Ryan Powell
585df9a420
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp ( #2177 )
...
* Update arduino core to 3.1.1
* Fix Blufi build
* Update arduinojson, fix build errors with idf
* Fix narrowing
* fix RF builds
* WIP-Convert ino files to cpp
* Fix pilight build
* Fix Somfy actuator build.
* Update esp32dev-rf partition
* Fix Weatherstation build
* Fix GFSunInverter build
* Fix esp32dev-ir build
* Fix ble-aws build
* Fix eth builds
* Fix m5Stack missing pins_arduino.h
* Fix build errors for M5 stack/tough, others are upstream issues.
* Fix RTL 433 build - remaining errors are from radolib
* Fix nodemcu build
* fix 2g builds
* Fix serial build
* Fix actuator on off builds
* Fix SSD1306 build - remaining errors are from radiolib
* Fix multiple definition of OTAserver_cert
* Fix nodemcu rf2 build
* Fix ADC builds
* Fix sensor builds
* Fix LORA builds
* Fix multi-receiver builds - remaining errors are in radiolib
* Fix fastled builds
* Fix theegns board builds
* Fix broker builds
* Update fastled - old version failed all-test build
* Fix RN8209 builds
* Fix max temp actuator builds
* Fix PWM builds
* Fix C37 sensor builds
* Fix HTU21 builds
* Fix INA266 builds
* Fix undefined variables in mqtt discovery
* Fix webui build
* Fix fastled invalid pin error
* Fix wifi manual setup builds
* Fix onewire/all-test build - bin too big error remaining
* Fix theengs plug build
* Fix rfbridge builds
* Fix blufi builds
* Fix undefined functions in serial
* Fix preprocessor definition checks
* Set IDF log level to erre
* Add delay in loop to prevent watchdog timeout
* Use xTaskCreateUniveral to support single core processors
* Remove old HTTPUpdate files - upsteam fixed.
* Cleanup and move common declarations to header file
* Use custom partiton table to fix builds where bin is too large
* Update M5StickC - fixs esp32-m5stick-c-ble build
* Revert to Arduino core 2.x for builds with incompatible libs
* Remove "Z" from file names and rename omg_common to TheengsCommon
* Fix gateway name when using MAC with new Arduino core
* Update IDF config to reduce loop task stack use
* Update esp-nimble-cpp version, corrects BLE uppercase ID's
* Update wifi manager to fix watchdog timeout error
2025-05-06 19:35:50 -05:00
Florian and Florian
3187ed6154
[SERIAL] Enable SERIAL to X communication ( #2068 )
...
Add Serial as a communication layer so as to transmit data to/from serial
Enable discovery of BT sensors through serial
Add serial heartbeat
Change discovery principle for interval and intervalacts, keep them always discovered and deactivate adaptivescan when changed. Instead of removing their discovery when adaptive scan is activated
Increase JSON_MSG_BUFFER_MAX as we are now using const char* and it requires more memory for Arduino Json Deserialization
Co-authored-by: Florian <1technophile@users.noreply.github.com >
2024-09-26 06:55:26 -05:00
Florian
2065d57e11
[BOARDS] Remove Arduino boards ( #1929 )
2024-04-10 15:48:05 -05:00
DigiH
807c668489
Small typo fixes ( #1359 )
...
A few small typo fixes
2022-12-12 22:58:51 +01:00
DigiH
c4300a002f
MQTT-MAC-IP-mDNS ( #1245 )
2022-07-19 12:10:51 -05:00
Riceball LEE
8bced299dd
feat: upgrade to IRremoteESP8266@2.8.2 ( #1214 )
2022-05-13 14:56:02 -05:00
Florian
ac9e8347ed
irremote esp8266 bump to 2.7.15 ( #892 )
...
* irremote esp8266 bump to 2.7.15
* lint format
2021-03-11 15:53:28 -06:00
Florian
e27acee4b6
[IR] Update IRRemoteESP8266 to 2.7.9 ( #743 )
...
Add HITACHI_AC344 CORONA_AC MIDEA24 ZEPEAL SANYO_AC
2020-08-25 09:53:25 -05:00
Florian
1d7b569c6a
Add IR emitter inverter ( #738 )
...
#611 for m5stickc
2020-08-22 20:45:59 -05:00
Florian
12a5033ca3
IR signal forwarding by MQTT
...
differentiate command subject so as to enable the repeat on another gateway
add doc info regarding raw forwarding
2020-06-22 07:04:00 -05:00
Florian
3bee160b48
IRRemote ESP8266 Lib update and add new protocols ( #641 )
2020-06-19 13:11:15 -05:00
Florian
c9e6de1a1c
Replace pin by gpio ( #631 )
...
* replace _PIN by _GPIO
* add mention about the goal of -all binaries
* [breaking] change json key from "pin" to "gpio" for actuatorONOFF
2020-06-13 20:04:36 -05:00
Leon Kiefer
10a9d00aaf
Added clang-format ( #623 )
...
* added .clang-format
* added names to travis jobs
removed deprecated travis option
* check github action
* added .gitignore
2020-06-09 16:09:23 -05:00
Florian
4b1f09b06b
Wifi managers improvements ( #503 )
...
* Add parameters to wifi manager: gateway name and base topic
Enable to restart the ESP and erase the parameters by MQTT
2019-12-07 10:18:42 +01:00
Florian
3a4ccdcc9f
Update ESP IR library & IR gateway improvments ( #480 )
...
* update irremoteesp8266
* add new protocols, simplify API and publish protocol name
-added the following protocols:
#define IR_LEGOPF
#define IR_MITSUBISHI_HEAVY_88
#define IR_MITSUBISHI_HEAVY_152
#define IR_DAIKIN216
#define IR_SHARP_AC
#define IR_GOODWEATHER
#define IR_INAX
#define IR_DAIKIN160
#define IR_NEOCLIMA
#define IR_DAIKIN176
#define IR_DAIKIN128
#define IR_AMCOR
#define IR_DAIKIN152
#define IR_MITSUBISHI136
#define IR_MITSUBISHI112
#define IR_HITACHI_AC424
-changed the send API, now you can use the protocol name directly exemple NEC instead of IR_NEC
-publish the protocol name to MQTT added to the number
-replace long by long long
* missing repeat definitions
and set default repeat value to 0
* move protocol name retrieving outside arduino scope
* put all protocols with capital letters
* modify doc
* add long long activation for arduino json on test_config file
2019-11-02 12:49:05 +01:00
Florian
d231c5bda1
add m5stick-c board ( #473 )
2019-10-22 21:07:59 +02:00
1technophile
818be244dd
ESP32 Avoid overlap between IR_RECEIVER_PIN and RF_RECEIVER_PIN
...
#443
2019-09-20 23:33:38 +02:00
Florian
8471585d3d
Platformio integration ( #424 )
...
* adaptation of structure to platformio
* also remove zgatewayRF315 (not usefull)
* replace boolean by bool
#155
2019-07-18 22:45:45 +02:00
Ryan Powell