[SYS] User friendly manual network configuration (#1715)

* User friendly manual network configuration

* Add manual network config to the docs

* Add manual network config to the test env

Co-authored-by: DigiH <github@digih.net>

environments.ini

@@ -118,6 +118,12 @@ build_flags =
   '-DESP32_EXT0_WAKE_PIN=GPIO_NUM_14' ;Should a water leak be detected immediatly wake the ESP32 and report the problem
   '-DESP32_EXT0_WAKE_PIN_STATE=0' ;Should a water leak be detected immediatly wake the ESP32 and report the problem, sensor state to look for wakeup
   '-UMQTT_HTTPS_FW_UPDATE' ;disable HTTPS firmware updating
+  '-DNetworkAdvancedSetup=true'
+  '-DNET_IP="192.168.1.99"'
+  '-DNET_MASK="255.255.255.0"'
+  '-DNET_GW="192.168.1.1"'
+  '-DNET_DNS="1.1.1.1"'
+
 [env:esp32dev-rf]
 platform = ${com.esp32_platform}
 board = esp32dev
@@ -591,7 +597,7 @@ custom_hardware = M5 ATOM Lite
 
 [env:esp32doitv1-aithinker-r01-sx1278]
 platform = ${com.esp32_platform}
-board = esp32doit-devkit-v1 
+board = esp32doit-devkit-v1
 board_build.partitions = min_spiffs.csv
 lib_deps =
   ${com-esp32.lib_deps}
@@ -607,7 +613,7 @@ build_flags =
   '-DZgatewayRTL_433="rtl_433"'
   '-DZradioSX127x="SX127x"'
 ; *** rtl_433_ESP Options ***
-   '-DONBOARD_LED=LED_BUILTIN'  
+   '-DONBOARD_LED=LED_BUILTIN'
 ;  '-DRTL_DEBUG=4'           ; rtl_433 verbose mode
 ;  '-DRTL_VERBOSE=58'          ; LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W, TX145wsdth sensor
 ;  '-DRAW_SIGNAL_DEBUG=true'   ; display raw received messages
@@ -979,7 +985,7 @@ lib_deps =
   ${com-esp32.lib_deps}
   ${libraries.ble}
   ${libraries.decoder}
-build_flags = 
+build_flags =
   ${env.build_flags}
   ${com-esp32.build_flags}
   '-DZgatewayBT="BT"'
@@ -1571,7 +1577,7 @@ build_flags =
   '-DWM_DEBUG_LEVEL=1' ;DEBUG_NOTIFY=1, default value
 ; Serial output via USB
   '-DCONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=true'
-  '-DCONFIG_ESP_CONSOLE_UART=ESP_CONSOLE_USB_SERIAL_JTAG'   
+  '-DCONFIG_ESP_CONSOLE_UART=ESP_CONSOLE_USB_SERIAL_JTAG'
 
 [env:thingpulse-espgateway]
 platform = ${com.esp32_platform}
@@ -1633,4 +1639,4 @@ build_flags =
 ;  '-DsimplePublishing=true'
 custom_description = BLE Gateway using ethernet, requires PIO configuration
 custom_hardware = ThingPulse gateway single ESP32
-  
+