documentation workflow
Remove outdated Squeezelite-ESP32 installer documentation
- Convert nightly workflow to matrix builds to fix FRAMEWORK_DIR issues
caused by platform_packages conflicts when building sequentially
- Each environment now builds on its own runner, matching build.yml
- Add deploy job that collects all artifacts and deploys docs
- Add extra_scripts to esp32dev-pilight environment to fix implicit
function declaration error with newer GCC toolchain
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* An FSK version for esp32dev-rtl_433 has been added to handle the Bresser 5-in-1 weather station with a standard 868 MHz c1101
* Change platform and DGateway_Name
* add '-DvalueAsATopic=true' to RF based environments
add '-DvalueAsATopic=true' to RF based environments. Required to support changes in zgatewayRF.ino for Home Assistant discoverability
* Modify gatewayRF to improve Home Assistant auto discoverability
Pass "recieved" as the type argument and switchRF[0] as the subtype argument to announceDeviceTrigger() which will cause recieved codes to be picked up by home assistant as triggers, i.e. When setting up automations in Home Assistant, selecting a `device` trigger and an OMG device will allow the user to select a code picked up during the autoDiscover window as the trigger for the automation, for example "1394004" recieved. In order to support this, the `'-DvalueAsATopic=true'` argument must be added to all environments using the RF Library
Also change getUniqueId() call to remove leading '-' which will prevent MQTT topics having '--' in them
---------
Co-authored-by: James Carey <james.carey@uws.ac.uk>
Refactor LED handling into a library
Use a task instead of relying on the loop for precise timing
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Gaterway states to improve LED management
Make the sleep function accessible outside BT
BREAKING remove sleep for ESP8266
BREAKING lowpowermode API changed to powermode and new mode definition
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Enable the management of different connections at runtime with a set of certs for each.
Add parameters to the WiFi Manager onboarding, client certificates, and certificate validation
* First build with IDF, tested with esp32dev-ble only.
* Fix frameworks for non-esp32 boards
* Add blufi support.
* Adds an environment to use esp-idf and Arduino as a component to facilitate incorporating blufi for onboarding and configuration.
---------
Co-authored-by: h2zero <powellperalata@gmail.com>
* [FSK] Add Lilygo Heltec environment with FSK modulation
Enable RTL_433 frequency and active receiver change with WebUI
Add FSK environment for Heltec and Lilygo
* [SYS] Improve central queue stability
Improve central queue stability and add metrics
* Change partition for esp32dev-pilight-somfy-cc1101
to avoid program size too big error message with esp32dev-pilight-somfy-cc1101
* Only check for gateway updates at the start
to avoid consuming extra memory during operations
Publish the information about the available release with the retain flag
* [SYS] Configuration portal for Ethernet board
Enable Wifi Manager as a configuration portal for Ethernet boards, also leverage the Wifi Access point as a fallback connectivity method
Add link to the WebUI from HA and reduce key length
* Remove unnecessary environment
Now that one environment cans support wifi and ethernet, merge the 2
* [LORA] Capability to change LORA frequency and Add OLED
Merge of the 2 environments for TTGO V1
* Merge messages keys with upper level json
* Id as a sub topic
* Add display and state measures
* Add frequency configuration through WebUI
* Add parameters
* Add auto discovery
* Add node example for ttgo lora32 v1
* Add environments and fix scope
* Support for sync word as a byte
* Fix TX Power setting
* Add LoRa gateway description
* Add onlyknown filter
* User friendly manual network configuration
* Add manual network config to the docs
* Add manual network config to the test env
Co-authored-by: DigiH <github@digih.net>
* [DISC] Add runtime configuration for OpenHAB
Add an MQTT configurable system key "ohdiscovery" for OpenHAB auto discovery
* Docs and environments update
