184 lines
7.3 KiB
C
184 lines
7.3 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This program enables to:
|
|
- receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received 433Mhz signal
|
|
- receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received IR signal
|
|
- publish MQTT data to a different topic related to BLE devices rssi signal
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
/*-------------------VERSION----------------------*/
|
|
#define OMG_VERSION "0.7"
|
|
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
|
|
//MQTT Parameters definition
|
|
//#define mqtt_server_name "www.mqtt_broker.com" // instead of defining the server by its IP you can define it by its name, uncomment this line and set the correct MQTT server host name
|
|
char mqtt_user[20] = "your_username"; // not compulsory only if your broker needs authentication
|
|
char mqtt_pass[20] = "your_password"; // not compulsory only if your broker needs authentication
|
|
char mqtt_server[40] = "192.168.1.17";
|
|
char mqtt_port[6] = "1883";
|
|
#define Gateway_Name "/OpenMQTTGateway"
|
|
#define Base_Topic "home"
|
|
#define WifiManager_password "your_password"
|
|
#define version_Topic Base_Topic Gateway_Name "/version"
|
|
#define will_Topic Base_Topic Gateway_Name "/LWT"
|
|
#define will_QoS 0
|
|
#define will_Retain true
|
|
#define will_Message "Offline"
|
|
#define Gateway_AnnouncementMsg "Online"
|
|
#define MDNS_SD //comment if you don't want to use mdns for discovering automatically your ip server
|
|
|
|
//set minimu quality of signal so it ignores AP's under that quality
|
|
#define MinimumWifiSignalQuality 8
|
|
//#define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
|
|
|
|
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
|
|
// Update these with values suitable for your network.
|
|
#ifdef ESP32 // for nodemcu, wemos, esp32 and esp8266
|
|
#define wifi_ssid "wifi ssid"
|
|
#define wifi_password "wifi password"
|
|
#else // for arduino + W5100
|
|
const byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
|
|
#endif
|
|
|
|
const byte ip[] = { 192, 168, 1, 99 }; //ip adress
|
|
// Advanced network config (optional) if you want to use these parameters uncomment line 158, 172 and comment line 171 of OpenMQTTGateway.ino
|
|
const byte gateway[] = { 192, 168, 1, 1 }; //ip adress
|
|
const byte Dns[] = { 192, 168, 1, 1 }; //ip adress
|
|
const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
|
|
|
|
/*-------------DEFINE YOUR OTA PARAMETERS BELOW----------------*/
|
|
#define ota_hostname "OTAHOSTNAME"
|
|
#define ota_password "OTAPASSWORD"
|
|
#define ota_port 8266
|
|
/*-------------DEFINE PINs FOR STATUS LEDs----------------*/
|
|
#define led_receive 40
|
|
#define led_send 42
|
|
#define led_error 44
|
|
|
|
// VCC ------------D|-----------/\/\/\/\ ----------------- Arduino PIN
|
|
// LED Resistor 270-510R
|
|
|
|
/*-------------DEFINE THE MODULES YOU WANT BELOW----------------*/
|
|
//Addons and module management, comment the Z line and the config file if you don't use
|
|
#ifdef ESP8266 // for nodemcu, weemos and esp8266
|
|
#define ZgatewayRF
|
|
#include "config_RF.h"
|
|
#define ZgatewaySRFB
|
|
#include "config_SRFB.h"
|
|
#define ZgatewayRF2
|
|
#define ZgatewayIR
|
|
#include "config_IR.h"
|
|
#define ZgatewayBT
|
|
#include "config_BT.h"
|
|
#define ZactuatorONOFF
|
|
#include "config_ONOFF.h"
|
|
#define ZsensorINA226
|
|
#include "config_INA226.h"
|
|
#define ZsensorHCSR501
|
|
#include "config_HCSR501.h"
|
|
#define ZsensorADC
|
|
#include "config_ADC.h"
|
|
#define ZsensorBH1750
|
|
#include "config_BH1750.h"
|
|
#define ZsensorBME280
|
|
#include "config_TSL2561.h"
|
|
#define ZsensorTSL2561
|
|
#include "config_BME280.h"
|
|
#define ZsensorDHT // If you uncomment this you can't use I2C due to the fact that I2C use also D1
|
|
#include "config_DHT.h"
|
|
#define ZgatewayRFM69 // If you uncomment this you can't use RF and BT due to the fact that RF use also D8 and BT use also D6/D7
|
|
#include "config_RFM69.h"
|
|
#elif ESP32
|
|
#define ZgatewayRF
|
|
#include "config_RF.h"
|
|
#define ZgatewayRF2
|
|
//#define ZgatewayIR
|
|
//#include "config_IR.h"
|
|
#define ZgatewayBT
|
|
#include "config_BT.h"
|
|
#define ZactuatorONOFF
|
|
#include "config_ONOFF.h"
|
|
//#define ZsensorINA226
|
|
//#include "config_INA226.h"
|
|
//#define ZsensorHCSR501
|
|
//#include "config_HCSR501.h"
|
|
//#define ZsensorADC
|
|
//#include "config_ADC.h"
|
|
//#define ZsensorBH1750
|
|
//#include "config_BH1750.h"
|
|
//#define ZsensorBME280
|
|
//#include "config_BME280.h"
|
|
#define ZsensorDHT // If you uncomment this you can't use I2C due to the fact that I2C use also D1
|
|
#include "config_DHT.h"
|
|
//#define ZgatewayRFM69 // If you uncomment this you can't use RF and BT due to the fact that RF use also D8 and BT use also D6/D7
|
|
//#include "config_RFM69.h"
|
|
#else // for arduino mega + W5100
|
|
#define ZgatewayRF
|
|
#include "config_RF.h"
|
|
//#define ZgatewayRF2 // too big for UNO
|
|
//#define ZgatewayRFM69 not tested
|
|
//#include "config_RFM69.h"
|
|
//#define ZgatewayIR
|
|
//#include "config_IR.h"
|
|
//#define ZgatewayBT
|
|
//#include "config_BT.h"
|
|
//#define ZactuatorONOFF
|
|
//#include "config_ONOFF.h"
|
|
//#define ZsensorINA226
|
|
//#include "config_INA226.h"
|
|
//#define ZsensorDHT
|
|
//#include "config_DHT.h"
|
|
//#define ZsensorBH1750
|
|
//#include "config_BH1750.h"
|
|
//#define ZsensorBME280
|
|
//#include "config_BME280.h"
|
|
//#define ZsensorHCSR501
|
|
//#include "config_HCSR501.h"
|
|
//#define ZsensorADC
|
|
//#include "config_ADC.h"
|
|
//#define ZgatewayRFM69 not tested
|
|
//#include "config_RFM69.h"
|
|
#endif
|
|
/*----------------------------OTHER PARAMETERS-----------------------------*/
|
|
#ifdef ZgatewaySRFB
|
|
#define SERIAL_BAUD 19200
|
|
#else
|
|
#define SERIAL_BAUD 115200
|
|
#endif
|
|
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
|
|
/*--------------MQTT general topics-----------------*/
|
|
// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
|
|
#define subjectMQTTtoX Base_Topic Gateway_Name "/commands/#"
|
|
#define subjectMultiGTWKey "toMQTT"
|
|
|
|
//variables to avoid duplicates
|
|
#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
|
|
|
|
//uncomment to use multicore function of ESP32 for BLE
|
|
#define multiCore
|
|
|
|
#define TimeBetweenReadingSYS 30000 // time between system readings (like memory)
|
|
/*-------------------ACTIVATE TRACES----------------------*/
|
|
#define TRACE 1 // 0= trace off 1 = trace on
|