add actuator

Possibility to command a pin HIGH/LOW by MQTT #192

OpenMQTTGateway.ino

@@ -295,6 +295,9 @@ void setup()
   #ifdef ZsensorTSL2561
     setupZsensorTSL2561();
   #endif
+  #ifdef ZactuatorONOFF
+    setupONOFF();
+  #endif
   #ifdef ZgatewayIR
     setupIR();
   #endif
@@ -681,6 +684,9 @@ digitalWrite(led_send, LOW);
 #ifdef ZgatewayRFM69
   MQTTtoRFM69(topicOri, datacallback);
 #endif
+#ifdef ZactuatorONOFF
+  MQTTtoONOFF(topicOri, datacallback);
+#endif
 //YELLOW OFF
 digitalWrite(led_send, HIGH);
 }
@@ -715,6 +721,10 @@ void revert_hex_data(char * in, char * out, int l){
   out[l-1] = '\0';
 }
 
+bool to_bool(String const& s) { // thanks Chris Jester-Young from stackoverflow
+     return s != "0";
+}
+
 //trace
 void trc(String msg){
   if (TRACE) {

User_config.h

@@ -93,6 +93,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   #include "config_IR.h"
   #define ZgatewayBT
   #include "config_BT.h"
+  //#define ZactuatorONOFF
+  //#include "config_ONOFF.h"
   //#define ZsensorINA226
   //#include "config_INA226.h"
   //#define ZsensorHCSR501
@@ -117,6 +119,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   //#include "config_IR.h"
   #define ZgatewayBT
   #include "config_BT.h"
+  //#define ZactuatorONOFF
+  //#include "config_ONOFF.h"
   //#define ZsensorINA226
   //#include "config_INA226.h"
   //#define ZsensorHCSR501
@@ -141,6 +145,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   #include "config_IR.h"
   #define ZgatewayBT
   #include "config_BT.h"
+  //#define ZactuatorONOFF
+  //#include "config_ONOFF.h"
   //#define ZsensorINA226
   //#include "config_INA226.h"
   //#define ZsensorDHT

ZactuatorONOFF.ino

@@ -0,0 +1,54 @@
+/*  
+  OpenMQTTGateway Addon  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+    Output pin High or Low
+  
+    Copyright: (c)Florian ROBERT
+    
+    Contributors:
+    - 1technophile
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifdef ZactuatorONOFF
+
+void setupONOFF(){
+  trc(F("ACTUATOR_ONOFF_PIN"));
+  trc(String(ACTUATOR_ONOFF_PIN));
+  //init
+  pinMode(ACTUATOR_ONOFF_PIN, OUTPUT);
+  trc(F("Set to OFF"));
+  digitalWrite(ACTUATOR_ONOFF_PIN, LOW);
+  trc(F("ZactuatorONOFF setup done "));
+}
+
+void MQTTtoONOFF(char * topicOri, char * datacallback){
+
+  bool boolSWITCHTYPE;
+  boolSWITCHTYPE = to_bool(datacallback);
+  String topic = topicOri;
+ 
+  if ((topic == subjectMQTTtoONOFF)){
+    trc(F("MQTTtoONOFF"));
+    trc(String(boolSWITCHTYPE));
+    digitalWrite(ACTUATOR_ONOFF_PIN, boolSWITCHTYPE);
+  }
+}
+#endif
+

ZgatewayRF2.ino

@@ -212,7 +212,4 @@ void MQTTtoRF2(char * topicOri, char * datacallback) {
   }
 }
 
-bool to_bool(String const& s) { // thanks Chris Jester-Young from stackoverflow
-     return s != "0";
-}
 #endif

config_ONOFF.h

@@ -0,0 +1,33 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+   This files enables to set your parameter for the ON OFF actuator
+  
+    Copyright: (c)Florian ROBERT
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*----------------------------USER PARAMETERS-----------------------------*/
+/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
+#define subjectMQTTtoONOFF  Base_Topic Gateway_Name "/commands/MQTTtoONOFF"
+
+/*-------------------PIN DEFINITIONS----------------------*/
+#define ACTUATOR_ONOFF_PIN 4 
+

tests/Test_config.h

@@ -91,6 +91,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   #include "config_IR.h"
   #define ZgatewayBT
   #include "config_BT.h"
+  #define ZactuatorONOFF
+  #include "config_ONOFF.h"
   #define ZsensorINA226
   #include "config_INA226.h"
   #define ZsensorHCSR501
@@ -115,6 +117,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   //#include "config_IR.h"
   #define ZgatewayBT
   #include "config_BT.h"
+  #define ZactuatorONOFF
+  #include "config_ONOFF.h"
   //#define ZsensorINA226
   //#include "config_INA226.h"
   //#define ZsensorHCSR501
@@ -139,6 +143,8 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
   //#include "config_IR.h"
   //#define ZgatewayBT
   //#include "config_BT.h"
+  //#define ZactuatorONOFF
+  //#include "config_ONOFF.h"
   //#define ZsensorINA226
   //#include "config_INA226.h"
   //#define ZsensorDHT