Remove Test_config.h file (#712)
* Remove Test_config.h file It was used for Arduino IDE CI, as we are now using PIO this file is no longer needed And remove test folder.
This commit is contained in:
Florian authored and GitHub committed
1 parent
61f7843e40
commit
c6966aa0d9
3 files changed
-212
No files matched your search
@@ -14,9 +14,3 @@ jobs:
|
||||
source: "./main"
|
||||
extensions: "h,ino"
|
||||
clangFormatVersion: 9
|
||||
- name: Check test format
|
||||
uses: DoozyX/clang-format-lint-action@v0.6
|
||||
with:
|
||||
source: "./test"
|
||||
extensions: "h,ino"
|
||||
clangFormatVersion: 9
|
||||
@@ -19,11 +19,6 @@ Review your code, compile it for Arduino Uno and ESP8266
|
||||
|
||||
Test it locally on your hardware config
|
||||
|
||||
If you modify `User_config.h` during your developments you need to report your modifications into Test_config.h
|
||||
https://github.com/1technophile/OpenMQTTGateway/blob/master/tests/Test_config.h
|
||||
Indeed during the continuous integration process `User_config.h` is replaced by `Test_config.h`.
|
||||
`Test_config.h` as much more gateway/sensors enabled for the test than the default `User_config.h`
|
||||
|
||||
Emit a pull request
|
||||
|
||||
Verify the GitHub Actions CI compilation results
|
||||
|
||||
@@ -1,201 +0,0 @@
|
||||
/*
|
||||
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
||||
|
||||
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
||||
Send and receiving command by MQTT
|
||||
|
||||
This program enables to:
|
||||
- receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
|
||||
- publish MQTT data to a different topic related to received 433Mhz signal
|
||||
- receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
|
||||
- publish MQTT data to a different topic related to received IR signal
|
||||
- publish MQTT data to a different topic related to BLE devices rssi signal
|
||||
|
||||
Copyright: (c)Florian ROBERT
|
||||
|
||||
This file is part of OpenMQTTGateway.
|
||||
|
||||
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
OpenMQTTGateway is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef user_config_h
|
||||
#define user_config_h
|
||||
/*-------------------VERSION----------------------*/
|
||||
#define OMG_VERSION "version_tag"
|
||||
|
||||
/*-------------CONFIGURE WIFIMANAGER-------------*/
|
||||
/*
|
||||
* The following parameters are set during the WifiManager setup process:
|
||||
* - wifi_ssid
|
||||
* - wifi_password
|
||||
* - mqtt_user
|
||||
* - mqtt_pass
|
||||
* - mqtt_server
|
||||
* - mqtt_port
|
||||
*
|
||||
* To completely disable WifiManager, define ESPWifiManualSetup.
|
||||
* If you do so, please don't forget to set these variables before compiling
|
||||
*
|
||||
* Otherwise you can provide these credentials on the web interface after connecting
|
||||
* to the access point with your password (SSID: WifiManager_ssid, password: WifiManager_password)
|
||||
*/
|
||||
/*-------------DEFINE GATEWAY NAME BELOW IT CAN ALSO BE DEFINED IN platformio.ini----------------*/
|
||||
#ifndef Gateway_Name
|
||||
# define Gateway_Name "OpenMQTTGateway"
|
||||
#endif
|
||||
|
||||
#define Base_Topic "home/"
|
||||
|
||||
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
|
||||
//#define NetworkAdvancedSetup true //uncomment if you want to set advanced network parameters for arduino boards, not uncommented you can set the IP and mac only
|
||||
#ifdef NetworkAdvancedSetup // for arduino boards advanced config
|
||||
// these values are only used if no dhcp configuration is available
|
||||
const byte ip[] = {192, 168, 1, 99}; //ip adress
|
||||
const byte gateway[] = {0, 0, 0, 0}; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
|
||||
const byte Dns[] = {0, 0, 0, 0}; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
|
||||
const byte subnet[] = {255, 255, 255, 0}; //ip adress
|
||||
#endif
|
||||
|
||||
#if defined(ESP8266) || defined(ESP32) // for nodemcu, weemos and esp8266
|
||||
//#define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
|
||||
#else // for arduino boards
|
||||
const byte ip[] = {192, 168, 1, 99}; //ip adress
|
||||
const byte mac[] = {0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95}; //W5100 ethernet shield mac adress
|
||||
#endif
|
||||
|
||||
#if defined(ESPWifiManualSetup) // for nodemcu, weemos and esp8266
|
||||
# ifndef wifi_ssid
|
||||
# define wifi_ssid "wifi ssid"
|
||||
# endif
|
||||
# ifndef wifi_password
|
||||
# define wifi_password "wifi password"
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#define WifiManager_password "your_password" //this is going to be the WPA2-PSK password for the initial setup access point
|
||||
#define WifiManager_ssid Gateway_Name //this is the network name of the initial setup access point
|
||||
#define WifiManager_ConfigPortalTimeOut 120
|
||||
#define WifiManager_TimeOut 5
|
||||
|
||||
//#define MDNS_SD //uncomment if you want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
|
||||
|
||||
//set minimum quality of signal so it ignores AP's under that quality
|
||||
#define MinimumWifiSignalQuality 8
|
||||
|
||||
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
|
||||
//MQTT Parameters definition
|
||||
#define parameters_size 20
|
||||
#define mqtt_topic_max_size 100
|
||||
#define mqtt_max_packet_size 128
|
||||
|
||||
#ifndef MQTT_USER
|
||||
# define MQTT_USER "your_username"
|
||||
#endif
|
||||
#ifndef MQTT_PASS
|
||||
# define MQTT_PASS "your_password"
|
||||
#endif
|
||||
#ifndef MQTT_SERVER
|
||||
# define MQTT_SERVER "192.168.1.17"
|
||||
#endif
|
||||
#ifndef MQTT_PORT
|
||||
# define MQTT_PORT "1883"
|
||||
#endif
|
||||
|
||||
#define version_Topic "/version"
|
||||
#define will_Topic "/LWT"
|
||||
#define will_QoS 0
|
||||
#define will_Retain true
|
||||
#define will_Message "Offline"
|
||||
#define Gateway_AnnouncementMsg "Online"
|
||||
|
||||
#define maxMQTTretry 4 //maximum MQTT connection attempts before going to wifi setup
|
||||
|
||||
/*-------------DEFINE YOUR OTA PARAMETERS BELOW----------------*/
|
||||
#define ota_hostname "OTAHOSTNAME"
|
||||
#define ota_password "OTAPASSWORD"
|
||||
#define ota_port 8266
|
||||
/*-------------DEFINE PINs FOR STATUS LEDs----------------*/
|
||||
#ifdef ESP8266
|
||||
# define led_receive 40
|
||||
# define led_send 42
|
||||
# define led_info 44
|
||||
#elif ESP32
|
||||
# define led_receive 40
|
||||
# define led_send 42
|
||||
# define led_info 44
|
||||
#elif __AVR_ATmega2560__ //arduino mega
|
||||
# define led_receive 40
|
||||
# define led_send 42
|
||||
# define led_info 44
|
||||
#else //arduino uno/nano
|
||||
# define led_receive 40
|
||||
# define led_send 42
|
||||
# define led_info 44
|
||||
#endif
|
||||
|
||||
// VCC ------------D|-----------/\/\/\/\ ----------------- Arduino PIN
|
||||
// LED Resistor 270-510R
|
||||
#ifndef TRIGGER_GPIO
|
||||
# ifdef ESP8266
|
||||
//# define TRIGGER_GPIO 14 // pin D5 as full reset button (long press >10s)
|
||||
# elif ESP32
|
||||
//# define TRIGGER_GPIO 0 // boot button as full reset button (long press >10s)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/*----------------------------OTHER PARAMETERS-----------------------------*/
|
||||
#ifdef ZgatewaySRFB
|
||||
# define SERIAL_BAUD 19200
|
||||
#else
|
||||
# define SERIAL_BAUD 115200
|
||||
#endif
|
||||
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
|
||||
/*--------------MQTT general topics-----------------*/
|
||||
// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
|
||||
#define subjectMQTTtoX "/commands/#"
|
||||
#define subjectMultiGTWKey "toMQTT"
|
||||
#define subjectGTWSendKey "MQTTto"
|
||||
|
||||
// key used for launching commands to the gateway
|
||||
#define restartCmd "restart"
|
||||
#define eraseCmd "erase"
|
||||
|
||||
// define if we concatenate the values into the topic
|
||||
//#define valueAsASubject true
|
||||
|
||||
//variables to avoid duplicates
|
||||
#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
|
||||
|
||||
#ifdef ESP32
|
||||
//#define multiCore //uncomment to use multicore function of ESP32 for BLE
|
||||
#endif
|
||||
|
||||
#if defined(ESP8266) || defined(ESP32)
|
||||
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 1024 or higher it is causing unexpected behaviour on ESP8266
|
||||
# define SIGNAL_SIZE_UL_ULL uint64_t
|
||||
# define STRTO_UL_ULL strtoull
|
||||
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
|
||||
# define JSON_MSG_BUFFER 512 // Json message max buffer size, don't put 1024 or higher it is causing unexpected behaviour on ESP8266
|
||||
# define SIGNAL_SIZE_UL_ULL uint64_t
|
||||
# define STRTO_UL_ULL strtoul
|
||||
#else // boards with smaller memory
|
||||
# define JSON_MSG_BUFFER 64 // Json message max buffer size, don't put 1024 or higher it is causing unexpected behaviour on ESP8266
|
||||
# define SIGNAL_SIZE_UL_ULL uint32_t
|
||||
# define STRTO_UL_ULL strtoul
|
||||
#endif
|
||||
|
||||
#define TimeBetweenReadingSYS 120000 // time between system readings (like memory)
|
||||
#define subjectSYStoMQTT "/SYStoMQTT"
|
||||
#define subjectMQTTtoSYSset "/commands/MQTTtoSYS/config"
|
||||
|
||||
#endif
|
||||
Reference in new issue
Block a user